Silicone Elbows XL
QSP Silicone Hose XL - 45° Elbow - 38mm - Black
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 90° Elbow - 35mm - Blue
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 16mm - Black
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 16mm - Blue
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 19mm - Black
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 19mm - Blue
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 22mm - Black
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 22mm - Blue
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 25mm - Black
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 25mm - Blue
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 28mm - Black
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 28mm - Blue
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 30mm - Black
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 30mm - Blue
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 32mm - Black
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 32mm - Blue
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 35mm - Black
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 35mm - Blue
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 38mm - Blue
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 51mm - Black
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 51mm - Blue
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 60mm - Black
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 60mm - Blue
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose XL - 45° Elbow - 63mm - Black
Description Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).