Dash 20 (-20 AN)
Union Female Female Dash 20 AN20 Straight Black
DASH 20 female to female connector in black Reusable aluminium hose end with UNF thread (Dash system) and 360° swivel. This allows you to make up your own lines to suit individual needs and numerous applications (oil, water, fuel, brake and clutch systems) and install them stress-free. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our braided lines can be used (alternatively, lines from other manufacturers with the same dimensions). The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5,56mm / outer diameter 11,13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8,73mm / outer diameter 13,89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11,12mm / outer diameter 16,28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14,27mm / outer diameter 20,24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17,47mm / outer diameter 23,82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22,20mm / outer diameter 30,50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28,50mm / outer diameter 35,81mm
Weld-On Adapter Aluminium Dash 20 AN20
Weld-on adapter aluminium Dash 20 AN20 Reusable aluminium hose end with UNF thread (Dash system) and 360° swivel. This allows you to make up your own lines to suit individual needs and numerous applications (oil, water, fuel, brake and clutch systems) and install them stress-free. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our braided lines can be used (alternatively, lines from other manufacturers with the same dimensions). The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5,56mm / outer diameter 11,13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8,73mm / outer diameter 13,89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11,12mm / outer diameter 16,28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14,27mm / outer diameter 20,24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17,47mm / outer diameter 23,82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22,20mm / outer diameter 30,50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28,50mm / outer diameter 35,81mm
QSP Fitting Straight AN20 Dash 20
Straight aluminium hose fitting with cutting ring. This fitting is intended for use with stainless-steel- or nylon-braided rubber hoses and, when correctly fitted, provides a secure, leak-tight connection. The integrated cutting ring ensures the hose sits firmly in the fitting. Installation is simple and the design gives a clean look. Product features: Straight design with cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN6 to AN16 available Robust design Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
QSP Lightweight Fitting Straight AN20 Dash 20
Straight aluminium hose fitting without cutting ring. This fitting is intended for use with stainless-steel-braided or nylon-braided rubber hoses and, when correctly fitted, provides a secure, leak-tight connection. Fitting is simple and the design gives a clean look. Product features: Straight design without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
QSP Lightweight Fitting 120° AN20 Dash 20
120° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel braided or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed. The 120° design allows angled line routing in suitable installation situations. Fitting is simple and the design gives a clean look. Product features: 120° version without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
QSP Lightweight Fitting 150° AN20 Dash 20
150° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel braided or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed. The 150° design allows angled line routing in special installation situations. Fitting is simple and the design gives a clean look. Product features: 150° version without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
QSP Lightweight Fitting 180° AN20 Dash 20
180° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel braided or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed. The 180° design allows the line to be routed straight back in special installation situations. Fitting is simple and the design gives a clean look. Product features: 180° version without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
QSP Lightweight Fitting 45° AN20 Dash 20
45° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel braided or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed. The 45° design allows slightly angled line routing in tight installation spaces. Fitting is simple and the design gives a clean look. Product features: 45° version without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
QSP Lightweight Fitting 90° AN20 Dash 20
90° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed. The 90° design allows space-saving line routing in tight installation spaces. Fitting is simple and gives a clean look. Product features: 90° version without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
QSP Lightweight Fitting Straight AN20 Dash 20
Straight aluminium hose fitting without cutting ring. This fitting is intended for use with stainless-steel- or nylon-braided rubber hoses and, when correctly fitted, provides a secure, leak-tight connection. Fitting is simple and gives a clean look. Product features: Straight design without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
QSP Lightweight Fitting 120° AN20 Dash 20
120° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed. The 120° design allows angled line routing in suitable installation situations. Fitting is simple and gives a clean look. Product features: 120° version without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
QSP Lightweight Fitting 150° AN20 Dash 20
150° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed. The 150° design allows more sharply angled line routing in special installation situations. Fitting is simple and gives a clean look. Product features: 150° version without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
QSP Lightweight Fitting 180° AN20 Dash 20
180° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed. The 180° design allows the line to be routed straight back in special installation situations. Fitting is simple and gives a clean look. Product features: 180° version without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
QSP Lightweight Fitting 45° AN20 Dash 20
45° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed. The 45° design allows slightly angled line routing in tight installation spaces. Fitting is simple and gives a clean look. Product features: 45° version without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
QSP Lightweight Fitting 90° AN20 Dash 20
90° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed. The 90° design allows space-saving line routing in tight installation spaces. Fitting is simple and gives a clean look. Product features: 90° version without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
QSP Fuel / Oil Hose Stainless Braided AN20 Dash 20 (28,5mm) - p/m1
Fuel/oil hose made from reinforced synthetic rubber with double stainless steel braid – AN4 to AN20 – price per metreHigh-quality Fuel and oil hose with double stainless steel braid, developed for demanding applications in motorsport, vehicle building and industry. The robust construction ensures high pressure resistance, long service life and optimum protection against abrasion and corrosion.The hose consists of a reinforced synthetic rubber inner core, which is sheathed in a double stainless steel braid . This construction provides additional stability as well as protection against external influences and mechanical stress.Thanks to its special design, this hose is compatible with a wide range of fittings. Both connections with cutting ring (cutting edge) and connections without cutting ring can be used without any problems.Product features:High-quality Fuel/oil hose with double stainless steel braidReinforced synthetic rubber inner coreHigh resistance to abrasion and corrosionVery durable and pressure resistantSuitable for various connection typesSuitable for the following media:CoolantOilAirMethanolLubricantsE85 fuelVacuum applicationsTechnical data:Minimum bend radius: 63,5 mm (2,5")Sizes:Available immediately: AN4 – AN20Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines
QSP Fuel / Oil Hose Nylon Braided AN20 Dash 20 (28,5mm) - p/m1
Reinforced fuel/oil hose made from synthetic rubber with stainless steel core & nylon braid – AN4 to AN20 – price per metreThis high-quality, reinforced fuel and oil hose was specially developed for applications where high performance, reliability and low weight are crucial. Ideally suited for motorsport, vehicle building, industry and many other technical applications.The hose features a flexible stainless steel inner core, which is embedded in a synthetic chlorinated polyethylene inner layer . This achieves particularly high stability and pressure resistance. The braided nylon outer sheath additionally protects against abrasion, wear and external influences while also providing weight reduction in the vehicle.Thanks to its special construction, this hose is compatible with various fitting types. Both connections with cutting ring (cutting edge) and connections without cutting ring can be used.Product features:Reinforced high-performance hose for fuel and oilFlexible stainless steel inner core for maximum stabilitySynthetic inner lining (CPE) for high resistanceBraided nylon outer sheath for protection against abrasion and wearReduced weight compared with conventional steel-braided hosesHigh flexibility and long service lifeSuitable for the following media:CoolantOilAirMethanolLubricantsE85 fuelVacuum applicationsTechnical data:Minimum bend radius: 63,5 mm (2,5")Sizes:Available immediately: AN4 – AN20Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines
QSP Carburettor Adapter Short Dual Feed 7/8 AN20 to Dash 6 / AN6 Black
Product description This listing is for a QSP aluminium carburettor adapter in short dual-feed version from 7/8 AN20 to Dash 6 / AN6 in black. QSP aluminium carburettor adapter in black. The adapter has an AN10 connection with 7/8 UNF thread and Dash 6 / AN6 connections with AN6 / 9/16 UNF thread. The adapter is suitable for supplying fuel to carburettors and for fuel and oil applications. Suitable for line systems with stainless or nylon braiding and rubber core. Product details Manufacturer QSP Products Item: carburettor adapter Material Aluminium Colour black Design straight Version: short dual feed Size: 7/8 AN20 to Dash 6 / AN6 Thread AN10 / 7/8 UNF Thread: AN6 / 9/16 UNF Thread type AN / Dash / JIC / UNF Reducer AN - AN Application Fuel / oil / carburettor Suitable for hose with stainless steel braiding and rubber core Suitable for hose with nylon braiding and rubber core Swivel no Cutter style no Part number QGCA-06-1010 Packaging unit 1 piece Suitable for Carburettors Fuel lines Oil lines Dash 6 / AN6 connections AN10 connections Lines with stainless steel braiding and rubber core Lines with nylon braiding and rubber core Dual feed Motorsport Vehicle tuning Racing Conversion and project vehicles
QSP Carburettor Adapter Extended Dual Feed 7/8 AN20 to Dash 6 / AN6 Black
Product description This listing is for a QSP aluminium carburettor adapter in extended dual-feed version from 7/8 AN20 to Dash 6 / AN6, in black. QSP aluminium carburettor adapter in black. The adapter has an AN10 connection with 7/8 UNF thread and Dash 6 / AN6 connections with AN6 / 9/16 UNF thread. The adapter is suitable for supplying fuel to carburettors as well as for fuel and oil applications. The 90° design allows space-saving and tidy installation. Suitable for line systems with stainless or nylon braiding and rubber core. Product details Manufacturer QSP Products Item: carburettor adapter Material Aluminium Colour black Design 90° Version: extended dual feed Size: 7/8 AN20 to Dash 6 / AN6 Thread AN10 / 7/8 UNF Thread: AN6 / 9/16 UNF Thread type AN / Dash / JIC / UNF Reducer AN - AN Application Fuel / oil / carburettor Suitable for hose with stainless steel braiding and rubber core Suitable for hose with nylon braiding and rubber core Swivel no Cutter style no Item number QGCA-06-1515 Packaging unit 1 piece Suitable for Carburettors Fuel lines Oil lines Dash 6 / AN6 connections AN10 connections Lines with stainless steel braiding and rubber core Lines with nylon braiding and rubber core Dual feed Motorsport Vehicle tuning Racing Conversion and project vehicles
QSP Carburettor Fuel Line Dual Feed 7/8 AN20 to Dash 6 / AN6 Black
Product description This listing is for a QSP aluminium carburettor fuel line in dual-feed version from 7/8 AN20 to Dash 6 / AN6, in black. QSP aluminium carburettor fuel line in black. The line has Dash 6 / AN6 connections with AN6 / 9/16 UNF thread and an AN10 connection with 7/8 UNF thread. The length between the connections is 241mm / 9.5 inches. The fuel line is suitable for dual-feed Holley / Reman carburettors as well as for fuel and oil applications. Suitable for line systems with nylon or stainless braiding and rubber core. Product details Manufacturer QSP Products Item Carburettor fuel line Material Aluminium Colour black Design straight Version Dual feed Size: 7/8 AN20 to Dash 6 / AN6 Thread: AN6 / 9/16 UNF Thread AN10 / 7/8 UNF Thread type AN / Dash / JIC / UNF Reducer AN - AN Length: 241mm Application Fuel / oil / carburettor Suitable for hose with nylon braiding and rubber core Suitable for hose with stainless steel braiding and rubber core Swivel no Cutter style no Item number QGCA-06-4040 Packaging unit 1 piece Suitable for Carburettors Dual Feed Holley Reman carburettors Fuel lines Oil lines Dash 6 / AN6 connections AN10 connections Lines with nylon braiding and rubber core Lines with stainless steel braiding and rubber core Dual feed Motorsport Vehicle tuning Racing Conversion and project vehicles
QSP Carburettor Fuel Line Single Feed 7/8 AN20 to Dash 8 / AN8 Black
Product description This listing is for a QSP aluminium carburettor fuel line in single-feed version from 7/8 AN20 to Dash 8 / AN8 in black. QSP aluminium carburettor fuel line in black. The line has an AN10 connection with 7/8 UNF thread and a Dash 8 / AN8 connection with AN8 / 3/4-16 UNF thread. The length between the connections is 330mm / 13 inches. The fuel line is suitable for single-feed Holley / Reman carburettors and for fuel and oil applications. The 90° design allows space-saving, tidy installation. Suitable for line systems with nylon or stainless braiding and rubber core. Product details Manufacturer QSP Products Item Carburettor fuel line Material Aluminium Colour black Design 90° Version single feed Size 7/8 AN20 to Dash 8 / AN8 Thread AN10 / 7/8 UNF Thread AN8 / 3/4-16 UNF Thread type AN / Dash / JIC / UNF Reducer AN - AN Length 330mm Application Fuel / oil / carburettor Suitable for hose with nylon braiding and rubber core Suitable for hose with stainless steel braiding and rubber core Swivel no Cutter style no Part number QGCA-06-5050 Packaging unit 1 piece Suitable for Carburettors Single Feed Holley Reman carburettors Fuel lines Oil lines Dash 8 / AN8 connections AN10 connections Lines with nylon braiding and rubber core Lines with stainless steel braiding and rubber core Single feed Motorsport Vehicle tuning Racing Conversion and project vehicles
QSP Carburettor Adapter Short Dual Feed 7/8 AN20 to Dash 8 / AN8 Black
Product description This listing is for a QSP aluminium carburettor adapter in short dual-feed version from 7/8 AN20 to Dash 8 / AN8, in black. QSP aluminium carburettor adapter in black. The adapter has an AN10 connection with 7/8 UNF thread and Dash 8 / AN8 connections with AN8 / 3/4-16 UNF thread. The adapter is suitable for supplying fuel to carburettors as well as for fuel and oil applications. The 90° design allows space-saving and tidy installation. Suitable for line systems with stainless or nylon braiding and rubber core. Product details Manufacturer QSP Products Item: carburettor adapter Material Aluminium Colour black Design 90° Version: short dual feed Size 7/8 AN20 to Dash 8 / AN8 Thread AN10 / 7/8 UNF Thread AN8 / 3/4-16 UNF Thread type AN / Dash / JIC / UNF Reducer AN - AN Application Fuel / oil / carburettor Suitable for hose with stainless steel braiding and rubber core Suitable for hose with nylon braiding and rubber core Packaging unit 1 piece Suitable for Carburettors Fuel lines Oil lines Dash 8 / AN8 connections AN10 connections Lines with stainless steel braiding and rubber core Lines with nylon braiding and rubber core Dual feed Motorsport Vehicle tuning Racing Conversion and project vehicles
QSP Carburettor Adapter Extended Dual Feed 7/8 AN20 to Dash 8 / AN8 Black
Product description This listing is for a QSP aluminium carburettor adapter in extended dual-feed version from 7/8 AN20 to Dash 8 / AN8, in black. QSP aluminium carburettor adapter in black. The adapter has an AN10 connection with 7/8 UNF thread and Dash 8 / AN8 connections with AN8 / 3/4-16 UNF thread. The adapter is suitable for supplying fuel to carburettors as well as for fuel and oil applications. The 90° design allows space-saving and tidy installation. Suitable for line systems with stainless or nylon braiding and rubber core. Product details Manufacturer QSP Products Item: carburettor adapter Material Aluminium Colour black Design 90° Version: extended dual feed Size 7/8 AN20 to Dash 8 / AN8 Thread AN10 / 7/8 UNF Thread AN8 / 3/4-16 UNF Thread type AN / Dash / JIC / UNF Reducer AN - AN Application Fuel / oil / carburettor Suitable for hose with stainless steel braiding and rubber core Suitable for hose with nylon braiding and rubber core Packaging unit 1 piece Suitable for Carburettors Fuel lines Oil lines Dash 8 / AN8 connections AN10 connections Lines with stainless steel braiding and rubber core Lines with nylon braiding and rubber core Dual feed Motorsport Vehicle tuning Racing Conversion and project vehicles
QSP carburettor dual feed fuel line 7/8 AN20 to Dash 8 / AN8 black
Product description This listing is for a QSP aluminium carburettor fuel line in dual-feed version from 7/8 AN20 to Dash 8 / AN8, in black. QSP aluminium carburettor fuel line in black. The line has an AN10 connection with 7/8 UNF thread and Dash 8 / AN8 connections with AN8 / 3/4-16 UNF thread. The length between the connections is 305mm / 9.75 inches. The fuel line is suitable for Dual Feed Holley Ultra XP carburettors as well as for fuel and oil applications. The 90° design allows space-saving and clean installation. Fits line systems with nylon or stainless steel braiding and rubber core. Product details Manufacturer QSP Products Item Carburettor fuel line Material Aluminium Colour black Design 90° Version Dual feed Size 7/8 AN20 to Dash 8 / AN8 Thread AN10 / 7/8 UNF Thread AN8 / 3/4-16 UNF Thread type AN / Dash / JIC / UNF Length 305mm Application Fuel / oil / carburettor Suitable for hose with nylon braiding and rubber core Suitable for hose with stainless steel braiding and rubber core Part number QGCA-08-6060 Packaging unit 1 piece Suitable for Carburettors Dual Feed Holley Ultra XP Fuel lines Oil lines Dash 8 / AN8 connections AN10 connections Lines with nylon braiding and rubber core Lines with stainless steel braiding and rubber core Dual feed Motorsport Vehicle tuning Racing Conversion and project vehicles