Silicone Elbows 180°
QSP Silicone Hose - 180° Elbow - 16mm - Blue
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 19mm - Black
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 32mm - Blue
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Silicone Elbow 180°, 8mm, Black
BOOST products 180° silicone elbow 8mm Top quality in black! High-quality BOOST products silicone hose with fabric plies This BOOST products silicone hose is a charge air hose made of silicone, reinforced with fabric to remain extremely pressure resistant and vacuum resistant. These hoses are suitable for charge air pipes, intakes, water lines and similar. They are pressure resistant up to 5bar and temperature resistant up to 220°C. Not suitable as a petrol or oil line! Inner diameter: 8mm Bend: 180 degrees Leg length: 100mm Wall thickness: 4,3mm Fabric plies: 3 Temperature range: -40°C to 220°C Pressure resistant up to: at least 5bar Colour: black (complete) After extensive testing, we deliver top quality at the best price! In quality tests, our BOOST products silicone hoses have always matched, and several times even exceeded, the quality of the best-known silicone hose manufacturer. Our silicone is very durable and stays flexible, stable and colourfast even after years. Many well-known companies in tuning and motorsport rely on silicone hoses from our range. Put your trust in our quality too! Up to 38mm, BOOST products silicone hoses have 3 fabric plies and 4,3mm wall thickness. From 41mm upwards they have 4 plies with 5,3mm wall thickness. They come with a small, discreet BOOST products logo that seals the quality of the hoses.BOOST products 180° silicone elbow 8mm Top quality in blue! High-quality BOOST products silicone hose with fabric plies This BOOST products silicone hose is a charge air hose made of silicone, reinforced with fabric to remain extremely pressure resistant and vacuum resistant. These hoses are suitable for charge air pipes, intakes, water lines and similar. They are pressure resistant up to 5bar and temperature resistant up to 220°C. Not suitable as a petrol or oil line! Inner diameter: 8mm Bend: 180 degrees Leg length: 100mm Wall thickness: 4,3mm Fabric plies: 3 Temperature range: -40°C to 220°C Pressure resistant up to: at least 5bar Colour: blue (complete) After extensive testing, we deliver top quality at the best price! In quality tests, our BOOST products silicone hoses have always matched, and several times even exceeded, the quality of the best-known silicone hose manufacturer. Our silicone is very durable and stays flexible, stable and colourfast even after years. Many well-known companies in tuning and motorsport rely on silicone hoses from our range. Put your trust in our quality too! Up to 38mm, BOOST products silicone hoses have 3 fabric plies and 4,3mm wall thickness. From 41mm upwards they have 4 plies with 5,3mm wall thickness. They come with a small, discreet BOOST products logo that seals the quality of the hoses. Size chart / silicone elbow 180° ID (mm) Wall thickness (mm) Leg (mm) Centre distance (mm) Burst pressure (bar) Working pressure (bar) Fabric plies 8 4,3 100 45 32,90 10,97 3 104100 45 32,90 10,97 3 13 4,3 100 45 29,30 9,77 3 16 4,3 100 50 25,90 8,63 3 19 4,3 100 50 22,40 7,47 3 22 4,3 100 50 22,40 7,47 3 25 4,3 100 50 20,60 6,87 3 28 4,3 100 56 20,60 6,87 3 30 4,3 100 60 19,00 6,33 3 32 4,3 100 64 19,00 6,33 3 35 4,3 100 70 19,00 6,33 3 38 4,3 100 76 17,20 5,73 3 41 5,3 100 82 17,20 5,73 4 45 5,3 100 90 15,50 5,17 4 48 5,3 100 96 13,80 4,60 4 51 5,3 100 102 13,80 4,60 4 54 5 120 108 12,10 4,03 4 57 5 120 114 12,10 4,03 4 60 5 120 120 12,10 4,03 4 63 5 120 126 10,30 3,43 4 65 5 120 130 10,30 3,43 4 70 5 120 140 8,60 2,87 4 76 5 120 152 6,00 2,00 4 80 5 120 160 5,20 1,73 4 83 5 120 166 5,20 1,73 4 85 5 120 170 5,20 1,73 4 89 5 120 178 5,20 1,73 4 102 5 120 204 3,40 1,13 4 What you should know about silicone - the diameter refers to the inner diameter - add 2x the wall thickness to choose the correct clamp size - silicone hoses can stretch by 1-3mm - if you cannot find the right size, choose the next smaller size What you should know about silicone - the diameter refers to the inner diameter - add 2x the wall thickness to choose the correct clamp size - silicone hoses can stretch by 1-3mm - if you cannot find the right size, choose the next smaller size
Silicone Elbow 180°, 16mm, Black
BOOST products 180° silicone elbow 16mm Top quality in black! High-quality BOOST products silicone hose with fabric plies This BOOST products silicone hose is a charge air hose made of silicone, reinforced with fabric to remain extremely pressure resistant and vacuum resistant. These hoses are suitable for charge air pipes, intakes, water lines and similar. They are pressure resistant up to 5bar and temperature resistant up to 220°C. Not suitable as a petrol or oil line! Inner diameter: 16mm Bend: 180 degrees Leg length: 100mm Wall thickness: 4,3mm Fabric plies: 3 Temperature range: -40°C to 220°C Pressure resistant up to: at least 5bar Colour: black (complete) After extensive testing, we deliver top quality at the best price! In quality tests, our BOOST products silicone hoses have always matched, and several times even exceeded, the quality of the best-known silicone hose manufacturer. Our silicone is very durable and stays flexible, stable and colourfast even after years. Many well-known companies in tuning and motorsport rely on silicone hoses from our range. Put your trust in our quality too! Up to 38mm, BOOST products silicone hoses have 3 fabric plies and 4,3mm wall thickness. From 41mm upwards they have 4 plies with 5,3mm wall thickness. They come with a small, discreet BOOST products logo that seals the quality of the hoses. Size chart / silicone elbow 180° ID (mm) Wall thickness (mm) Leg (mm) Centre distance (mm) Burst pressure (bar) Working pressure (bar) Fabric plies 8 4,3 100 45 32,90 10,97 3 104100 45 32,90 10,97 3 13 4,3 100 45 29,30 9,77 3 16 4,3 100 50 25,90 8,63 3 19 4,3 100 50 22,40 7,47 3 22 4,3 100 50 22,40 7,47 3 25 4,3 100 50 20,60 6,87 3 28 4,3 100 56 20,60 6,87 3 30 4,3 100 60 19,00 6,33 3 32 4,3 100 64 19,00 6,33 3 35 4,3 100 70 19,00 6,33 3 38 4,3 100 76 17,20 5,73 3 41 5,3 100 82 17,20 5,73 4 45 5,3 100 90 15,50 5,17 4 48 5,3 100 96 13,80 4,60 4 51 5,3 100 102 13,80 4,60 4 54 5 120 108 12,10 4,03 4 57 5 120 114 12,10 4,03 4 60 5 120 120 12,10 4,03 4 63 5 120 126 10,30 3,43 4 65 5 120 130 10,30 3,43 4 70 5 120 140 8,60 2,87 4 76 5 120 152 6,00 2,00 4 80 5 120 160 5,20 1,73 4 83 5 120 166 5,20 1,73 4 85 5 120 170 5,20 1,73 4 89 5 120 178 5,20 1,73 4 102 5 120 204 3,40 1,13 4 What you should know about silicone - the diameter refers to the inner diameter - add 2x the wall thickness to choose the correct clamp size - silicone hoses can stretch by 1-3mm - if you cannot find the right size, choose the next smaller size
QSP Silicone Hose - 180° Elbow - 6,5mm - Black
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 6,5mm - Blue
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 8mm - Black
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 8mm - Blue
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 9,5mm - Black
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 9,5mm - Blue
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 102mm - Black
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 102mm - Blue
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 11mm - Black
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 11mm - Blue
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 13mm - Black
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 13mm - Blue
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 16mm - Black
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 19mm - Blue
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 22mm - Black
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 22mm - Blue
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 25mm - Black
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 25mm - Blue
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Hose - 180° Elbow - 28mm - Black
Description 180° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 180° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).