Silicone Couplers
QSP Silicone Coupler - 22mm - Black
Description Straight silicone coupler for Air or coolant applications. The coupler is multiple layers of fabric reinforcement constructed, giving it particularly high strength, pressure stability and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone coupler. The overall length of the straight coupler is 89 mm. Properties Straight version High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications Cooling and charge air systems Automotive and motorsport Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Silicone Blanking Cap 13mm, Black | BOOST products
BOOST products silicone blanking cap, 13mm, blackFabric-reinforced silicone blanking cap in black!High-quality BOOST products silicone blanking cap with 3 fabric pliesBOOST products silicone blanking caps are perfect for sealing open connections, e.g. on engines, blow-off valve / radiator / water connections, breather / drain connections, etc. Also ideal when an engine and/or ancillaries have been removed and are stored for a longer period: sealing open connections on the engine slows down corrosion etc.Unlike other suppliers' caps, Boost products silicone caps are reinforced with multiple fabric inserts, so they can also withstand pressure (air/water). This makes them ideal for use on engines and radiators in automotive applications.The silicone caps are not resistant to oils and fuels!Inner diameter: 13mmLength: 38mmWall thickness: 4,3mmFabric plies: 3Temperature range: -40°C to 220°CPressure resistant up to: at least 5barColour: black (complete)After extensive testing, we deliver top quality at the best price! In quality tests, our BOOST products silicone products have always matched, and several times even exceeded, the quality of the best-known silicone products manufacturer. Our silicone is very durable and stays flexible, stable and colourfast even after years. Many well-known companies in tuning and motorsport rely on silicone products from our range. Put your trust in our quality too!BOOST products silicone caps have 3 fabric plies and 4,3mm wall thickness. They come with a small, discreet BOOST products logo that seals the quality of the hoses.What you should know about silicone- the diameter refers to the inner diameter- add 2x the wall thickness to choose the correct clamp size- silicone products can stretch by 1-3mm- if you cannot find the right size, choose the next smaller size
QSP Silicone Coupler - 48mm - Black
Description Straight silicone coupler for Air or coolant applications. The coupler is multiple layers of fabric reinforcement constructed, giving it particularly high strength, pressure stability and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone coupler. The overall length of the straight coupler is 89 mm. Properties Straight version High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications Cooling and charge air systems Automotive and motorsport Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Coupler - 54mm - Black
Description Straight silicone coupler for Air or coolant applications. The coupler is multiple layers of fabric reinforcement constructed, giving it particularly high strength, pressure stability and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone coupler. The overall length of the straight coupler is 89 mm. Properties Straight version High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications Cooling and charge air systems Automotive and motorsport Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Coupler - Fuel and Oil Resistant - 51mm - Black
Description Silicone adapter coupler for petrol and oil applications with fuel-resistant fluoro inner lining. Thanks to the special inner lining, these adapters are particularly resistant to petrol and oil, which are passed through the coupler. The couplers are ideally suited for the flow of oil and/or fuel. Note: It is not recommended to leave fluids standing in the coupler permanently. The stated dimensions refer to the Inner diameter (ID) of the silicone adapter coupler. Properties Fuel and oil resistant thanks to fluoro inner lining High-quality silicone material High stability and long service life Temperature and pressure resistant Suitable for oil and petrol lines Inner diameter as selected Applications Fuel and oil lines Automotive and motorsport Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Silicone Elbow 90°, 13mm, Black
90° silicone elbow 13mm Top quality in black! High-quality BOOST products silicone hose with fabric plies This BOOST products silicone hose is a charge air hose made of silicone, reinforced with fabric to remain extremely pressure resistant and vacuum resistant. These hoses are suitable for charge air pipes, intakes, water lines and similar. They are pressure resistant up to 5bar and temperature resistant up to 220°C. Not suitable as a petrol or oil line! Inner diameter: 13mm Bend: 90 degrees Leg length: 100mm Wall thickness: 4,3mm Fabric plies: 3 Temperature range: -40°C to 220°C Pressure resistant up to: at least 5bar Colour: black (complete) After extensive testing, we deliver top quality at the best price! In quality tests, our BOOST products silicone hoses have always matched, and several times even exceeded, the quality of the best-known silicone hose manufacturer. Our silicone is very durable and stays flexible, stable and colourfast even after years. Many well-known companies in tuning and motorsport rely on silicone hoses from our range. Put your trust in our quality too! Up to 38mm, BOOST products silicone hoses have 3 fabric plies and 4,3mm wall thickness. From 41mm upwards they have 4 plies with 5,3mm wall thickness. They come with a small, discreet BOOST products logo that seals the quality of the hoses. What you should know about silicone - the diameter refers to the inner diameter - add 2x the wall thickness to choose the correct clamp size - silicone hoses can stretch by 1-3mm - if you cannot find the right size, choose the next smaller size
Silicone Coupler Hose 81mm x 139mm in Red Used
Used silicone connector 81mm x 139mm in red - the diameter refers to the inner diameter- add 2x the wall thickness to choose the correct clamp size- silicone hoses can stretch by 1-3mm
Silicone Coupler Hose 81mm x 41mm in Red Used
Used silicone connector 81mm x 41mm in red - the diameter refers to the inner diameter- add 2x the wall thickness to choose the correct clamp size- silicone hoses can stretch by 1-3mm
Black Silicone Elbow 90°, 35mm
90° silicone elbow 35mm Top quality in black! High-quality BOOST products silicone hose with fabric plies This BOOST products silicone hose is a charge air hose made of silicone, reinforced with fabric to remain extremely pressure resistant and vacuum resistant. These hoses are suitable for charge air pipes, intakes, water lines and similar. They are pressure resistant up to 5bar and temperature resistant up to 220°C. Not suitable as a petrol or oil line! Inner diameter: 35mm Bend: 90 degrees Leg length: 100mm Wall thickness: 4,3mm Fabric plies: 3 Temperature range: -40°C to 220°C Pressure resistant up to: at least 5bar Colour: black (complete) After extensive testing, we deliver top quality at the best price! In quality tests, our BOOST products silicone hoses have always matched, and several times even exceeded, the quality of the best-known silicone hose manufacturer. Our silicone is very durable and stays flexible, stable and colourfast even after years. Many well-known companies in tuning and motorsport rely on silicone hoses from our range. Put your trust in our quality too! Up to 38mm, BOOST products silicone hoses have 3 fabric plies and 4,3mm wall thickness. From 41mm upwards they have 4 plies with 5,3mm wall thickness. They come with a small, discreet BOOST products logo that seals the quality of the hoses. What you should know about silicone - the diameter refers to the inner diameter - add 2x the wall thickness to choose the correct clamp size - silicone hoses can stretch by 1-3mm - if you cannot find the right size, choose the next smaller size
Silicone Reducer Elbow 90°, 80 - 70mm, Blue
High-quality BOOST products silicone hose with fabric plies This BOOST products silicone hose is a charge air hose made of silicone, reinforced with fabric to remain extremely pressure resistant and vacuum resistant. These hoses are suitable for charge air pipes, intakes, water lines and similar. They are pressure resistant up to 5bar and temperature resistant up to 220°C. Not suitable as a petrol or oil line!For the first time, we are offering hose reducers with a 90° bend.Inner diameter: 80mm and 70mmBend: 90°Leg length: 120mmWall thickness: 5,3mmFabric plies: 4Temperature range: -40°C to 220°CPressure resistant up to: at least 5barColour: blue (complete)
Silicone Joiner / Hose 63mm x 67mm – Black – Used
Silicone coupler / hose 63mm x 67mm – black – used Used silicone coupler in black. Ideal for charge air pipework, intake systems or other boost/vacuum applications. Technical data Inner diameter: 63 mm Length: 67 mm Colour: Black Condition: used Notes The stated diameter refers to the inner diameter. To choose the right clamps, please + 2× wall thickness into account. Silicone hoses can stretch by 1–3 mm.
QSP Silicone Coupler - 19mm - Black
Description Straight silicone coupler for Air or coolant applications. The coupler is multiple layers of fabric reinforcement constructed, giving it particularly high strength, pressure stability and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone coupler. The overall length of the straight coupler is 89 mm. Properties Straight version High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications Cooling and charge air systems Automotive and motorsport Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Coupler - 19mm - Blue
Description Straight silicone coupler for Air or coolant applications. The coupler is multiple layers of fabric reinforcement constructed, giving it particularly high strength, pressure stability and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone coupler. The overall length of the straight coupler is 89 mm. Properties Straight version High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications Cooling and charge air systems Automotive and motorsport Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Coupler - 22mm - Blue
Description Straight silicone coupler for Air or coolant applications. The coupler is multiple layers of fabric reinforcement constructed, giving it particularly high strength, pressure stability and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone coupler. The overall length of the straight coupler is 89 mm. Properties Straight version High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications Cooling and charge air systems Automotive and motorsport Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Coupler - 25mm - Black
Description Straight silicone coupler for Air or coolant applications. The coupler is multiple layers of fabric reinforcement constructed, giving it particularly high strength, pressure stability and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone coupler. The overall length of the straight coupler is 89 mm. Properties Straight version High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications Cooling and charge air systems Automotive and motorsport Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Coupler - 25mm - Blue
Description Straight silicone coupler for Air or coolant applications. The coupler is multiple layers of fabric reinforcement constructed, giving it particularly high strength, pressure stability and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone coupler. The overall length of the straight coupler is 89 mm. Properties Straight version High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications Cooling and charge air systems Automotive and motorsport Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Coupler - 28mm - Black
Description Straight silicone coupler for Air or coolant applications. The coupler is multiple layers of fabric reinforcement constructed, giving it particularly high strength, pressure stability and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone coupler. The overall length of the straight coupler is 89 mm. Properties Straight version High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications Cooling and charge air systems Automotive and motorsport Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Coupler - 28mm - Blue
Description Straight silicone coupler for Air or coolant applications. The coupler is multiple layers of fabric reinforcement constructed, giving it particularly high strength, pressure stability and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone coupler. The overall length of the straight coupler is 89 mm. Properties Straight version High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications Cooling and charge air systems Automotive and motorsport Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Coupler - 30mm - Black
Description Straight silicone coupler for Air or coolant applications. The coupler is multiple layers of fabric reinforcement constructed, giving it particularly high strength, pressure stability and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone coupler. The overall length of the straight coupler is 89 mm. Properties Straight version High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications Cooling and charge air systems Automotive and motorsport Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Coupler - 30mm - Blue
Description Straight silicone coupler for Air or coolant applications. The coupler is multiple layers of fabric reinforcement constructed, giving it particularly high strength, pressure stability and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone coupler. The overall length of the straight coupler is 89 mm. Properties Straight version High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications Cooling and charge air systems Automotive and motorsport Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Coupler - 32mm - Black
Description Straight silicone coupler for Air or coolant applications. The coupler is multiple layers of fabric reinforcement constructed, giving it particularly high strength, pressure stability and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone coupler. The overall length of the straight coupler is 89 mm. Properties Straight version High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications Cooling and charge air systems Automotive and motorsport Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Coupler - 32mm - Blue
Description Straight silicone coupler for Air or coolant applications. The coupler is multiple layers of fabric reinforcement constructed, giving it particularly high strength, pressure stability and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone coupler. The overall length of the straight coupler is 89 mm. Properties Straight version High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications Cooling and charge air systems Automotive and motorsport Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
QSP Silicone Coupler - 35mm - Blue
Description Straight silicone coupler for Air or coolant applications. The coupler is multiple layers of fabric reinforcement constructed, giving it particularly high strength, pressure stability and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone coupler. The overall length of the straight coupler is 89 mm. Properties Straight version High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications Cooling and charge air systems Automotive and motorsport Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).