QSP Fuel / Oil Hose Nylon Braided AN20 Dash 20 (28,5mm) - p/m1
€98.77
Available, delivery time: 3 - 4 days
Product information "QSP Fuel / Oil Hose Nylon Braided AN20 Dash 20 (28,5mm) - p/m1"
Reinforced fuel/oil hose made from synthetic rubber with stainless steel core & nylon braid – AN4 to AN20 – price per metre
This high-quality, reinforced fuel and oil hose was specially developed for applications where high performance, reliability and low weight are crucial. Ideally suited for motorsport, vehicle building, industry and many other technical applications.
The hose features a flexible stainless steel inner core, which is embedded in a synthetic chlorinated polyethylene inner layer . This achieves particularly high stability and pressure resistance. The braided nylon outer sheath additionally protects against abrasion, wear and external influences while also providing weight reduction in the vehicle.
Thanks to its special construction, this hose is compatible with various fitting types. Both connections with cutting ring (cutting edge) and connections without cutting ring can be used.
Product features:
Reinforced high-performance hose for fuel and oil
Flexible stainless steel inner core for maximum stability
Synthetic inner lining (CPE) for high resistance
Braided nylon outer sheath for protection against abrasion and wear
Reduced weight compared with conventional steel-braided hoses
High flexibility and long service life
Suitable for the following media:
Coolant
Oil
Air
Methanol
Lubricants
E85 fuel
Vacuum applications
Technical data:
Minimum bend radius: 63,5 mm (2,5")
Sizes:
Available immediately: AN4 – AN20
Pricing:
The stated price applies per metre.
Example: if you would like to order 3 metres please enter quantity 3 .
Applications:
Industry
Motorsport & racing
Vehicle tuning
Rally & off-road
Cars / trucks
Motorcycle
Agriculture & horticulture
Diesel and petrol engines
Turbo engines
| Brand: | QSP |
|---|---|
| Colour: | Black |
| Connection: | 1 5/8-12 UNF, Dash 20 |
| Hose Type: | Nylon Braided, Rubber Core Hose |
Manufacturer:
Matching fittings (Dash 20)
BOOST products Quick Click male weld-on fitting to -20 AN - aluminium Aluminium quick-release weld-on adapter -AN20 / Dash 20 male High-quality AN / Dash quick disconnect fitting / adapter - releasable without tools - for E85 fuel as well as oil and pneumatic systems Connection: Dash 20 / -20 AN male Quick Click (fit / remove without tools)Version: Weld-on fittingMaterial: Aluminium Quick Click fittings are hydraulic quick-release couplings that allow tool-free connection and release. To make a connection, you always need a male (pin) and a female (Quick Click socket) to make a connection (coupling). Always check the size details before ordering. For example, a Quick Click male Dash 6 adapter/fitting is not compatible with a female Quick Click Dash 10 socket. Ideal for motorsport and tuning applications where speed, reliability and ease of maintenance are crucial. Quick-connect system for fast, tool-free installation and removal Compatible with our BOOST products Quick Click fitting systems Full-flow design for maximum performance Suitable for fuel, oil, E85 and methanol High pressure and temperature resistance Lightweight, corrosion-resistant aluminium construction BOOST products Click Quick fittings combine race-proven reliability with a high-speed quick-connect mechanism, developed for professional motorsport and performance applications. The hose end versions are compatible with BOOST products PTFE and NBR/CPE rubber hoses and provide an instant, leak-free seal, and can be connected or released in seconds without tools. The innovative quick-release design ensures a secure hold and makes quick maintenance easy. Ideal for fuel, oil and cooling systems, where speed and precision are crucial. Made from lightweight anodised aluminium, these fittings offer excellent resistance to fuel, oil, E85, methanol and other common vehicle fluids. Available in various versions such as ORB, screw-on, high-flow, etc., these connections combine maximum flow with tool-free connection, giving you a decisive advantage on the track. BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines. The fittings and adapters are CNC-machined from 6061-T6 aluminium and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique connection systems, the lines are leak-tight without crimping tools and pressure resistant up to at least 35 bar. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 AN for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
Straight aluminium hose fitting without cutting ring. This fitting is intended for use with stainless-steel-braided or nylon-braided rubber hoses and, when correctly fitted, provides a secure, leak-tight connection. Fitting is simple and the design gives a clean look. Product features: Straight design without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
Straight aluminium hose fitting without cutting ring. This fitting is intended for use with stainless-steel- or nylon-braided rubber hoses and, when correctly fitted, provides a secure, leak-tight connection. Fitting is simple and gives a clean look. Product features: Straight design without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
Straight aluminium hose fitting with cutting ring. This fitting is intended for use with stainless-steel- or nylon-braided rubber hoses and, when correctly fitted, provides a secure, leak-tight connection. The integrated cutting ring ensures the hose sits firmly in the fitting. Installation is simple and the design gives a clean look. Product features: Straight design with cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN6 to AN16 available Robust design Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
45° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel braided or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed. The 45° design allows slightly angled line routing in tight installation spaces. Fitting is simple and the design gives a clean look. Product features: 45° version without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
90° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed. The 90° design allows space-saving line routing in tight installation spaces. Fitting is simple and gives a clean look. Product features: 90° version without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
45° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed. The 45° design allows slightly angled line routing in tight installation spaces. Fitting is simple and gives a clean look. Product features: 45° version without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
90° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed. The 90° design allows space-saving line routing in tight installation spaces. Fitting is simple and gives a clean look. Product features: 90° version without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
120° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel braided or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed. The 120° design allows angled line routing in suitable installation situations. Fitting is simple and the design gives a clean look. Product features: 120° version without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
150° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel braided or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed. The 150° design allows angled line routing in special installation situations. Fitting is simple and the design gives a clean look. Product features: 150° version without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
180° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel braided or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed. The 180° design allows the line to be routed straight back in special installation situations. Fitting is simple and the design gives a clean look. Product features: 180° version without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
120° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed. The 120° design allows angled line routing in suitable installation situations. Fitting is simple and gives a clean look. Product features: 120° version without cutting ring Suitable for rubber hoses with stainless steel or nylon braiding Sizes AN4 to AN20 available Colours: blue/red and black Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
Matching adapters (Dash 20)
Product description This listing is for a QSP aluminium carburettor adapter in short dual-feed version from 7/8 AN20 to Dash 6 / AN6 in black. QSP aluminium carburettor adapter in black. The adapter has an AN10 connection with 7/8 UNF thread and Dash 6 / AN6 connections with AN6 / 9/16 UNF thread. The adapter is suitable for supplying fuel to carburettors and for fuel and oil applications. Suitable for line systems with stainless or nylon braiding and rubber core. Product details Manufacturer QSP Products Item: carburettor adapter Material Aluminium Colour black Design straight Version: short dual feed Size: 7/8 AN20 to Dash 6 / AN6 Thread AN10 / 7/8 UNF Thread: AN6 / 9/16 UNF Thread type AN / Dash / JIC / UNF Reducer AN - AN Application Fuel / oil / carburettor Suitable for hose with stainless steel braiding and rubber core Suitable for hose with nylon braiding and rubber core Swivel no Cutter style no Part number QGCA-06-1010 Packaging unit 1 piece Suitable for Carburettors Fuel lines Oil lines Dash 6 / AN6 connections AN10 connections Lines with stainless steel braiding and rubber core Lines with nylon braiding and rubber core Dual feed Motorsport Vehicle tuning Racing Conversion and project vehicles
Product description This listing is for a QSP aluminium carburettor adapter in short dual-feed version from 7/8 AN20 to Dash 8 / AN8, in black. QSP aluminium carburettor adapter in black. The adapter has an AN10 connection with 7/8 UNF thread and Dash 8 / AN8 connections with AN8 / 3/4-16 UNF thread. The adapter is suitable for supplying fuel to carburettors as well as for fuel and oil applications. The 90° design allows space-saving and tidy installation. Suitable for line systems with stainless or nylon braiding and rubber core. Product details Manufacturer QSP Products Item: carburettor adapter Material Aluminium Colour black Design 90° Version: short dual feed Size 7/8 AN20 to Dash 8 / AN8 Thread AN10 / 7/8 UNF Thread AN8 / 3/4-16 UNF Thread type AN / Dash / JIC / UNF Reducer AN - AN Application Fuel / oil / carburettor Suitable for hose with stainless steel braiding and rubber core Suitable for hose with nylon braiding and rubber core Packaging unit 1 piece Suitable for Carburettors Fuel lines Oil lines Dash 8 / AN8 connections AN10 connections Lines with stainless steel braiding and rubber core Lines with nylon braiding and rubber core Dual feed Motorsport Vehicle tuning Racing Conversion and project vehicles
Product description This listing is for a QSP aluminium carburettor adapter in extended dual-feed version from 7/8 AN20 to Dash 6 / AN6, in black. QSP aluminium carburettor adapter in black. The adapter has an AN10 connection with 7/8 UNF thread and Dash 6 / AN6 connections with AN6 / 9/16 UNF thread. The adapter is suitable for supplying fuel to carburettors as well as for fuel and oil applications. The 90° design allows space-saving and tidy installation. Suitable for line systems with stainless or nylon braiding and rubber core. Product details Manufacturer QSP Products Item: carburettor adapter Material Aluminium Colour black Design 90° Version: extended dual feed Size: 7/8 AN20 to Dash 6 / AN6 Thread AN10 / 7/8 UNF Thread: AN6 / 9/16 UNF Thread type AN / Dash / JIC / UNF Reducer AN - AN Application Fuel / oil / carburettor Suitable for hose with stainless steel braiding and rubber core Suitable for hose with nylon braiding and rubber core Swivel no Cutter style no Item number QGCA-06-1515 Packaging unit 1 piece Suitable for Carburettors Fuel lines Oil lines Dash 6 / AN6 connections AN10 connections Lines with stainless steel braiding and rubber core Lines with nylon braiding and rubber core Dual feed Motorsport Vehicle tuning Racing Conversion and project vehicles
DASH 20 female to female connector in black Reusable aluminium hose end with UNF thread (Dash system) and 360° swivel. This allows you to make up your own lines to suit individual needs and numerous applications (oil, water, fuel, brake and clutch systems) and install them stress-free. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our braided lines can be used (alternatively, lines from other manufacturers with the same dimensions). The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5,56mm / outer diameter 11,13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8,73mm / outer diameter 13,89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11,12mm / outer diameter 16,28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14,27mm / outer diameter 20,24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17,47mm / outer diameter 23,82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22,20mm / outer diameter 30,50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28,50mm / outer diameter 35,81mm
Product description This listing is for a QSP aluminium carburettor adapter in extended dual-feed version from 7/8 AN20 to Dash 8 / AN8, in black. QSP aluminium carburettor adapter in black. The adapter has an AN10 connection with 7/8 UNF thread and Dash 8 / AN8 connections with AN8 / 3/4-16 UNF thread. The adapter is suitable for supplying fuel to carburettors as well as for fuel and oil applications. The 90° design allows space-saving and tidy installation. Suitable for line systems with stainless or nylon braiding and rubber core. Product details Manufacturer QSP Products Item: carburettor adapter Material Aluminium Colour black Design 90° Version: extended dual feed Size 7/8 AN20 to Dash 8 / AN8 Thread AN10 / 7/8 UNF Thread AN8 / 3/4-16 UNF Thread type AN / Dash / JIC / UNF Reducer AN - AN Application Fuel / oil / carburettor Suitable for hose with stainless steel braiding and rubber core Suitable for hose with nylon braiding and rubber core Packaging unit 1 piece Suitable for Carburettors Fuel lines Oil lines Dash 8 / AN8 connections AN10 connections Lines with stainless steel braiding and rubber core Lines with nylon braiding and rubber core Dual feed Motorsport Vehicle tuning Racing Conversion and project vehicles
Similar products
BOOST products hydraulic hose Dash 10 - 1,8m - black nylon Premium hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 1,82m Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -10 AN / Dash 10 / 15,9mm Inner diameter: 14,29 mm Outer diameter: 20,38 mm Working pressure (max.): 34 bar Burst pressure: 138 bar Vacuum (max.): 0,68 bar Weight: 0,293 kg/m Bend radius (min.): 101,6 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
BOOST products hydraulic hose Dash 10 - 3m - black nylon Premium hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 3m Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -10 AN / Dash 10 / 15,9mm Inner diameter: 14,29 mm Outer diameter: 20,38 mm Working pressure (max.): 34 bar Burst pressure: 138 bar Vacuum (max.): 0,68 bar Weight: 0,293 kg/m Bend radius (min.): 101,6 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
BOOST products hydraulic hose Dash 10 - 6m - black nylon Premium hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 6m Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -10 AN / Dash 10 / 15,9mm Inner diameter: 14,29 mm Outer diameter: 20,38 mm Working pressure (max.): 34 bar Burst pressure: 138 bar Vacuum (max.): 0,68 bar Weight: 0,293 kg/m Bend radius (min.): 101,6 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
BOOST products hydraulic hose Dash 10 - 90cm - black nylon Premium hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -10 AN / Dash 10 / 15,9mm Inner diameter: 14,29 mm Outer diameter: 20,38 mm Working pressure (max.): 34 bar Burst pressure: 138 bar Vacuum (max.): 0,68 bar Weight: 0,293 kg/m Bend radius (min.): 101,6 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
BOOST products hydraulic hose Dash 12 - 3m - black nylon Premium hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -12 AN / Dash 12 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 3m Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -12 AN / Dash 12 / 11/16x12 / 19,1mm Inner diameter: 17,46 mm Outer diameter: 24,38 mm Working pressure (max.): 24 bar Burst pressure: 97 bar Vacuum (max.): 0,68 bar Weight: 0,372 kg/m Bend radius (min.): 114,3 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
BOOST products hydraulic hose Dash 12 - 90cm - black nylon Premium hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -12 AN / Dash 12 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -12 AN / Dash 12 / 11/16x12 / 19,1mm Inner diameter: 17,46 mm Outer diameter: 24,38 mm Working pressure (max.): 24 bar Burst pressure: 97 bar Vacuum (max.): 0,68 bar Weight: 0,372 kg/m Bend radius (min.): 114,3 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
BOOST products hydraulic hose Dash 4 - 1.8m - black nylon Premium hydraulic hose with black nylon braiding, for E85 fuel as well as oil and pneumatic systems Flexible -04 AN / Dash 4 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 1,82m Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products fittings with thread size: -04 AN / Dash 4 / 7/16x20" Inner diameter: 5.56 mm Outer diameter: 11.17 mm Maximum working pressure: 34 bar Burst pressure: 138 bar Vacuum (max.): 0.68 bar Weight: 0.109 kg/m Bend radius (min.): 50.8 mm Temperature (min.) -40°C Temperature (max.) 125°C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.
BOOST products hydraulic hose Dash 4 - 3m - black nylon Premium hydraulic hose with black nylon braiding, for E85 fuel as well as oil and pneumatic systems Flexible -04 AN / Dash 4 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 3m Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products fittings with thread size: -04 AN / Dash 4 / 7/16x20" Inner diameter: 5.56 mm Outer diameter: 11.17 mm Maximum working pressure: 34 bar Burst pressure: 138 bar Vacuum (max.): 0.68 bar Weight: 0.109 kg/m Bend radius (min.): 50.8 mm Temperature (min.) -40°C Temperature (max.) 125°C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.
BOOST products hydraulic hose Dash 4 - 6m - black nylon Premium hydraulic hose with black nylon braiding, for E85 fuel as well as oil and pneumatic systems Flexible -04 AN / Dash 4 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 6m Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products fittings with thread size: -04 AN / Dash 4 / 7/16x20" Inner diameter: 5.56 mm Outer diameter: 11.17 mm Maximum working pressure: 34 bar Burst pressure: 138 bar Vacuum (max.): 0.68 bar Weight: 0.109 kg/m Bend radius (min.): 50.8 mm Temperature (min.) -40°C Temperature (max.) 125°C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.
BOOST products Hydraulic Hose Dash 4 - 90cm - Black Nylon Premium hydraulic hose with black nylon braiding, for E85 fuel as well as oil and pneumatic systems Flexible -04 AN / Dash 4 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products fittings with thread size: -04 AN / Dash 4 / 7/16x20" Inner diameter: 5.56 mm Outer diameter: 11.17 mm Maximum working pressure: 34 bar Burst pressure: 138 bar Vacuum (max.): 0.68 bar Weight: 0.109 kg/m Bend radius (min.): 50.8 mm Temperature (min.) -40°C Temperature (max.) 125°C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.
BOOST products hydraulic hose Dash 6 - 1.8m - black nylon Premium hydraulic hose with black nylon braiding, for E85 fuel as well as oil and pneumatic systems Flexible -06 AN / Dash 6 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 1,82m Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products fittings with thread size: -06 AN / Dash 6 / 9.5mm Inner diameter: 8.73 mm Outer diameter: 14.22 mm Working pressure (max.): 34 bar Burst pressure: 138 bar Vacuum (max.): 0.68 bar Weight: 0.132 kg/m Bend radius (min.): 63.5 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.
BOOST products hydraulic hose Dash 6 - 3m - black nylon Premium hydraulic hose with black nylon braiding, for E85 fuel as well as oil and pneumatic systems Flexible -06 AN / Dash 6 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 3m Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products fittings with thread size: -06 AN / Dash 6 / 9.5mm Inner diameter: 8.73 mm Outer diameter: 14.22 mm Working pressure (max.): 34 bar Burst pressure: 138 bar Vacuum (max.): 0.68 bar Weight: 0.132 kg/m Bend radius (min.): 63.5 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.