QSP Silicone Hose XL - 90° Elbow - 35mm - Blue
€38.68
Available, delivery time: 3 - 4 days
Product information "QSP Silicone Hose XL - 90° Elbow - 35mm - Blue"
Description
Technical data
Material & construction
-
Material: silicone VMQ (vinyl methyl)
-
Fabric reinforcement: polyester
-
Wall thickness: approx. 4–5 mm
-
Number of plies: at least 3 plies
(larger diameters with 4 or more plies)
Temperature range
-
Operating temperature: -60 °C to +180 °C
Mechanical properties
-
Hardness: 65–75 Shore A
-
Tensile strength: at least 6,0 MPa (N/mm²)
-
Elongation at break: at least 200 %
-
Compression set: max. 40 % (70 h at 150 °C)
Pressure ratings (depending on inner diameter)
| Inner diameter | Working pressure | Burst pressure |
|---|---|---|
| 6 – 10 mm | 10 bar | 18 bar |
| 11 – 18 mm | 7 bar | 15,5 bar |
| 19 – 28 mm | 6 bar | 11,5 bar |
| 29 – 35 mm | 4 bar | 8,9 bar |
| 36 – 44 mm | 3 bar | 7,4 bar |
| 45 – 55 mm | 2 bar | 6,1 bar |
| 56 – 65 mm | 1,5 bar | 5 bar |
| 66 – 80 mm | 1,5 bar | 4 bar |
| 81 – 90 mm | 1 bar | 2,9 bar |
| 91 – 102 mm | 1 bar | 2 bar |
Properties
-
Resistant to ageing and moisture
-
Very good weather resistance
-
UV and ozone resistant
-
Free from harmful substances
-
Good electrical insulation
-
Permanently elastic
Chemical resistance
Resistant to:
-
Dilute acids and alkalis
-
Hot and cold water
-
Hot air
-
Ozone
-
UV radiation
Limited suitability for:
-
Oils, lubricants and greases
-
OAT coolants (organic acids)
-
Organic acid based coolants
Notes on working and burst pressure
-
Working pressure: Pressure at which the hose is used in normal operation
-
Burst pressure: Maximum pressure at which the material fails
(depending on wall thickness and tensile strength)
Cutting & processing
-
The hose can be easily cut to the desired length
-
Recommendation: place a hose clamp at the cutting point and cut with a sharp knife
Dimensions & notes
-
All dimensions in millimetres (mm)
-
Stated hose diameters = Inner diameter (ID)
-
Aluminium pipes = Outer diameter (OD)
Example:
A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
| Brand: | QSP |
|---|---|
| Colour: | Blue |
| Condition: | New |
| Features: | XL Elbow |
| Inner Diameter (mm): | 35mm |
| Material: | Silicone |
| Shape: | 90° Elbow |
Manufacturer:
Matching clamps
HD HOSE CLAMP, BLACK, 8-14MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 10mmSize: 8mm to 14mmPlease note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 11-17MM Strongest clamp of this type With black metal head Width: 10 mmSize: 11mm to 17mm Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 11,7mmSize: 11mm to 17mmPlease note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 13-20MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 11,7mmSize: 13mm to 20mmPlease note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 22-32MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 12mmSize: 22mm to 32mm Please note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 15-24MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 12mmSize: 15mm to 24mm Please note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 19-28MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 12mmSize: 19mm to 28mm Please note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 26-38MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 12mmSize: 26mm to 38mm Please note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 32-44MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 12mmSize: 32mm to 44mm Please note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
Similar products
Description 90° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 90° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
BOOST products silicone Cobra-style elbow 2.5" / 63,5mm - 90° High-quality 90 degree cobra head style silicone elbow in black Designed for tight 90 degree bends with minimal flow restriction The Cobra-head-style silicone elbow is ideal for applications requiring a compact 90-degree turn without compromising airflow. Mainly used in situations with low clearance, these silicone elbows are a popular choice for our intake manifolds, especially when the throttle body is on the passenger side. The Cobra-style silicone elbows can be used effectively on both the pressure and intake side of your turbo system. This BOOST products silicone hose is made from fabric-reinforced silicone so that it remains extremely pressure-resistant and also vacuum-resistant. These hoses are suitable for charge air pipes, intakes, coolant lines and similar. They are pressure-resistant up to 5bar and temperature-resistant up to 220°C. Not suitable as a fuel or oil line! Inner diameter: 2,5" / 63,5mm Overall length: approx. 205mm Maximum width: 109mm Maximum depth: approx. 102mm Wall thickness: 5,3mm Fabric plies: 4 Temperature range: -40°C to 220°C Pressure-resistant up to: at least 5 bar Colour: black (full) After extensive testing, we deliver top quality at the best price! In quality tests, our BOOST products silicone hoses have always matched, and several times even exceeded, the quality of the best-known silicone hose manufacturer. Our silicone is very durable and stays flexible, stable and colourfast even after years. Many well-known companies in tuning and motorsport rely on silicone hoses from our range. Put your trust in our quality too! Up to 38mm, BOOST products silicone hoses have 3 fabric plies and 4,3mm wall thickness. From 41mm upwards they have 4 plies with 5,3mm wall thickness. They come with a small, discreet BOOST products logo that seals the quality of the hoses. What you should know about silicone - the diameter refers to the inner diameter - add 2x the wall thickness to choose the correct clamp size - silicone hoses can stretch by 1-3mm - if you cannot find the right size, choose the next smaller size
BOOST products silicone Cobra-style elbow 2.5" / 63,5mm - 90° High-quality 90 degree cobra head style silicone elbow in blue Designed for tight 90 degree bends with minimal flow restriction The Cobra-head-style silicone elbow is ideal for applications requiring a compact 90-degree turn without compromising airflow. Mainly used in situations with low clearance, these silicone elbows are a popular choice for our intake manifolds, especially when the throttle body is on the passenger side. The Cobra-style silicone elbows can be used effectively on both the pressure and intake side of your turbo system. This BOOST products silicone hose is made from fabric-reinforced silicone so that it remains extremely pressure-resistant and also vacuum-resistant. These hoses are suitable for charge air pipes, intakes, coolant lines and similar. They are pressure-resistant up to 5bar and temperature-resistant up to 220°C. Not suitable as a fuel or oil line! Inner diameter: 2,5" / 63,5mm Overall length: approx. 205mm Maximum width: 109mm Maximum depth: approx. 102mm Wall thickness: 5,3mm Fabric plies: 4 Temperature range: -40°C to 220°C Pressure-resistant up to: at least 5 bar Colour: blue (full) After extensive testing, we deliver top quality at the best price! In quality tests, our BOOST products silicone hoses have always matched, and several times even exceeded, the quality of the best-known silicone hose manufacturer. Our silicone is very durable and stays flexible, stable and colourfast even after years. Many well-known companies in tuning and motorsport rely on silicone hoses from our range. Put your trust in our quality too! Up to 38mm, BOOST products silicone hoses have 3 fabric plies and 4,3mm wall thickness. From 41mm upwards they have 4 plies with 5,3mm wall thickness. They come with a small, discreet BOOST products logo that seals the quality of the hoses. What you should know about silicone - the diameter refers to the inner diameter - add 2x the wall thickness to choose the correct clamp size - silicone hoses can stretch by 1-3mm - if you cannot find the right size, choose the next smaller size
BOOST products silicone Cobra-style elbow 3.0" / 76mm - 90° High-quality 90 degree cobra head style silicone elbow in black Designed for tight 90 degree bends with minimal flow restriction The Cobra-head-style silicone elbow is ideal for applications requiring a compact 90-degree turn without compromising airflow. Mainly used in situations with low clearance, these silicone elbows are a popular choice for our intake manifolds, especially when the throttle body is on the passenger side. The Cobra-style silicone elbows can be used effectively on both the pressure and intake side of your turbo system. This BOOST products silicone hose is made from fabric-reinforced silicone so that it remains extremely pressure-resistant and also vacuum-resistant. These hoses are suitable for charge air pipes, intakes, coolant lines and similar. They are pressure-resistant up to 5bar and temperature-resistant up to 220°C. Not suitable as a fuel or oil line! Inner diameter: 3.0" / 76mm Overall length: approx. 246mm Maximum width: 128mm Maximum depth: approx. 104mm Wall thickness: 5,3mm Fabric plies: 4 Temperature range: -40°C to 220°C Pressure-resistant up to: at least 5 bar Colour: black (full) After extensive testing, we deliver top quality at the best price! In quality tests, our BOOST products silicone hoses have always matched, and several times even exceeded, the quality of the best-known silicone hose manufacturer. Our silicone is very durable and stays flexible, stable and colourfast even after years. Many well-known companies in tuning and motorsport rely on silicone hoses from our range. Put your trust in our quality too! Up to 38mm, BOOST products silicone hoses have 3 fabric plies and 4,3mm wall thickness. From 41mm upwards they have 4 plies with 5,3mm wall thickness. They come with a small, discreet BOOST products logo that seals the quality of the hoses. What you should know about silicone - the diameter refers to the inner diameter - add 2x the wall thickness to choose the correct clamp size - silicone hoses can stretch by 1-3mm - if you cannot find the right size, choose the next smaller size
BOOST products silicone Cobra-style elbow 3.0" / 76mm - 90° High-quality 90 degree cobra head style silicone elbow in blue Designed for tight 90 degree bends with minimal flow restriction The Cobra-head-style silicone elbow is ideal for applications requiring a compact 90-degree turn without compromising airflow. Mainly used in situations with low clearance, these silicone elbows are a popular choice for our intake manifolds, especially when the throttle body is on the passenger side. The Cobra-style silicone elbows can be used effectively on both the pressure and intake side of your turbo system. This BOOST products silicone hose is made from fabric-reinforced silicone so that it remains extremely pressure-resistant and also vacuum-resistant. These hoses are suitable for charge air pipes, intakes, coolant lines and similar. They are pressure-resistant up to 5bar and temperature-resistant up to 220°C. Not suitable as a fuel or oil line! Inner diameter: 3.0" / 76mm Overall length: approx. 246mm Maximum width: 128mm Maximum depth: approx. 104mm Wall thickness: 5,3mm Fabric plies: 4 Temperature range: -40°C to 220°C Pressure-resistant up to: at least 5 bar Colour: blue (full) After extensive testing, we deliver top quality at the best price! In quality tests, our BOOST products silicone hoses have always matched, and several times even exceeded, the quality of the best-known silicone hose manufacturer. Our silicone is very durable and stays flexible, stable and colourfast even after years. Many well-known companies in tuning and motorsport rely on silicone hoses from our range. Put your trust in our quality too! Up to 38mm, BOOST products silicone hoses have 3 fabric plies and 4,3mm wall thickness. From 41mm upwards they have 4 plies with 5,3mm wall thickness. They come with a small, discreet BOOST products logo that seals the quality of the hoses. What you should know about silicone - the diameter refers to the inner diameter - add 2x the wall thickness to choose the correct clamp size - silicone hoses can stretch by 1-3mm - if you cannot find the right size, choose the next smaller size
BOOST products silicone Cobra-style elbow 3.5" / 89mm - 90° High-quality 90 degree cobra head style silicone elbow in black Designed for tight 90 degree bends with minimal flow restriction The Cobra-head-style silicone elbow is ideal for applications requiring a compact 90-degree turn without compromising airflow. Mainly used in situations with low clearance, these silicone elbows are a popular choice for our intake manifolds, especially when the throttle body is on the passenger side. The Cobra-style silicone elbows can be used effectively on both the pressure and intake side of your turbo system. This BOOST products silicone hose is made from fabric-reinforced silicone so that it remains extremely pressure-resistant and also vacuum-resistant. These hoses are suitable for charge air pipes, intakes, coolant lines and similar. They are pressure-resistant up to 5bar and temperature-resistant up to 220°C. Not suitable as a fuel or oil line! Inner diameter: 3.5" / 89mm Overall length: n/a Maximum width: n/a Maximum depth: n/a Wall thickness: 5,3mm Fabric plies: 4 Temperature range: -40°C to 220°C Pressure-resistant up to: at least 5 bar Colour: black (full) After extensive testing, we deliver top quality at the best price! In quality tests, our BOOST products silicone hoses have always matched, and several times even exceeded, the quality of the best-known silicone hose manufacturer. Our silicone is very durable and stays flexible, stable and colourfast even after years. Many well-known companies in tuning and motorsport rely on silicone hoses from our range. Put your trust in our quality too! Up to 38mm, BOOST products silicone hoses have 3 fabric plies and 4,3mm wall thickness. From 41mm upwards they have 4 plies with 5,3mm wall thickness. They come with a small, discreet BOOST products logo that seals the quality of the hoses. What you should know about silicone - the diameter refers to the inner diameter - add 2x the wall thickness to choose the correct clamp size - silicone hoses can stretch by 1-3mm - if you cannot find the right size, choose the next smaller size
BOOST products silicone Cobra-style elbow 3.5" / 89mm - 90° High-quality 90 degree cobra head style silicone elbow in blue Designed for tight 90 degree bends with minimal flow restriction The Cobra-head-style silicone elbow is ideal for applications requiring a compact 90-degree turn without compromising airflow. Mainly used in situations with low clearance, these silicone elbows are a popular choice for our intake manifolds, especially when the throttle body is on the passenger side. The Cobra-style silicone elbows can be used effectively on both the pressure and intake side of your turbo system. This BOOST products silicone hose is made from fabric-reinforced silicone so that it remains extremely pressure-resistant and also vacuum-resistant. These hoses are suitable for charge air pipes, intakes, coolant lines and similar. They are pressure-resistant up to 5bar and temperature-resistant up to 220°C. Not suitable as a fuel or oil line! Inner diameter: 3.5" / 89mm Overall length: n/a Maximum width: n/a Maximum depth: n/a Wall thickness: 5,3mm Fabric plies: 4 Temperature range: -40°C to 220°C Pressure-resistant up to: at least 5 bar Colour: blue (full) After extensive testing, we deliver top quality at the best price! In quality tests, our BOOST products silicone hoses have always matched, and several times even exceeded, the quality of the best-known silicone hose manufacturer. Our silicone is very durable and stays flexible, stable and colourfast even after years. Many well-known companies in tuning and motorsport rely on silicone hoses from our range. Put your trust in our quality too! Up to 38mm, BOOST products silicone hoses have 3 fabric plies and 4,3mm wall thickness. From 41mm upwards they have 4 plies with 5,3mm wall thickness. They come with a small, discreet BOOST products logo that seals the quality of the hoses. What you should know about silicone - the diameter refers to the inner diameter - add 2x the wall thickness to choose the correct clamp size - silicone hoses can stretch by 1-3mm - if you cannot find the right size, choose the next smaller size
BOOST products silicone Cobra-style elbow 4.0" / 102mm - 90° High-quality 90 degree cobra head style silicone elbow in black Designed for tight 90 degree bends with minimal flow restriction The Cobra-head-style silicone elbow is ideal for applications requiring a compact 90-degree turn without compromising airflow. Mainly used in situations with low clearance, these silicone elbows are a popular choice for our intake manifolds, especially when the throttle body is on the passenger side. The Cobra-style silicone elbows can be used effectively on both the pressure and intake side of your turbo system. This BOOST products silicone hose is made from fabric-reinforced silicone so that it remains extremely pressure-resistant and also vacuum-resistant. These hoses are suitable for charge air pipes, intakes, coolant lines and similar. They are pressure-resistant up to 5bar and temperature-resistant up to 220°C. Not suitable as a fuel or oil line! Inner diameter: 4.0" / 102mm Overall length: approx. 302mm Maximum width: 168mm Maximum depth: approx. 104mm Wall thickness: 5,3mm Fabric plies: 4 Temperature range: -40°C to 220°C Pressure-resistant up to: at least 5 bar Colour: black (full) After extensive testing, we deliver top quality at the best price! In quality tests, our BOOST products silicone hoses have always matched, and several times even exceeded, the quality of the best-known silicone hose manufacturer. Our silicone is very durable and stays flexible, stable and colourfast even after years. Many well-known companies in tuning and motorsport rely on silicone hoses from our range. Put your trust in our quality too! Up to 38mm, BOOST products silicone hoses have 3 fabric plies and 4,3mm wall thickness. From 41mm upwards they have 4 plies with 5,3mm wall thickness. They come with a small, discreet BOOST products logo that seals the quality of the hoses. What you should know about silicone - the diameter refers to the inner diameter - add 2x the wall thickness to choose the correct clamp size - silicone hoses can stretch by 1-3mm - if you cannot find the right size, choose the next smaller size
BOOST products silicone Cobra-style elbow 4.0" / 102mm - 90° High-quality 90 degree cobra head style silicone elbow in blue Designed for tight 90 degree bends with minimal flow restriction The Cobra-head-style silicone elbow is ideal for applications requiring a compact 90-degree turn without compromising airflow. Mainly used in situations with low clearance, these silicone elbows are a popular choice for our intake manifolds, especially when the throttle body is on the passenger side. The Cobra-style silicone elbows can be used effectively on both the pressure and intake side of your turbo system. This BOOST products silicone hose is made from fabric-reinforced silicone so that it remains extremely pressure-resistant and also vacuum-resistant. These hoses are suitable for charge air pipes, intakes, coolant lines and similar. They are pressure-resistant up to 5bar and temperature-resistant up to 220°C. Not suitable as a fuel or oil line! Inner diameter: 4.0" / 102mm Overall length: approx. 302mm Maximum width: 168mm Maximum depth: approx. 104mm Wall thickness: 5,3mm Fabric plies: 4 Temperature range: -40°C to 220°C Pressure-resistant up to: at least 5 bar Colour: blue (full) After extensive testing, we deliver top quality at the best price! In quality tests, our BOOST products silicone hoses have always matched, and several times even exceeded, the quality of the best-known silicone hose manufacturer. Our silicone is very durable and stays flexible, stable and colourfast even after years. Many well-known companies in tuning and motorsport rely on silicone hoses from our range. Put your trust in our quality too! Up to 38mm, BOOST products silicone hoses have 3 fabric plies and 4,3mm wall thickness. From 41mm upwards they have 4 plies with 5,3mm wall thickness. They come with a small, discreet BOOST products logo that seals the quality of the hoses. What you should know about silicone - the diameter refers to the inner diameter - add 2x the wall thickness to choose the correct clamp size - silicone hoses can stretch by 1-3mm - if you cannot find the right size, choose the next smaller size
Description 90° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 90° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description 90° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 90° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description 90° silicone elbow hose for Air or coolant applications. The hose is multiple layers of fabric reinforcement constructed, giving it particularly high stability, pressure resistance and long service life. The stated diameter refers to the Inner diameter (ID) of the silicone elbow hose. Properties: 90° bend (U-shape) High-quality, flexible silicone Multi-ply fabric reinforcement Suitable for air and coolant Temperature and pressure resistant Inner diameter as selected Applications: Automotive and motorsport Cooling and charge air systems Industrial and workshop applications Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).