QSP Silicone Hose - 100 cm Straight - 127mm - Black
€126.14
Available, delivery time: 3 - 4 days
Product information "QSP Silicone Hose - 100 cm Straight - 127mm - Black"
Description
Straight silicone hose for air and coolant applications.
The hose features multiple layers of fabric reinforcement, which give it particularly high strength, pressure stability and durability .
The stated diameter corresponds to the Inner diameter (ID) of the silicone hose.
Ideally suited for applications in automotive, motorsport, industrial and workshop settings.
Technical data
Material & construction
-
Material: silicone VMQ (vinyl methyl)
-
Fabric reinforcement: polyester
-
Wall thickness: approx. 4–5 mm
-
Number of plies: at least 3 plies
(larger diameters with 4 or more plies)
Temperature range
-
Operating temperature: -60 °C to +180 °C
Mechanical properties
-
Hardness: 65–75 Shore A
-
Tensile strength: at least 6,0 MPa (N/mm²)
-
Elongation at break: at least 200 %
-
Compression set: max. 40 % (70 h at 150 °C)
Pressure ratings (depending on inner diameter)
| Inner diameter | Working pressure | Burst pressure |
|---|---|---|
| 6 – 10 mm | 10 bar | 18 bar |
| 11 – 18 mm | 7 bar | 15,5 bar |
| 19 – 28 mm | 6 bar | 11,5 bar |
| 29 – 35 mm | 4 bar | 8,9 bar |
| 36 – 44 mm | 3 bar | 7,4 bar |
| 45 – 55 mm | 2 bar | 6,1 bar |
| 56 – 65 mm | 1,5 bar | 5 bar |
| 66 – 80 mm | 1,5 bar | 4 bar |
| 81 – 90 mm | 1 bar | 2,9 bar |
| 91 – 102 mm | 1 bar | 2 bar |
Properties
-
Resistant to ageing and moisture
-
Very good weather resistance
-
UV and ozone resistant
-
Free from harmful substances
-
Good electrical insulation
-
Permanently elastic
Chemical resistance
Resistant to:
-
Dilute acids and alkalis
-
Hot and cold water
-
Hot air
-
Ozone
-
UV radiation
Limited suitability for:
-
Oils, lubricants and greases
-
OAT coolants (organic acids)
-
Organic acid based coolants
Notes on working and burst pressure
-
Working pressure: Pressure at which the hose is used in normal operation
-
Burst pressure: Maximum pressure at which the material fails
(depending on wall thickness and tensile strength)
Cutting & processing
-
The hose can be easily cut to the desired length
-
Recommendation: place a hose clamp at the cutting point and cut with a sharp knife
Dimensions & notes
-
All dimensions in millimetres (mm)
-
Stated hose diameters = Inner diameter (ID)
-
Aluminium pipes = Outer diameter (OD)
Example:
A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
| Brand: | QSP |
|---|---|
| Colour: | Black |
| Condition: | New |
| Inner Diameter (mm): | 127mm |
| Length: | 100 cm |
| Material: | Silicone |
| Shape: | 0° Straight |
Manufacturer:
Matching clamps
HD HOSE CLAMP, BLACK, 8-14MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 10mmSize: 8mm to 14mmPlease note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 11-17MM Strongest clamp of this type With black metal head Width: 10 mmSize: 11mm to 17mm Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 11,7mmSize: 11mm to 17mmPlease note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 13-20MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 11,7mmSize: 13mm to 20mmPlease note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 22-32MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 12mmSize: 22mm to 32mm Please note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 15-24MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 12mmSize: 15mm to 24mm Please note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 19-28MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 12mmSize: 19mm to 28mm Please note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 26-38MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 12mmSize: 26mm to 38mm Please note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 32-44MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 12mmSize: 32mm to 44mm Please note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
Similar products
BOOST products flex silicone hose - 0,5m - 32mm, black Top quality and super flexible! High-quality flexible silicone hose with fabric plies and spiral wire reinforcement This BOOST products silicone hose is a charge air hose made from silicone, reinforced with fabric to remain extremely pressure-resistant and vacuum-resistant. In addition, this hose has an embedded spiral wire and a silicone outer layer cut between the wire coils. This makes the silicone hose bendable, and thanks to the wire reinforcement it does not kink. This flex hose is particularly suitable for water lines and similar applications with gentle bends where vibrations also need to be absorbed. A typical application is the connection between engine and radiator. All BOOST products silicone hoses are pressure-resistant up to 5bar and temperature-resistant up to 220°C. Not suitable as a fuel or oil line! Inner diameter: 32mm Length: 0,5m Wall thickness: 4,3mm Fabric plies: 3 With wire spiral reinforcement Temperature range: -40°C to 220°C Pressure resistant up to: at least 5bar Colour: black (complete) After extensive testing, we deliver top quality at the best price! In quality tests, our BOOST products silicone hoses have always matched, and several times even exceeded, the quality of the best-known silicone hose manufacturer. Our silicone is very durable and stays flexible, stable and colourfast even after years. Many well-known companies in tuning and motorsport rely on silicone hoses from our range. Put your trust in our quality too! Up to 38mm, BOOST products silicone hoses have 3 fabric plies and 4,3mm wall thickness. From 41mm upwards they have 4 plies with 5,3mm wall thickness. They come with a small, discreet BOOST products logo that seals the quality of the hoses. What you should know about silicone - the diameter refers to the inner diameter - add 2x the wall thickness to choose the correct clamp size - silicone hoses can stretch by 1-3mm - if you cannot find the right size, choose the next smaller size
Description Straight silicone hose for air and coolant applications. The hose features multiple layers of fabric reinforcement, which give it particularly high strength, pressure stability and durability . The stated diameter corresponds to the Inner diameter (ID) of the silicone hose. Ideally suited for applications in automotive, motorsport, industrial and workshop settings. Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description Straight silicone hose for air and coolant applications. The hose features multiple layers of fabric reinforcement, which give it particularly high strength, pressure stability and durability . The stated diameter corresponds to the Inner diameter (ID) of the silicone hose. Ideally suited for applications in automotive, motorsport, industrial and workshop settings. Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description Straight silicone hose for air and coolant applications. The hose features multiple layers of fabric reinforcement, which give it particularly high strength, pressure stability and durability . The stated diameter corresponds to the Inner diameter (ID) of the silicone hose. Ideally suited for applications in automotive, motorsport, industrial and workshop settings. Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description Straight silicone hose for air and coolant applications. The hose features multiple layers of fabric reinforcement, which give it particularly high strength, pressure stability and durability . The stated diameter corresponds to the Inner diameter (ID) of the silicone hose. Ideally suited for applications in automotive, motorsport, industrial and workshop settings. Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description Straight silicone hose for air and coolant applications. The hose features multiple layers of fabric reinforcement, which give it particularly high strength, pressure stability and durability . The stated diameter corresponds to the Inner diameter (ID) of the silicone hose. Ideally suited for applications in automotive, motorsport, industrial and workshop settings. Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description Straight silicone hose for air and coolant applications. The hose features multiple layers of fabric reinforcement, which give it particularly high strength, pressure stability and durability . The stated diameter corresponds to the Inner diameter (ID) of the silicone hose. Ideally suited for applications in automotive, motorsport, industrial and workshop settings. Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description Straight silicone hose for air and coolant applications. The hose features multiple layers of fabric reinforcement, which give it particularly high strength, pressure stability and durability . The stated diameter corresponds to the Inner diameter (ID) of the silicone hose. Ideally suited for applications in automotive, motorsport, industrial and workshop settings. Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description Straight silicone hose for air and coolant applications. The hose features multiple layers of fabric reinforcement, which give it particularly high strength, pressure stability and durability . The stated diameter corresponds to the Inner diameter (ID) of the silicone hose. Ideally suited for applications in automotive, motorsport, industrial and workshop settings. Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description Straight silicone hose for air and coolant applications. The hose features multiple layers of fabric reinforcement, which give it particularly high strength, pressure stability and durability . The stated diameter corresponds to the Inner diameter (ID) of the silicone hose. Ideally suited for applications in automotive, motorsport, industrial and workshop settings. Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description Straight silicone hose for air and coolant applications. The hose features multiple layers of fabric reinforcement, which give it particularly high strength, pressure stability and durability . The stated diameter corresponds to the Inner diameter (ID) of the silicone hose. Ideally suited for applications in automotive, motorsport, industrial and workshop settings. Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description Straight silicone hose for air and coolant applications. The hose features multiple layers of fabric reinforcement, which give it particularly high strength, pressure stability and durability . The stated diameter corresponds to the Inner diameter (ID) of the silicone hose. Ideally suited for applications in automotive, motorsport, industrial and workshop settings. Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).