QSP Oil T-Piece Gauge Kit 1/8 NPT with 50cm Line
€47.96
Available, delivery time: 3 - 4 days
Product information "QSP Oil T-Piece Gauge Kit 1/8 NPT with 50cm Line"
Item description
For sale is a QSP oil T-piece remote kit with 1/8 NPT ports and 50cm line.
This kit was developed for applications where there is not enough space for a standard oil T-piece directly on the engine block. The T-piece can be mounted flexibly in a suitable location and is connected to the port on the engine block via a steel-braided line.
The connection on the engine block is made at the original position of the oil pressure switch. The thread on the T-piece matches the port on the engine block, so the original oil pressure switch can be refitted. In addition, the T-piece has a 1/8 NPT side port for a sensor or a line for an oil pressure gauge.
Product details
Manufacturer: QSP Products
Item Oil T-piece remote kit
Material: aluminium
Design T-piece, can be mounted remotely
Thread 1/8 NPT
Thread on both sides 1/8 NPT
Sensor port 1/8 NPT
Line Steel-braided
Line length 50cm
Mounting position Engine block / oil pressure switch
Application Oil / oil pressure gauge
Packaging unit: 1 set
Suitable for
Oil pressure gauges
Oil pressure sensors
Oil pressure lines
Original oil pressure switches
Engine block ports
Oil circuits
Tight installation spaces
Motorsport
Vehicle tuning
Conversion and project vehicles
| Colour: | Black |
|---|---|
| Condition: | New |
| Connection: | 1/8 NPT |
| Material: | Aluminium |
Manufacturer:
Matching hoses & fittings
Used Aluminium Fitting Dash 4 (AN4 / JIC4) – Straight – Blue/Red Anodised – Arlows Used Aluminium fitting Dash 4 (AN4 / JIC4) in straight design, blue/red anodised. High-quality fitting from the brand Arlows, ideal for fuel, oil or charge air lines in motorsport and tuning. Details: Manufacturer: Arlows Connection size: Dash 4 / AN4 / JIC4 Version: straight Material: Aluminium Finish: blue/red anodised Condition: used, fully functional Areas of use: Petrol and oil lines Boost/vacuum systems Motorsport and performance applications
Reusable aluminium fitting with UNF thread (Dash system) and 360° rotational adjustment. This makes it possible to make up your own lines to individual requirements for numerous applications (oil, water, fuel, brake, clutch systems) and fit them without stress. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our stainless braided lines (or alternatively lines from other manufacturers with the same dimensions) can be used. The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5.56mm / outer diameter 11.13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8.73mm / outer diameter 13.89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11.12mm / outer diameter 16.28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14.27mm / outer diameter 20.24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17.47mm / outer diameter 23.82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22.20mm / outer diameter 30.50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28.50mm / outer diameter 35.81mm
Used Aluminium Fitting 180° – Dash 6 / AN6 / JIC6 – Blue/Red Anodised Used Aluminium fitting in 180° version, suitable for Dash 6 / AN6 / JIC6 connections. Ideal for fuel, oil or coolant lines in motorsport or DIY projects. The fitting is made of lightweight, robust aluminium and is blue/red anodised. Details: Material: Aluminium Connection size: Dash 6 / AN6 / JIC6 Version: 180° angle Colour: Blue / red anodised Condition: used, in working order
Used aluminium fitting 45° – Dash 8 / AN8 / JIC 8 – blue/red anodised Used Aluminium fitting with 45° angle, suitable for Dash 8 / AN8 / JIC 8 connections. Ideal for fuel, oil or coolant lines in motorsport and tuning. Made from light, durable aluminium and blue/red anodised. Details: Connection size: Dash 8 / AN8 / JIC 8 Angle: 45° Material: Aluminium, anodised Colour: Blue/red Condition: used, functional
RHP – Dash 4 / -04 AN hose fitting – 90° fitting High-quality RHP Dash 4 (-04 AN) 90° hose fitting, ideal for oil, fuel and water systems in motorsport and tuning. Precisely manufactured and reliably leak-tight – perfect for custom builds or extending existing AN line systems. Details Type: 90° fitting / hose fitting Size: Dash 4 / -04 AN Manufacturer: RHP Material: Aluminium (black anodised – if different, please let us know) Areas of use: Oil, water, fuel, vacuum, motorsport
Used 180° aluminium fitting Dash 10 (AN10 / JIC10) – black anodised Used Aluminium fitting in 180° design, suitable for Dash 10 / AN10 / JIC10 connections. Ideal for fuel, oil or charge air systems in motorsport or custom conversions. The black anodised surface provides corrosion protection and a high-quality look. Details: Connection size: Dash 10 / AN10 / JIC10 Version: 180° bend Material: Aluminium Colour: black anodised Condition: used, functional Applications: Oil circuits, fuel systems, catch tank setups, charge air systems and other motorsport applications.
BOOST products hose fitting swivel Dash 4 - straight - matt black Aluminium fitting for BOOST products hydraulic hoses Dash 4 with 0° in matt black High-quality AN / Dash hydraulic hose end fitting, suitable for E85 fuel as well as oil and pneumatic systems Thread A: -04 AN / Dash 4 - straight Version: For BOOST products hydraulic hoses (nylon, stainless steel) Material: Aluminium Colour: Matt black BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.
BOOST products Hose Fitting Swivel Dash 4 - Straight - Matt Silver Aluminium fitting for BOOST products hydraulic hoses Dash 4 with 0° in matt silver High-quality AN / Dash hydraulic hose end fitting, suitable for E85 fuel as well as oil and pneumatic systems Thread A: -04 AN / Dash 4 - straight Version: For BOOST products hydraulic hoses (nylon, stainless steel) Material: Aluminium Colour: Matt silver BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.
Reusable aluminium fitting with UNF thread (Dash system) and 360° rotational adjustment. This makes it possible to make up your own lines to individual requirements for numerous applications (oil, water, fuel, brake, clutch systems) and fit them without stress. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our stainless braided lines (or alternatively lines from other manufacturers with the same dimensions) can be used. The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5.56mm / outer diameter 11.13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8.73mm / outer diameter 13.89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11.12mm / outer diameter 16.28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14.27mm / outer diameter 20.24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17.47mm / outer diameter 23.82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22.20mm / outer diameter 30.50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28.50mm / outer diameter 35.81mm
Reusable aluminium fitting with UNF thread (Dash system) and 360° rotational adjustment. This makes it possible to make up your own lines to individual requirements for numerous applications (oil, water, fuel, brake, clutch systems) and fit them without stress. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our stainless braided lines (or alternatively lines from other manufacturers with the same dimensions) can be used. The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5.56mm / outer diameter 11.13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8.73mm / outer diameter 13.89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11.12mm / outer diameter 16.28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14.27mm / outer diameter 20.24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17.47mm / outer diameter 23.82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22.20mm / outer diameter 30.50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28.50mm / outer diameter 35.81mm
BOOST products hose fitting swivel Dash 6 - straight - matt black Aluminium fitting for BOOST products hydraulic hoses Dash 6 with 0° in matt black High-quality AN / Dash hydraulic hose end fitting, suitable for E85 fuel as well as oil and pneumatic systems Thread A: -06 AN / Dash 6 - straight Version: For BOOST products hydraulic hoses (nylon, stainless steel) Material: Aluminium Colour: Matt black BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.
BOOST products hose fitting swivel Dash 6 - straight - matt silver Aluminium fitting for BOOST products hydraulic hoses Dash 6 with 0° in matt silver High-quality AN / Dash hydraulic hose end fitting, suitable for E85 fuel as well as oil and pneumatic systems Thread A: -06 AN / Dash 6 - straight Version: For BOOST products hydraulic hoses (nylon, stainless steel) Material: Aluminium Colour: Matt silver BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.
Similar products
Item description For sale is a QSP oil pressure gauge with a measuring range of 0 to 10 bar. QSP high-quality oil pressure gauge for reliable monitoring of oil pressure. The gauge has a diameter of 52mm and a mounting depth of 60mm and is ideal for road use, tuning projects and track days. The clear scale, red needle, white backlighting and black dial ensure good readability day and night. The gauge is connected to a 12V system and is supplied with mounting hardware. The matching QMO-OPS oil pressure sensor is required for correct operation. The sensor is not included in the scope of delivery and must be ordered separately. Product details Manufacturer: QSP Products Item Oil pressure gauge Gauge type Oil pressure Measuring range 0-10 bar Diameter 52mm Length 52mm Width 52mm Installation depth 60mm Height 60mm Colour: black Illuminated display yes Illumination white Voltage 12V Mounting hardware included yes Required sensor QMO-OPS Part number QMO-OP Packaging unit: 1 pieces Suitable for Oil pressure monitoring Motorsport Vehicle tuning Track days Road vehicles Racing Conversion and project vehicles 12V vehicle electrical system Additional gauges Gauges Workshop
For sale is an aluminium T-piece adapter for connecting an oil pressure sensor or a line to an oil pressure gauge. The T-piece is screwed into the engine block in place of the original oil pressure switch. The rear thread matches the connection on the engine block, so the original oil pressure switch can be screwed back into the T-piece. In addition, the adapter has a second threaded port on the side with 1/8 NPT. This port is suitable for fitting a sensor or a line for an oil pressure gauge.
For sale is an aluminium T-piece adapter for connecting an oil pressure sensor or a line to an oil pressure gauge. The T-piece is screwed into the engine block in place of the original oil pressure switch. The rear thread matches the connection on the engine block, so the original oil pressure switch can be screwed back into the T-piece. In addition, the adapter has a second threaded port on the side with 1/8 NPT. This port is suitable for fitting a sensor or a line for an oil pressure gauge.
For sale is an aluminium T-piece adapter for connecting an oil pressure sensor or a line to an oil pressure gauge. The T-piece is screwed into the engine block in place of the original oil pressure switch. The rear thread matches the connection on the engine block, so the original oil pressure switch can be screwed back into the T-piece. In addition, the adapter has a second threaded port on the side with 1/8 NPT. This port is suitable for fitting a sensor or a line for an oil pressure gauge.
For sale is an aluminium T-piece adapter for connecting an oil pressure sensor or a line to an oil pressure gauge. The T-piece is screwed into the engine block in place of the original oil pressure switch. The rear thread matches the connection on the engine block, so the original oil pressure switch can be screwed back into the T-piece. In addition, the adapter has a second threaded port on the side with 1/8 NPT. This port is suitable for fitting a sensor or a line for an oil pressure gauge.
For sale is an aluminium T-piece adapter for connecting an oil pressure sensor or a line to an oil pressure gauge. The T-piece is screwed into the engine block in place of the original oil pressure switch. The rear thread matches the connection on the engine block, so the original oil pressure switch can be screwed back into the T-piece. In addition, the adapter has a second threaded port on the side with 1/8 NPT. This port is suitable for fitting a sensor or a line for an oil pressure gauge.
For sale is an aluminium T-piece adapter for connecting an oil pressure sensor or a line to an oil pressure gauge. The T-piece is screwed into the engine block in place of the original oil pressure switch. The rear thread matches the connection on the engine block, so the original oil pressure switch can be screwed back into the T-piece. In addition, the adapter has a second threaded port on the side with 1/8 NPT. This port is suitable for fitting a sensor or a line for an oil pressure gauge.
For sale is an aluminium T-piece adapter for connecting an oil pressure sensor or a line to an oil pressure gauge. The T-piece is screwed into the engine block in place of the original oil pressure switch. The rear thread matches the connection on the engine block, so the original oil pressure switch can be screwed back into the T-piece. In addition, the adapter has a second threaded port on the side with 1/8 NPT. This port is suitable for fitting a sensor or a line for an oil pressure gauge.
Item description For sale is a QSP oil temperature gauge with a measuring range of 50 to 150°C. QSP high-quality oil temperature gauge for reliable monitoring of oil temperature. The gauge has a diameter of 52mm and a mounting depth of 60mm and is ideal for road use, tuning projects, classic cars and track cars. The illuminated display ensures good readability even in the dark. The gauge is connected to a 12V system and is supplied with mounting hardware. The matching QMO-OTS oil temperature sensor is required for correct operation. The sensor is not included in the scope of delivery and must be ordered separately. Product details Manufacturer: QSP Products Item Oil temperature gauge Gauge type Oil temperature Measuring range 50-150°C Diameter 52mm Length 52mm Width 52mm Installation depth 60mm Height 60mm Colour: black Illuminated display yes Voltage 12V Mounting hardware included yes Required sensor QMO-OTS Part number QMO-OT Packaging unit: 1 pieces Suitable for Oil temperature monitoring Motorsport Vehicle tuning Track days Road vehicles Classic cars Racing Conversion and project vehicles 12V vehicle electrical system Additional gauges Gauges Workshop