QSP Lightweight Fitting 90° AN16 Dash 16
€45.82
Available, delivery time: 3 - 4 days
Product information "QSP Lightweight Fitting 90° AN16 Dash 16"
90° aluminium hose adapter without cutting ring. This fitting is intended for use with stainless steel or nylon braided rubber hoses and provides a secure, leak-tight connection when correctly installed.
The 90° design allows space-saving line routing in tight installation spaces. Fitting is simple and gives a clean look.
Product features:
-
90° version without cutting ring
-
Suitable for rubber hoses with stainless steel or nylon braiding
-
Sizes AN4 to AN20 available
-
Colours: blue/red and black
Suitable for industrial, motorsport and automotive applications as well as oil, fuel, water and air lines, depending on the respective system design.
| Brand: | QSP |
|---|---|
| Colour: | Black |
| Condition: | New |
| Connection: | 1 5/16-12 UNF, Dash 16 |
| Hose Type: | Rubber Core Hose |
| Material: | Stainless Steel |
| Shape: | 90° Elbow |
Manufacturer:
Matching hoses (Dash 16)
Reinforced fuel/oil hose made from synthetic rubber with stainless steel core & nylon braid – AN4 to AN20 – price per metreThis high-quality, reinforced fuel and oil hose was specially developed for applications where high performance, reliability and low weight are crucial. Ideally suited for motorsport, vehicle building, industry and many other technical applications.The hose features a flexible stainless steel inner core, which is embedded in a synthetic chlorinated polyethylene inner layer . This achieves particularly high stability and pressure resistance. The braided nylon outer sheath additionally protects against abrasion, wear and external influences while also providing weight reduction in the vehicle.Thanks to its special construction, this hose is compatible with various fitting types. Both connections with cutting ring (cutting edge) and connections without cutting ring can be used.Product features:Reinforced high-performance hose for fuel and oilFlexible stainless steel inner core for maximum stabilitySynthetic inner lining (CPE) for high resistanceBraided nylon outer sheath for protection against abrasion and wearReduced weight compared with conventional steel-braided hosesHigh flexibility and long service lifeSuitable for the following media:CoolantOilAirMethanolLubricantsE85 fuelVacuum applicationsTechnical data:Minimum bend radius: 63,5 mm (2,5")Sizes:Available immediately: AN4 – AN20Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines
Fuel/oil hose made from reinforced synthetic rubber with double stainless steel braid – AN4 to AN20 – price per metreHigh-quality Fuel and oil hose with double stainless steel braid, developed for demanding applications in motorsport, vehicle building and industry. The robust construction ensures high pressure resistance, long service life and optimum protection against abrasion and corrosion.The hose consists of a reinforced synthetic rubber inner core, which is sheathed in a double stainless steel braid . This construction provides additional stability as well as protection against external influences and mechanical stress.Thanks to its special design, this hose is compatible with a wide range of fittings. Both connections with cutting ring (cutting edge) and connections without cutting ring can be used without any problems.Product features:High-quality Fuel/oil hose with double stainless steel braidReinforced synthetic rubber inner coreHigh resistance to abrasion and corrosionVery durable and pressure resistantSuitable for various connection typesSuitable for the following media:CoolantOilAirMethanolLubricantsE85 fuelVacuum applicationsTechnical data:Minimum bend radius: 63,5 mm (2,5")Sizes:Available immediately: AN4 – AN20Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines
Matching adapters (Dash 16)
For sale is a black QSP aluminium oil cooler adapter, straight, from metric thread to Dash / AN. Black QSP aluminium adapter. The adapter has a straight design and serves as a transition adapter from metric fittings to AN / Dash fittings. The adapter is ideal for oil coolers, oil lines and custom builds in motorsport, tuning and automotive applications.
For sale is a QSP aluminium adapter in male - male version from Dash / AN to NPT thread, in black. QSP aluminium adapter in black. The adapter has a straight design and is suitable as a transition adapter from AN / Dash connections to NPT connections. The adapter is suitable for fuel and oil applications as well as various motorsport, tuning and conversion projects.
For sale is a QSP aluminium adapter in male - male version from Dash / AN to NPT thread, in black. QSP aluminium adapter in black. The adapter has a straight design and is suitable as a transition adapter from AN / Dash connections to NPT connections. The adapter is suitable for fuel and oil applications as well as various motorsport, tuning and conversion projects.
For sale is a QSP aluminium adapter in male - male version from Dash / AN to NPT thread, in blue. QSP aluminium adapter in blue. The adapter has a straight design and is suitable as a transition adapter from AN / Dash connections to NPT connections. The adapter is suitable for fuel and oil applications as well as various motorsport, tuning and conversion projects.
For sale is a QSP aluminium adapter in male - male version from Dash / AN to NPT thread, in blue. QSP aluminium adapter in blue. The adapter has a straight design and is suitable as a transition adapter from AN / Dash connections to NPT connections. The adapter is suitable for fuel and oil applications as well as various motorsport, tuning and conversion projects.
For sale is a QSP aluminium reducer adapter in male - male design for Dash / AN connections with O-ring. QSP aluminium adapter in high-quality design. The adapter has a male - male design and is suitable as a reducer or transition adapter between different Dash / AN sizes. The O-ring ensures a clean seal on the matching connection. The adapter is suitable for fuel and oil applications as well as various motorsport, tuning and conversion projects.
For sale is a QSP aluminium reducer adapter in male - male design for Dash / AN connections with O-ring. QSP aluminium adapter in high-quality design. The adapter has a male - male design and is suitable as a reducer or transition adapter between different Dash / AN sizes. The O-ring ensures a clean seal on the matching connection. The adapter is suitable for fuel and oil applications as well as various motorsport, tuning and conversion projects.
For sale is a QSP aluminium O-ring adapter in male design for Dash / AN connections, in black. QSP aluminium adapter in black. The adapter has a male design and is suitable as a connecting or transition adapter for Dash / AN connections. The O-ring ensures a clean seal on the matching connection. The adapter is suitable for fuel and oil applications as well as various motorsport, tuning and conversion projects.
For sale is a QSP aluminium O-ring adapter in male design for Dash / AN connections, in black. QSP aluminium adapter in black. The adapter has a male design and is suitable as a connecting or transition adapter for Dash / AN connections. The O-ring ensures a clean seal on the matching connection. The adapter is suitable for fuel and oil applications as well as various motorsport, tuning and conversion projects.
For sale is a QSP aluminium adapter in straight male design for Dash / AN connections, in black. QSP aluminium adapter in black. The connection is male and has a straight design, allowing clean and easy installation. The adapter is suitable for fuel and oil applications as well as various motorsport, tuning and conversion projects.
For sale is a QSP aluminium adapter in straight male design for Dash / AN connections. QSP aluminium adapter in high-quality design. The connection is male and has a straight design, allowing clean and easy installation. The adapter is suitable for fuel and oil applications as well as various motorsport, tuning and conversion projects.
Item description For sale is a QSP aluminium coupler in straight female - female design with rotating swivel connection. QSP aluminium coupler in high-quality design. The connection is straight and features a rotating swivel function, allowing flexible and clean installation. The coupler is available in various sizes from Dash 3 / AN3 to Dash 16 / AN16 and in blue and black. Suitable for fuel and oil applications as well as various motorsport, industrial and vehicle projects.
Similar products
BOOST products -12 AN / Dash 12 fitting / bung for oil catch tank - matt black Replacement fitting / spigot for the top outlet of BOOST products oil catch tanks High-quality threaded bung / fitting, suitable for catch tanks Replacement fitting / spigot for the top outlet of BOOST products oil catch tanks Material: Aluminium Thread:- 12 AN / Dash 12 Inner diameter: 21mm Overall height: 17,4mm Max. width: 31mm Colour: Matt black BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
Dash 6 to Dash 6 adapter with sensor port
Aluminium fitting black AN10 Dash 10 180° Reusable aluminium hose end with UNF thread (Dash system) and 360° swivel. This allows you to make up your own lines to suit individual needs and numerous applications (oil, water, fuel, brake and clutch systems) and install them stress-free. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our braided lines can be used (alternatively, lines from other manufacturers with the same dimensions). The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5,56mm / outer diameter 11,13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8,73mm / outer diameter 13,89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11,12mm / outer diameter 16,28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14,27mm / outer diameter 20,24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17,47mm / outer diameter 23,82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22,20mm / outer diameter 30,50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28,50mm / outer diameter 35,81mm
Aluminium fitting black AN10 Dash 10 45° Reusable aluminium hose end with UNF thread (Dash system) and 360° swivel. This allows you to make up your own lines to suit individual needs and numerous applications (oil, water, fuel, brake and clutch systems) and install them stress-free. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our braided lines can be used (alternatively, lines from other manufacturers with the same dimensions). The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5,56mm / outer diameter 11,13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8,73mm / outer diameter 13,89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11,12mm / outer diameter 16,28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14,27mm / outer diameter 20,24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17,47mm / outer diameter 23,82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22,20mm / outer diameter 30,50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28,50mm / outer diameter 35,81mm
Reusable aluminium hose end with UNF thread (Dash system) and 360° swivel. This allows you to make up your own lines to suit individual needs and numerous applications (oil, water, fuel, brake and clutch systems) and install them stress-free. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our braided lines can be used (alternatively, lines from other manufacturers with the same dimensions). The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5,56mm / outer diameter 11,13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8,73mm / outer diameter 13,89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11,12mm / outer diameter 16,28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14,27mm / outer diameter 20,24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17,47mm / outer diameter 23,82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22,20mm / outer diameter 30,50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28,50mm / outer diameter 35,81mm
Reusable aluminium hose end with UNF thread (Dash system) and 360° swivel. This allows you to make up your own lines to suit individual needs and numerous applications (oil, water, fuel, brake and clutch systems) and install them stress-free. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our braided lines can be used (alternatively, lines from other manufacturers with the same dimensions). The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5,56mm / outer diameter 11,13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8,73mm / outer diameter 13,89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11,12mm / outer diameter 16,28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14,27mm / outer diameter 20,24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17,47mm / outer diameter 23,82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22,20mm / outer diameter 30,50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28,50mm / outer diameter 35,81mm
Aluminium fitting black AN12 Dash 12 straight Reusable aluminium hose end with UNF thread (Dash system) and 360° swivel. This allows you to make up your own lines to suit individual needs and numerous applications (oil, water, fuel, brake and clutch systems) and install them stress-free. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our braided lines can be used (alternatively, lines from other manufacturers with the same dimensions). The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5,56mm / outer diameter 11,13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8,73mm / outer diameter 13,89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11,12mm / outer diameter 16,28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14,27mm / outer diameter 20,24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17,47mm / outer diameter 23,82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22,20mm / outer diameter 30,50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28,50mm / outer diameter 35,81mm
Reusable aluminium fitting with UNF thread (Dash system) and 360° rotational adjustment. This makes it possible to make up your own lines to individual requirements for numerous applications (oil, water, fuel, brake, clutch systems) and fit them without stress. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our stainless braided lines (or alternatively lines from other manufacturers with the same dimensions) can be used. The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5.56mm / outer diameter 11.13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8.73mm / outer diameter 13.89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11.12mm / outer diameter 16.28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14.27mm / outer diameter 20.24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17.47mm / outer diameter 23.82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22.20mm / outer diameter 30.50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28.50mm / outer diameter 35.81mm
Reusable aluminium fitting with UNF thread (Dash system) and 360° rotational adjustment. This makes it possible to make up your own lines to individual requirements for numerous applications (oil, water, fuel, brake, clutch systems) and fit them without stress. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our stainless braided lines (or alternatively lines from other manufacturers with the same dimensions) can be used. The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5.56mm / outer diameter 11.13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8.73mm / outer diameter 13.89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11.12mm / outer diameter 16.28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14.27mm / outer diameter 20.24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17.47mm / outer diameter 23.82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22.20mm / outer diameter 30.50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28.50mm / outer diameter 35.81mm
Reusable aluminium fitting with UNF thread (Dash system) and 360° rotational adjustment. This makes it possible to make up your own lines to individual requirements for numerous applications (oil, water, fuel, brake, clutch systems) and fit them without stress. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our stainless braided lines (or alternatively lines from other manufacturers with the same dimensions) can be used. The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5.56mm / outer diameter 11.13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8.73mm / outer diameter 13.89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11.12mm / outer diameter 16.28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14.27mm / outer diameter 20.24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17.47mm / outer diameter 23.82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22.20mm / outer diameter 30.50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28.50mm / outer diameter 35.81mm
Reusable aluminium fitting with UNF thread (Dash system) and 360° rotational adjustment. This makes it possible to make up your own lines to individual requirements for numerous applications (oil, water, fuel, brake, clutch systems) and fit them without stress. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our stainless braided lines (or alternatively lines from other manufacturers with the same dimensions) can be used. The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5.56mm / outer diameter 11.13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8.73mm / outer diameter 13.89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11.12mm / outer diameter 16.28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14.27mm / outer diameter 20.24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17.47mm / outer diameter 23.82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22.20mm / outer diameter 30.50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28.50mm / outer diameter 35.81mm
Reusable aluminium fitting with UNF thread (Dash system) and 360° rotational adjustment. This makes it possible to make up your own lines to individual requirements for numerous applications (oil, water, fuel, brake, clutch systems) and fit them without stress. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our stainless braided lines (or alternatively lines from other manufacturers with the same dimensions) can be used. The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5.56mm / outer diameter 11.13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8.73mm / outer diameter 13.89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11.12mm / outer diameter 16.28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14.27mm / outer diameter 20.24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17.47mm / outer diameter 23.82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22.20mm / outer diameter 30.50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28.50mm / outer diameter 35.81mm