QSP Fuel Pressure Regulator AN10 Dash 10 High-Flow Silver

Price per metre Line type: braided hose, nylonSize: Dash 10Inner diameter: 14,2mmOuter diameter: 20,8mmMaterial: multi-layer (synthetic rubber liner, stainless steel middle layer, nylon outer braid)Colour: blackWorking pressure: 34 barBurst pressure: 138 barTemperature range: -40°C to 150°CApplication: lubricating oils, fuel (petrol, diesel, E85, ethanol, methanol), coolant Very light and flexible hose that can be used as an alternative to standard braided hoses. It connects to conventional hose barbs or via aluminium fittings on the Dash thread system.

Push-on fuel/oil hose made from reinforced synthetic rubber – AN4 to AN12 – price per metreThis reinforced fuel/oil hose made from high-quality synthetic rubber was specially developed for applications where easy installation, reliability and low weight are crucial. Thanks to the push-on system the hose can be installed particularly quickly and easily – simply push it onto the matching fitting.For this hose, special push-on fittings have been developed that are easy to fit and ensure a secure connection. For higher-temperature applications, we also recommend using a hose clamp at temperatures above 70 °C.Product features:High-quality reinforced synthetic rubber hosepush-on system for particularly quick and easy installationNo complex crimping requiredHigh flexibility and durable constructionWeight-reduced and ideal for performance applicationsSuitable for the following media:CoolantOilAirMethanolLubricantsFuels E85 and E10Technical data:Minimum bend radius: 63,5 mm (2,5")Recommendation: Use a hose clamp at temperatures above 70 °CSizes:Available immediately: AN4 – AN12Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines

BOOST products hydraulic hose Dash 10 - 90cm - black nylon Premium hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -10 AN / Dash 10 / 15,9mm Inner diameter: 14,29 mm Outer diameter: 20,38 mm Working pressure (max.): 34 bar Burst pressure: 138 bar Vacuum (max.): 0,68 bar Weight: 0,293 kg/m Bend radius (min.): 101,6 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

BOOST products hydraulic hose Dash 10 - 90cm - stainless steel Premium hydraulic hose with stainless steel braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -10 AN / Dash 10 / 15,9mm Inner diameter: 14,29 mm Outer diameter: 20,24 mm Working pressure (max.): 86 bar Burst pressure: 345 bar Vacuum (max.): 0,85 bar Weight: 0,334 kg/m Bend radius (min.): 101,6 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel outer braid. Colour: Silver (stainless steel) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

BOOST products high-flow PTFE swivel hose fitting Dash 10 - 45° - black Aluminium fitting PTFE AN / Dash 10 - 45degrees - swivel - max. flow for BOOST products PTFE hoses High-quality AN / Dash hydraulic hose end fitting for E85 fuel as well as oil and pneumatic systems Thread A: -10 AN / Dash 10 male Angle 45° Version: For BOOST products PTFE hydraulic hoses Material: Aluminium Colour: Black Note: High-flow fittings offer even better flow, making them ideal for oil and fuel lines. BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

BOOST products high-flow PTFE swivel hose fitting Dash 10 - 45° - silver Aluminium fitting PTFE AN / Dash 10 - 45degrees - swivel - max. flow for BOOST products PTFE hoses High-quality AN / Dash hydraulic hose end fitting for E85 fuel as well as oil and pneumatic systems Thread A: -10 AN / Dash 10 male Angle 45° Version: For BOOST products PTFE hydraulic hoses Material: Aluminium Colour: Silver Note: High-flow fittings offer even better flow, making them ideal for oil and fuel lines. BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

BOOST products PTFE hydraulic hose Dash 10 - 90cm - stainless steel High-quality PTFE hydraulic hose with stainless steel braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 PTFE hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products PTFE hydraulic fittings For BOOST products connections with thread size: Dash 10 / -10 AN / 7/8x14" Inner diameter: 12,70 mm Outer diameter: 15,80 mm Working pressure (max.): 100 bar Burst pressure: 410 bar Bend radius (min.): 240 mm Temperature (min.) -53°C Temperature (max.) 232°C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: PTFE with stainless steel outer braid Colour: Silver (stainless steel) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

Dash 10 / AN10 PTFE hydraulic hose, braided, nylon-covered, BLACK High-quality PTFE hydraulic hose in black High-quality PTFE oil, water and fuel lines Note: the sealing olive must be replaced every time a PTFE fitting is dismantled! Otherwise leaks may occur! Price per metre. Line type: braided PTFE hoseSize: Dash 10Inner diameter: 12,95mmOuter diameter: 16,00mmMaterial: multi-layer (Teflon inner liner, stainless steel braid, nylon cover)Colour: blackWorking pressure: 206 barBurst pressure: 689 barTemperature range: -70°C to 250°CApplication: lubricating oils, fuel (petrol, diesel, E85, ethanol, methanol), coolant, hydraulic oils, nitro  

Reinforced fuel/oil hose made from synthetic rubber with stainless steel core & nylon braid – AN4 to AN20 – price per metreThis high-quality, reinforced fuel and oil hose was specially developed for applications where high performance, reliability and low weight are crucial. Ideally suited for motorsport, vehicle building, industry and many other technical applications.The hose features a flexible stainless steel inner core, which is embedded in a synthetic chlorinated polyethylene inner layer . This achieves particularly high stability and pressure resistance. The braided nylon outer sheath additionally protects against abrasion, wear and external influences while also providing weight reduction in the vehicle.Thanks to its special construction, this hose is compatible with various fitting types. Both connections with cutting ring (cutting edge) and connections without cutting ring can be used.Product features:Reinforced high-performance hose for fuel and oilFlexible stainless steel inner core for maximum stabilitySynthetic inner lining (CPE) for high resistanceBraided nylon outer sheath for protection against abrasion and wearReduced weight compared with conventional steel-braided hosesHigh flexibility and long service lifeSuitable for the following media:CoolantOilAirMethanolLubricantsE85 fuelVacuum applicationsTechnical data:Minimum bend radius: 63,5 mm (2,5")Sizes:Available immediately: AN4 – AN20Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines

Fuel/oil hose made from reinforced synthetic rubber with double stainless steel braid – AN4 to AN20 – price per metreHigh-quality Fuel and oil hose with double stainless steel braid, developed for demanding applications in motorsport, vehicle building and industry. The robust construction ensures high pressure resistance, long service life and optimum protection against abrasion and corrosion.The hose consists of a reinforced synthetic rubber inner core, which is sheathed in a double stainless steel braid . This construction provides additional stability as well as protection against external influences and mechanical stress.Thanks to its special design, this hose is compatible with a wide range of fittings. Both connections with cutting ring (cutting edge) and connections without cutting ring can be used without any problems.Product features:High-quality Fuel/oil hose with double stainless steel braidReinforced synthetic rubber inner coreHigh resistance to abrasion and corrosionVery durable and pressure resistantSuitable for various connection typesSuitable for the following media:CoolantOilAirMethanolLubricantsE85 fuelVacuum applicationsTechnical data:Minimum bend radius: 63,5 mm (2,5")Sizes:Available immediately: AN4 – AN20Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines

BOOST products PTFE hydraulic hose Dash 10 - 90cm - black nylon High-quality PTFE hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 PTFE hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products PTFE hydraulic fittings For BOOST products connections with thread size: Dash 10 / -10 AN / 7/8x14" Inner diameter: 12,70 mm Outer diameter: 17,30 mm Working pressure (max.): 100 bar Burst pressure: 410 bar Bend radius (min.): 240 mm Temperature (min.) -53°C Temperature (max.) 232°C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: PTFE with nylon outer braid Colour:Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

Lightweight PTFE fuel/oil hose with stainless steel braid – AN3 to AN10 – price per metreHigh-quality High-performance fuel/oil hose with PTFE inner tube and stainless steel braid, developed for demanding applications in motorsport, vehicle construction and industry.The hose features a flexible PTFE (Teflon) inner tube with a particularly smooth surface that enables optimum flow. The braided stainless steel outer sheath ensures high stability, pressure resistance and protection against abrasion and external influences.Optionally, the hose is also available with a additional protective coating , which protects the stainless steel braid and increases service life. Available variants:Black coatingTransparent coatingThe hose is specially designed for use with PTFE fittings developed.Available fittings:Aluminium fittings: Straight, 45°, 90°, 120°, 150°, 180°Colours: Blue/red or black⚠️ Note: The use of hose clamps are not recommended with this hose.Product features:PTFE (Teflon) inner tube for optimum flowBraided stainless steel outer braidOptionally with black or clear protective coatingVery durable and pressure resistantHigh flexibilitySuitable for the following media:Brake fluidClutch fluidFuels (including E85)oil linesSizes:Standard availability: AN3 – AN10Coated version: AN3 – AN8 (-08)Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines

Product description This listing is for a Facet fuel pressure regulator with 8 mm connection. Product details Manufacturer Facet Item: fuel pressure regulator Connection: 8 mm Adjustment range: 1 to 5 bar Suitable for fuel-injected vehicles Packaging unit 1 piece Description Facet fuel pressure regulator for regulating fuel pressure in fuel-injected vehicles. The regulator has 8 mm connections and is adjustable from 1 to 5 bar. Scope of delivery 1x Facet fuel pressure regulator 8 mm

Product description This listing is for a Facet fuel pressure regulator with 8 mm hose barb for fuel-injected vehicles. Product details Manufacturer Facet Item: fuel pressure regulator Version: single diaphragm 1:1 Connection: 8 mm hose barb Adjustment range: 1 to 5 bar Suitable for fuel-injected vehicles Packaging unit 1 piece Suitable for Modified engines Motorsport engines Fuel-injected vehicles Conversion and project vehicles Description Facet fuel pressure regulator with 8 mm hose barb for regulating fuel pressure on fuel-injected vehicles. This is a single diaphragm 1:1 fuel pressure regulator designed for modified vehicles and motorsport applications. The regulator works with the typical fuel enrichment also used in standard fuel pressure regulators. The pressure is adjustable in the range of 1 to 5 bar. Scope of delivery 1x Facet fuel pressure regulator 8 mm hose barb

Product description This listing is for a Facet fuel pressure regulator with AN6 / Dash 6 connection for fuel-injected vehicles. Product details Manufacturer Facet Item: fuel pressure regulator Version: single diaphragm 1:1 Connection: AN6 / Dash 6 Adjustment range: 1 to 5 bar Suitable for fuel-injected vehicles Packaging unit 1 piece Suitable for Modified engines Motorsport engines Fuel-injected vehicles Conversion and project vehicles Description Facet fuel pressure regulator with AN6 / Dash 6 connection for regulating fuel pressure in fuel-injected vehicles. It is a single-diaphragm 1:1 fuel pressure regulator designed for modified vehicles and motorsport applications. The regulator works with the typical fuel enrichment also used in standard fuel pressure regulators. The pressure is adjustable in the range of 1 to 5 bar. Scope of delivery 1x Facet fuel pressure regulator AN6 / Dash 6

Product description This listing is for a Malpassi Filter King FPR004 fuel filter with integrated fuel pressure regulator and glass bowl. Product details Manufacturer Malpassi Item Fuel filter / fuel pressure regulator Model Filter King 67 mm Version with glass bowl Filter rating 10 micron Pressure range adjustable 1 to 5 PSI / 0.1 to 0.35 bar Maximum inlet pressure 10 PSI / 0.7 bar Connection for 6 mm and 8 mm fuel hoses Width 100 mm Height 120 mm Weight approx. 370 g Suitable for Engines up to approx. 150 hp Electric fuel pumps Carburettor fuel systems Motorsport Classic cars Conversion and custom projects Equipment With glass bowl for visual inspection With replaceable filter element Including mounting bracket Including screws Including English fitting instructions Description The Malpassi Filter King FPR004 combines a fuel filter and fuel pressure regulator in a single component. The glass bowl allows quick visual inspection of the filter element and gives the regulator a classic look. Thanks to its precise pressure regulation, the Filter King is particularly suitable for use with electric fuel pumps and helps to prevent flooding float chambers. The adjustable pressure range of 1 to 5 PSI makes it highly versatile. Scope of delivery 1x Malpassi Filter King 67 mm FPR004 1x mounting bracket Mounting screws 1x English fitting instructions

Product description This listing is for a genuine Malpassi Filter King FPR005 fuel filter with integrated fuel pressure regulator and metal bowl. Product details Manufacturer Malpassi Item Fuel filter / fuel pressure regulator Model Filter King 67 mm Version with metal bowl / alloy bowl Colour grey Filter rating 10 micron Pressure range adjustable 1 to 7 PSI Connections: 8 mm push-on 1x inlet 8 mm 1x outlet 8 mm Width 100 mm Height: 125 mm Weight approx. 370 g Compatible with E10 Suitable for Carburettor applications Naturally aspirated engines with carburettors Single Weber DCOE Single carburettor set-ups Motorsport Classic cars Conversion and custom projects Equipment With paper filter element With metal bowl With steel mounting bracket Including mounting hardware Description The Malpassi Filter King FPR005 combines fuel filter and fuel pressure regulator in one unit. The 67 mm version is the smaller variant and is often used with single Weber DCOE carburettors and other single carburettor set-ups. The regulator filters and regulates the fuel pressure without unnecessarily restricting fuel flow. Fine adjustment is made via the adjusting screw on the top after removing the cap nut. Scope of delivery 1x Malpassi Filter King FPR005 1x steel mounting bracket Mounting hardware

Product description This listing is for a genuine Malpassi Filter King FPR006 fuel filter with integrated fuel pressure regulator and glass bowl. Product details Manufacturer Malpassi Item Fuel filter / fuel pressure regulator Model Filter King 85 mm Version with glass bowl Colour grey Filter rating 10 micron Pressure range adjustable 1.5 to 7 PSI Connections 8 mm hose barb 1x inlet 8 mm 1x outlet 8 mm Length 105 mm Width 116 mm Height 130 mm Weight approx. 370 g Compatible with E85 Suitable for Carburettor applications Naturally aspirated engines with carburettors Motorsport Classic cars Conversion and custom projects Equipment With paper filter element With glass bowl With bracket Including mounting screws Description The Malpassi Filter King FPR006 combines a fuel filter and fuel pressure regulator in a single component. It was specially developed to improve the fuel supply of carburettor engines and to ensure an even, constant fuel flow. The regulator reduces and stabilises the fuel pressure, which can prevent problems such as flooding, stalling, fuel starvation or unnecessary fuel consumption. Thanks to its precise pressure regulation, the Filter King is particularly suitable for performance carburettor set-ups. Scope of delivery 1x Malpassi Filter King FPR006 1x bracket Mounting screws

Product description This listing is for a genuine Malpassi Filter King FPR007 fuel filter with integrated fuel pressure regulator and metal bowl. Product details Manufacturer Malpassi Item Fuel filter / fuel pressure regulator Model Filter King 85 mm Version with metal bowl / alloy bowl Colour grey Filter rating 10 micron Pressure range adjustable 1.5 to 7 PSI Connections 8 mm hose barb 1x inlet 8 mm 1x outlet 8 mm Length 105 mm Width 116 mm Height 130 mm Weight approx. 370 g Compatible with E85 Suitable for Carburettor applications Naturally aspirated engines with carburettors Motorsport Classic cars Conversion and custom projects Equipment With paper filter element With metal bowl With bracket Including mounting screws Description The Malpassi Filter King FPR007 combines a fuel filter and fuel pressure regulator in one unit. It was specially developed to improve the fuel supply of carburetted engines and to ensure an even, constant fuel flow. The regulator reduces and stabilises the fuel pressure, which can prevent problems such as flooding, stalling, fuel starvation or unnecessary fuel consumption. Thanks to its precise pressure regulation, the Filter King is particularly suitable for performance carburettor set-ups. Scope of delivery 1x Malpassi Filter King FPR007 1x bracket Mounting screws

Product description This listing is for a Malpassi Filter King FPRV8 fuel pressure regulator, V8 version. Product details Manufacturer Malpassi Item: fuel pressure regulator Model: FPRV8 Version: V8 High Flow Competition Valve Connection: 1/8 NPT Hose barbs 8 mm Pressure range: 1.5 to 7 psi Filter material: pleated paper Filter rating 10 micron Dimensions: approx. 130 x 116 mm Weight approx. 370 g Corrosion-resistant finish Description Malpassi Filter King FPRV8 fuel pressure regulator for high flow rates at moderate pressure. The regulator has a corrosion-resistant finish and the external components are made of metal. Thanks to the integrated filter, the pressure regulator is ideal for performance fuel systems, motorsport, carburettor and conversion projects. Scope of delivery 1x Malpassi Filter King FPRV8 fuel pressure regulator

Product description This listing is for a Malpassi Petrol King FPR008B fuel pressure regulator for carburettor fuel systems. Product details Manufacturer Malpassi Item: fuel pressure regulator Model: Petrol King Version: FPR008B Maximum inlet pressure: 8 PSI Adjustment range: 1.5 to 5 PSI Connections: 8 mm push-on Width including bracket: 83 mm Height: 60 mm Weight: approx. 165 g Suitable for Carburettor fuel systems Petrol E10 E85 Diesel Motorsport Classic cars Conversion and custom projects Description The Malpassi Petrol King FPR008B fuel pressure regulator was developed to improve the fuel supply of carburetted engines. Thanks to precise pressure regulation, the regulator ensures an even and constant fuel flow under varying driving and ambient conditions. The regulator reduces excessive pump pressure, helping to avoid problems such as flooding, stalling, fuel starvation or unnecessary fuel consumption. This can result in a smooth idle, quick engine starting and an even fuel supply. Scope of delivery 1x Malpassi Petrol King FPR008B fuel pressure regulator

Product description This listing is for a QSP fuel pressure adapter made of solid aluminium with 10 mm hose barbs. Product details Manufacturer QSP Products Item Fuel pressure adapter / Fuel Pressure Connection Material Aluminium Colour black Hose barbs 10 mm Pressure gauge port 1/8 NPT Packaging unit 1 piece Equipment With hose clamps Made from solid aluminium Description QSP fuel pressure adapter for fitting between the fuel lines. A suitable pressure gauge can be fitted to the 1/8 NPT port to read the fuel pressure. The adapter has 10 mm hose barbs and is ideal for motorsport, conversion and project vehicles. Scope of delivery 1x QSP fuel pressure adapter 10 mm black Hose clamps

Product description This listing is for a QSP fuel pressure adapter made of solid aluminium with 10 mm hose barbs. Product details Manufacturer QSP Products Item Fuel pressure adapter / Fuel Pressure Connection Material Aluminium Colour silver Hose barbs 10 mm Pressure gauge port 1/8 NPT Packaging unit 1 piece Equipment With hose clamps Made from solid aluminium Description QSP fuel pressure adapter for fitting between the fuel lines. A suitable pressure gauge can be fitted to the 1/8 NPT port to read the fuel pressure. The adapter has 10 mm hose barbs and is ideal for motorsport, conversion and project vehicles. Scope of delivery 1x QSP fuel pressure adapter 10 mm silver Hose clamps

Product description This listing is for a QSP fuel pressure adapter made of solid aluminium with 8 mm hose barbs. Product details Manufacturer QSP Products Item Fuel pressure adapter / Fuel Pressure Connection Material Aluminium Colour black Hose barbs 8 mm Pressure gauge port 1/8 NPT Packaging unit 1 piece Equipment With hose clamps Made from solid aluminium Description QSP fuel pressure adapter for fitting between the fuel lines. A suitable pressure gauge can be mounted via the 1/8 NPT port to read the fuel pressure. The adapter is equipped with 8 mm hose barbs and is ideal for motorsport, conversion and project vehicles. Scope of delivery 1x QSP fuel pressure adapter 8 mm black Hose clamps