QSP Fuel/Oil Hose Nylon Braided AN12 Dash 12 (17,4mm) - p/m1
€40.22
Available, delivery time: 3 - 4 days
Product information "QSP Fuel/Oil Hose Nylon Braided AN12 Dash 12 (17,4mm) - p/m1"
Reinforced fuel/oil hose made from synthetic rubber with stainless steel core & nylon braid – AN4 to AN20 – price per metre
This high-quality, reinforced fuel and oil hose was specially developed for applications where high performance, reliability and low weight are crucial. Ideally suited for motorsport, vehicle building, industry and many other technical applications.
The hose features a flexible stainless steel inner core, which is embedded in a synthetic chlorinated polyethylene inner layer . This achieves particularly high stability and pressure resistance. The braided nylon outer sheath additionally protects against abrasion, wear and external influences while also providing weight reduction in the vehicle.
Thanks to its special construction, this hose is compatible with various fitting types. Both connections with cutting ring (cutting edge) and connections without cutting ring can be used.
Product features:
Reinforced high-performance hose for fuel and oil
Flexible stainless steel inner core for maximum stability
Synthetic inner lining (CPE) for high resistance
Braided nylon outer sheath for protection against abrasion and wear
Reduced weight compared with conventional steel-braided hoses
High flexibility and long service life
Suitable for the following media:
Coolant
Oil
Air
Methanol
Lubricants
E85 fuel
Vacuum applications
Technical data:
Minimum bend radius: 63,5 mm (2,5")
Sizes:
Available immediately: AN4 – AN20
Pricing:
The stated price applies per metre.
Example: if you would like to order 3 metres please enter quantity 3 .
Applications:
Industry
Motorsport & racing
Vehicle tuning
Rally & off-road
Cars / trucks
Motorcycle
Agriculture & horticulture
Diesel and petrol engines
Turbo engines
| Brand: | QSP |
|---|---|
| Colour: | Black |
| Connection: | 1 1/16-12 UNF, Dash 12 |
| Hose Type: | Nylon Braided, Rubber Core Hose |
Manufacturer:
Matching fittings (Dash 12)
Aluminium tube sleeve AN12 – 24,7 x 19,2 mm – black. This sleeve is intended for use with matching union nuts and aluminium tubes in the AN12 system. Suitable for use with nut QG818-.. or QGZ818-.. and the aluminium tube with part number QGTUBE…. The sleeve provides a secure connection of the tube within the corresponding system. Product features: Size: AN12 Dimensions: 24,7 x 19,2 mm Colour: black Material: aluminium For use with QG818-.. / QGZ818-.. nuts Fits aluminium pipe QGTUBE… Suitable for oil, fuel or hydraulic applications, depending on the respective system design.
Aluminium tube sleeve AN12 – 24,7 x 19,2 mm. This sleeve is intended for use with matching union nuts and aluminium tubes in the AN12 system. Suitable for use with nut QG818-.. or QGZ818-.. and the aluminium tube with part number QGTUBE…. The sleeve provides a secure connection of the tube within the corresponding system. Product features: Size: AN12 Dimensions: 24,7 x 19,2 mm Material: aluminium For use with QG818-.. / QGZ818-.. nuts Fits aluminium pipe QGTUBE… Suitable for oil, fuel or hydraulic applications, depending on the respective system design.
Item description For sale is a new QSP crimp sleeve / shrink sleeve in Dash 12 / AN12. Product details Manufacturer: QSP Products Item: QSP shrink sleeve / crimp sleeve Size Dash 12 / AN12 Material: aluminium Thread type AN / Dash / JIC / UNF Thread: none Type: other Swivel: no Cutter style: no Packaging unit: 1 pieces Condition: new Suitable for Fuel lines Oil lines Hoses with stainless steel braid and rubber core Hoses with nylon braid and rubber core Description QSP aluminium crimp sleeve or shrink sleeve in AN12 / Dash 12. The sleeve is designed for matching AN hoses and fittings and is suitable for fuel and oil lines. Scope of delivery 1x QSP crimp sleeve Dash 12 / AN12
Aluminium fitting black AN12 Dash 12 straight Reusable aluminium hose end with UNF thread (Dash system) and 360° swivel. This allows you to make up your own lines to suit individual needs and numerous applications (oil, water, fuel, brake and clutch systems) and install them stress-free. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our braided lines can be used (alternatively, lines from other manufacturers with the same dimensions). The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5,56mm / outer diameter 11,13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8,73mm / outer diameter 13,89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11,12mm / outer diameter 16,28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14,27mm / outer diameter 20,24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17,47mm / outer diameter 23,82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22,20mm / outer diameter 30,50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28,50mm / outer diameter 35,81mm
Aluminium tube nut AN12 – black. This nut is intended for use with matching aluminium tube sleeves and aluminium tubes in the AN12 system. Suitable for use with tube sleeve QG819-.. or QGZ819-.. and the aluminium tube with part number QGTUBE…. The nut is used to securely fasten the tube in the respective system. Product features: Size: AN12 Colour: black Material: aluminium For use with tube sleeve QG819-.. / QGZ819-.. Fits aluminium pipe QGTUBE… Suitable for oil, fuel or hydraulic applications, depending on the respective system design.
Aluminium tube nut AN12. This nut is intended for use with matching aluminium tube sleeves and aluminium tubes in the AN12 system. Suitable for use with tube sleeve QG819-.. or QGZ819-.. and the aluminium tube with part number QGTUBE…. The nut is used to securely fasten the tube in the respective system. Product features: Size: AN12 Material: aluminium For use with tube sleeve QG819-.. / QGZ819-.. Fits aluminium pipe QGTUBE… Robust design Suitable for oil, fuel or hydraulic applications, depending on the respective system design.
Reusable aluminium hose end with UNF thread (Dash system) and 360° swivel. This allows you to make up your own lines to suit individual needs and numerous applications (oil, water, fuel, brake and clutch systems) and install them stress-free. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our braided lines can be used (alternatively, lines from other manufacturers with the same dimensions). The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5,56mm / outer diameter 11,13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8,73mm / outer diameter 13,89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11,12mm / outer diameter 16,28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14,27mm / outer diameter 20,24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17,47mm / outer diameter 23,82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22,20mm / outer diameter 30,50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28,50mm / outer diameter 35,81mm
Reusable aluminium hose end with UNF thread (Dash system) and 360° swivel. This allows you to make up your own lines to suit individual needs and numerous applications (oil, water, fuel, brake and clutch systems) and install them stress-free. No additional seals are required! The technical design of the fitting is optimised for maximum flow and reduces turbulence and pressure losses. The fittings are manufactured on high-precision CNC machines and meet the highest quality standards. Our braided lines can be used (alternatively, lines from other manufacturers with the same dimensions). The system has been tried and tested in aviation and motorsport for over 40 years. Table - hose dimensions: Dash 4 ( 7/16 - 20 UNF ): inner diameter 5,56mm / outer diameter 11,13mmDash 6 ( 9/16 - 18 UNF ): inner diameter 8,73mm / outer diameter 13,89mmDash 8 ( 3/4 - 16 UNF ): inner diameter 11,12mm / outer diameter 16,28mmDash 10 ( 7/8 - 14 UNF ): inner diameter 14,27mm / outer diameter 20,24mmDash 12 ( 1/16 - 12 UNF ): inner diameter 17,47mm / outer diameter 23,82mmDash 16 ( 1-5/16 -12UNF ): inner diameter 22,20mm / outer diameter 30,50mmDash 20 ( 1 5/8 - 12 UNF ): inner diameter 28,50mm / outer diameter 35,81mm
High-quality straight aluminium push-on hose fitting, specially developed for use with push-on rubber hoses. When correctly fitted, this fitting ensures a secure, permanently tight connection without leaks. Installation is particularly easy, as the fitting is used directly with the intended reinforced push-on rubber hose. An additional hose clamp may be used depending on the application, but is not strictly necessary if the hose is correctly matched. Product features: Straight version Made from robust, lightweight aluminium Suitable for push-on rubber hoses Secure, leak-free connection when correctly installed High pressure and temperature resistance Available in sizes AN4 to AN12 Colours: blue/red anodised or black anodised In stock, available immediately Versatile use in industry, motorsport, racing, vehicle tuning, rally, off-road, trucks, motorcycles, agriculture and horticulture, as well as for diesel, petrol and turbo engines. Suitable for oil, fuel, water and air lines, depending on the respective hose specification.
High-quality straight aluminium push-on hose fitting, specially developed for use with push-on rubber hoses. When correctly fitted, this fitting provides a secure, permanently tight connection without leaks. Installation is particularly easy and is done in combination with the intended reinforced push-on rubber hose. An additional hose clamp is generally not required if the hose is correctly matched. Product features: Straight version Made from lightweight, robust aluminium Suitable for push-on rubber hoses High pressure and temperature resistance Available in sizes AN4 to AN12 Colours: blue/red anodised or black anodised Versatile use in industry, motorsport, vehicle construction and tuning, as well as for oil, fuel, water and air lines, depending on the respective hose specification.
BOOST products -12 AN / Dash 12 fitting / bung for oil catch tank - matt black Replacement fitting / spigot for the top outlet of BOOST products oil catch tanks High-quality threaded bung / fitting, suitable for catch tanks Replacement fitting / spigot for the top outlet of BOOST products oil catch tanks Material: Aluminium Thread:- 12 AN / Dash 12 Inner diameter: 21mm Overall height: 17,4mm Max. width: 31mm Colour: Matt black BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
Matching adapters (Dash 12)
BOOST products thread adapter Dash 12 male to NPT 3/4" male - matt black Aluminium adapter Dash 12 male thread to 3/4" NPT male thread in matt black High-quality AN / Dash to NPT thread adapter, suitable for E85 fuel as well as oil and pneumatic systems Thread A: -12 AN / Dash 12 male Thread B: 3/4" NPT male Material: Aluminium Colour: Matt black BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
BOOST products thread adapter Dash 12 male to NPT 1/2" male - matt black Aluminium adapter Dash 12 male thread to 1/2" NPT male thread in matt black High-quality AN / Dash to NPT thread adapter, suitable for E85 fuel as well as oil and pneumatic systems Thread A: -12 AN / Dash 12 male Thread B: 1/2" NPT male Material: Aluminium Colour: Matt black BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
BOOST products thread adapter Dash 12 male to NPT 1/2" male - matt silver Aluminium adapter Dash 12 male thread to 1/2" NPT male thread in matt silver High-quality AN / Dash to NPT thread adapter, suitable for E85 fuel as well as oil and pneumatic systems Thread A: -12 AN / Dash 12 male Thread B: 1/2" NPT male Material: Aluminium Colour: Matt silver BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
BOOST products thread adapter Dash 12 male to NPT 3/4" male - matt silver Aluminium adapter Dash 12 male thread to 3/4" NPT male thread in matt silver High-quality AN / Dash to NPT thread adapter, suitable for E85 fuel as well as oil and pneumatic systems Thread A: -12 AN / Dash 12 male Thread B: 3/4" NPT male Material: Aluminium Colour: Matt silver BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
BOOST products union Dash 12 male to Dash 12 male - matt black Threaded union with Dash 12 male thread in matt black For connecting Dash / AN female threads Thread A: -12 AN / Dash 12 / 1 1/16x12 male Thread B: -12 AN / Dash 12 / 1 1/16x12 male Material: Aluminium Colour: Matt black BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
For sale is a QSP aluminium adapter in male - male version from Dash / AN to metric thread, in black. QSP aluminium adapter in black. The adapter has a straight design and is suitable as a transition adapter from AN / Dash connections to metric connections. The adapter is suitable for fuel and oil applications as well as various motorsport, tuning and conversion projects.
For sale is a QSP aluminium adapter in a straight male version from Dash / AN to metric thread, in blue. QSP aluminium adapter in blue. The adapter has a straight design and is suitable as a transition adapter from AN / Dash connections to metric connections. The adapter is suitable for fuel and oil applications as well as various motorsport, tuning and conversion projects.
For sale is a QSP aluminium adapter in male - male version from Dash / AN to metric thread, in black. QSP aluminium adapter in black. The adapter has a straight design and is suitable as a transition adapter from AN / Dash connections to metric connections. The adapter is suitable for fuel and oil applications as well as various motorsport, tuning and conversion projects.
For sale is a QSP aluminium adapter in a straight male version from Dash / AN to metric thread, in blue. QSP aluminium adapter in blue. The adapter has a straight design and is suitable as a transition adapter from AN / Dash connections to metric connections. The adapter is suitable for fuel and oil applications as well as various motorsport, tuning and conversion projects.
For sale is a QSP aluminium adapter in a straight male version from Dash / AN to metric thread, in blue. QSP aluminium adapter in blue. The adapter has a straight design and is suitable as a transition adapter from AN / Dash connections to metric connections. The adapter is suitable for fuel and oil applications as well as various motorsport, tuning and conversion projects.
For sale is a QSP aluminium adapter in male - male version from Dash / AN to metric thread, in black. QSP aluminium adapter in black. The adapter has a straight design and is suitable as a transition adapter from AN / Dash connections to metric connections. The adapter is suitable for fuel and oil applications as well as various motorsport, tuning and conversion projects.
Similar products
BOOST products hydraulic hose Dash 10 - 1,8m - black nylon Premium hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 1,82m Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -10 AN / Dash 10 / 15,9mm Inner diameter: 14,29 mm Outer diameter: 20,38 mm Working pressure (max.): 34 bar Burst pressure: 138 bar Vacuum (max.): 0,68 bar Weight: 0,293 kg/m Bend radius (min.): 101,6 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
BOOST products hydraulic hose Dash 10 - 3m - black nylon Premium hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 3m Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -10 AN / Dash 10 / 15,9mm Inner diameter: 14,29 mm Outer diameter: 20,38 mm Working pressure (max.): 34 bar Burst pressure: 138 bar Vacuum (max.): 0,68 bar Weight: 0,293 kg/m Bend radius (min.): 101,6 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
BOOST products hydraulic hose Dash 10 - 6m - black nylon Premium hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 6m Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -10 AN / Dash 10 / 15,9mm Inner diameter: 14,29 mm Outer diameter: 20,38 mm Working pressure (max.): 34 bar Burst pressure: 138 bar Vacuum (max.): 0,68 bar Weight: 0,293 kg/m Bend radius (min.): 101,6 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
BOOST products hydraulic hose Dash 10 - 90cm - black nylon Premium hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -10 AN / Dash 10 / 15,9mm Inner diameter: 14,29 mm Outer diameter: 20,38 mm Working pressure (max.): 34 bar Burst pressure: 138 bar Vacuum (max.): 0,68 bar Weight: 0,293 kg/m Bend radius (min.): 101,6 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
BOOST products hydraulic hose Dash 12 - 3m - black nylon Premium hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -12 AN / Dash 12 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 3m Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -12 AN / Dash 12 / 11/16x12 / 19,1mm Inner diameter: 17,46 mm Outer diameter: 24,38 mm Working pressure (max.): 24 bar Burst pressure: 97 bar Vacuum (max.): 0,68 bar Weight: 0,372 kg/m Bend radius (min.): 114,3 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
BOOST products hydraulic hose Dash 12 - 90cm - black nylon Premium hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -12 AN / Dash 12 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -12 AN / Dash 12 / 11/16x12 / 19,1mm Inner diameter: 17,46 mm Outer diameter: 24,38 mm Working pressure (max.): 24 bar Burst pressure: 97 bar Vacuum (max.): 0,68 bar Weight: 0,372 kg/m Bend radius (min.): 114,3 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.
BOOST products hydraulic hose Dash 4 - 1.8m - black nylon Premium hydraulic hose with black nylon braiding, for E85 fuel as well as oil and pneumatic systems Flexible -04 AN / Dash 4 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 1,82m Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products fittings with thread size: -04 AN / Dash 4 / 7/16x20" Inner diameter: 5.56 mm Outer diameter: 11.17 mm Maximum working pressure: 34 bar Burst pressure: 138 bar Vacuum (max.): 0.68 bar Weight: 0.109 kg/m Bend radius (min.): 50.8 mm Temperature (min.) -40°C Temperature (max.) 125°C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.
BOOST products hydraulic hose Dash 4 - 3m - black nylon Premium hydraulic hose with black nylon braiding, for E85 fuel as well as oil and pneumatic systems Flexible -04 AN / Dash 4 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 3m Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products fittings with thread size: -04 AN / Dash 4 / 7/16x20" Inner diameter: 5.56 mm Outer diameter: 11.17 mm Maximum working pressure: 34 bar Burst pressure: 138 bar Vacuum (max.): 0.68 bar Weight: 0.109 kg/m Bend radius (min.): 50.8 mm Temperature (min.) -40°C Temperature (max.) 125°C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.
BOOST products hydraulic hose Dash 4 - 6m - black nylon Premium hydraulic hose with black nylon braiding, for E85 fuel as well as oil and pneumatic systems Flexible -04 AN / Dash 4 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 6m Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products fittings with thread size: -04 AN / Dash 4 / 7/16x20" Inner diameter: 5.56 mm Outer diameter: 11.17 mm Maximum working pressure: 34 bar Burst pressure: 138 bar Vacuum (max.): 0.68 bar Weight: 0.109 kg/m Bend radius (min.): 50.8 mm Temperature (min.) -40°C Temperature (max.) 125°C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.
BOOST products Hydraulic Hose Dash 4 - 90cm - Black Nylon Premium hydraulic hose with black nylon braiding, for E85 fuel as well as oil and pneumatic systems Flexible -04 AN / Dash 4 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products fittings with thread size: -04 AN / Dash 4 / 7/16x20" Inner diameter: 5.56 mm Outer diameter: 11.17 mm Maximum working pressure: 34 bar Burst pressure: 138 bar Vacuum (max.): 0.68 bar Weight: 0.109 kg/m Bend radius (min.): 50.8 mm Temperature (min.) -40°C Temperature (max.) 125°C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.
BOOST products hydraulic hose Dash 6 - 1.8m - black nylon Premium hydraulic hose with black nylon braiding, for E85 fuel as well as oil and pneumatic systems Flexible -06 AN / Dash 6 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 1,82m Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products fittings with thread size: -06 AN / Dash 6 / 9.5mm Inner diameter: 8.73 mm Outer diameter: 14.22 mm Working pressure (max.): 34 bar Burst pressure: 138 bar Vacuum (max.): 0.68 bar Weight: 0.132 kg/m Bend radius (min.): 63.5 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.
BOOST products hydraulic hose Dash 6 - 3m - black nylon Premium hydraulic hose with black nylon braiding, for E85 fuel as well as oil and pneumatic systems Flexible -06 AN / Dash 6 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 3m Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products fittings with thread size: -06 AN / Dash 6 / 9.5mm Inner diameter: 8.73 mm Outer diameter: 14.22 mm Working pressure (max.): 34 bar Burst pressure: 138 bar Vacuum (max.): 0.68 bar Weight: 0.132 kg/m Bend radius (min.): 63.5 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.