QSP Fuel Filter AN10 Dash 10 Male Blue 30 Micron

Price per metre Line type: braided hose, nylonSize: Dash 10Inner diameter: 14,2mmOuter diameter: 20,8mmMaterial: multi-layer (synthetic rubber liner, stainless steel middle layer, nylon outer braid)Colour: blackWorking pressure: 34 barBurst pressure: 138 barTemperature range: -40°C to 150°CApplication: lubricating oils, fuel (petrol, diesel, E85, ethanol, methanol), coolant Very light and flexible hose that can be used as an alternative to standard braided hoses. It connects to conventional hose barbs or via aluminium fittings on the Dash thread system.

Push-on fuel/oil hose made from reinforced synthetic rubber – AN4 to AN12 – price per metreThis reinforced fuel/oil hose made from high-quality synthetic rubber was specially developed for applications where easy installation, reliability and low weight are crucial. Thanks to the push-on system the hose can be installed particularly quickly and easily – simply push it onto the matching fitting.For this hose, special push-on fittings have been developed that are easy to fit and ensure a secure connection. For higher-temperature applications, we also recommend using a hose clamp at temperatures above 70 °C.Product features:High-quality reinforced synthetic rubber hosepush-on system for particularly quick and easy installationNo complex crimping requiredHigh flexibility and durable constructionWeight-reduced and ideal for performance applicationsSuitable for the following media:CoolantOilAirMethanolLubricantsFuels E85 and E10Technical data:Minimum bend radius: 63,5 mm (2,5")Recommendation: Use a hose clamp at temperatures above 70 °CSizes:Available immediately: AN4 – AN12Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines

BOOST products hydraulic hose Dash 10 - 90cm - black nylon Premium hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -10 AN / Dash 10 / 15,9mm Inner diameter: 14,29 mm Outer diameter: 20,38 mm Working pressure (max.): 34 bar Burst pressure: 138 bar Vacuum (max.): 0,68 bar Weight: 0,293 kg/m Bend radius (min.): 101,6 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

BOOST products hydraulic hose Dash 10 - 90cm - stainless steel Premium hydraulic hose with stainless steel braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -10 AN / Dash 10 / 15,9mm Inner diameter: 14,29 mm Outer diameter: 20,24 mm Working pressure (max.): 86 bar Burst pressure: 345 bar Vacuum (max.): 0,85 bar Weight: 0,334 kg/m Bend radius (min.): 101,6 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel outer braid. Colour: Silver (stainless steel) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

BOOST products high-flow PTFE swivel hose fitting Dash 10 - 45° - black Aluminium fitting PTFE AN / Dash 10 - 45degrees - swivel - max. flow for BOOST products PTFE hoses High-quality AN / Dash hydraulic hose end fitting for E85 fuel as well as oil and pneumatic systems Thread A: -10 AN / Dash 10 male Angle 45° Version: For BOOST products PTFE hydraulic hoses Material: Aluminium Colour: Black Note: High-flow fittings offer even better flow, making them ideal for oil and fuel lines. BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

BOOST products high-flow PTFE swivel hose fitting Dash 10 - 45° - silver Aluminium fitting PTFE AN / Dash 10 - 45degrees - swivel - max. flow for BOOST products PTFE hoses High-quality AN / Dash hydraulic hose end fitting for E85 fuel as well as oil and pneumatic systems Thread A: -10 AN / Dash 10 male Angle 45° Version: For BOOST products PTFE hydraulic hoses Material: Aluminium Colour: Silver Note: High-flow fittings offer even better flow, making them ideal for oil and fuel lines. BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

BOOST products PTFE hydraulic hose Dash 10 - 90cm - stainless steel High-quality PTFE hydraulic hose with stainless steel braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 PTFE hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products PTFE hydraulic fittings For BOOST products connections with thread size: Dash 10 / -10 AN / 7/8x14" Inner diameter: 12,70 mm Outer diameter: 15,80 mm Working pressure (max.): 100 bar Burst pressure: 410 bar Bend radius (min.): 240 mm Temperature (min.) -53°C Temperature (max.) 232°C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: PTFE with stainless steel outer braid Colour: Silver (stainless steel) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

Dash 10 / AN10 PTFE hydraulic hose, braided, nylon-covered, BLACK High-quality PTFE hydraulic hose in black High-quality PTFE oil, water and fuel lines Note: the sealing olive must be replaced every time a PTFE fitting is dismantled! Otherwise leaks may occur! Price per metre. Line type: braided PTFE hoseSize: Dash 10Inner diameter: 12,95mmOuter diameter: 16,00mmMaterial: multi-layer (Teflon inner liner, stainless steel braid, nylon cover)Colour: blackWorking pressure: 206 barBurst pressure: 689 barTemperature range: -70°C to 250°CApplication: lubricating oils, fuel (petrol, diesel, E85, ethanol, methanol), coolant, hydraulic oils, nitro  

Reinforced fuel/oil hose made from synthetic rubber with stainless steel core & nylon braid – AN4 to AN20 – price per metreThis high-quality, reinforced fuel and oil hose was specially developed for applications where high performance, reliability and low weight are crucial. Ideally suited for motorsport, vehicle building, industry and many other technical applications.The hose features a flexible stainless steel inner core, which is embedded in a synthetic chlorinated polyethylene inner layer . This achieves particularly high stability and pressure resistance. The braided nylon outer sheath additionally protects against abrasion, wear and external influences while also providing weight reduction in the vehicle.Thanks to its special construction, this hose is compatible with various fitting types. Both connections with cutting ring (cutting edge) and connections without cutting ring can be used.Product features:Reinforced high-performance hose for fuel and oilFlexible stainless steel inner core for maximum stabilitySynthetic inner lining (CPE) for high resistanceBraided nylon outer sheath for protection against abrasion and wearReduced weight compared with conventional steel-braided hosesHigh flexibility and long service lifeSuitable for the following media:CoolantOilAirMethanolLubricantsE85 fuelVacuum applicationsTechnical data:Minimum bend radius: 63,5 mm (2,5")Sizes:Available immediately: AN4 – AN20Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines

Fuel/oil hose made from reinforced synthetic rubber with double stainless steel braid – AN4 to AN20 – price per metreHigh-quality Fuel and oil hose with double stainless steel braid, developed for demanding applications in motorsport, vehicle building and industry. The robust construction ensures high pressure resistance, long service life and optimum protection against abrasion and corrosion.The hose consists of a reinforced synthetic rubber inner core, which is sheathed in a double stainless steel braid . This construction provides additional stability as well as protection against external influences and mechanical stress.Thanks to its special design, this hose is compatible with a wide range of fittings. Both connections with cutting ring (cutting edge) and connections without cutting ring can be used without any problems.Product features:High-quality Fuel/oil hose with double stainless steel braidReinforced synthetic rubber inner coreHigh resistance to abrasion and corrosionVery durable and pressure resistantSuitable for various connection typesSuitable for the following media:CoolantOilAirMethanolLubricantsE85 fuelVacuum applicationsTechnical data:Minimum bend radius: 63,5 mm (2,5")Sizes:Available immediately: AN4 – AN20Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines

BOOST products PTFE hydraulic hose Dash 10 - 90cm - black nylon High-quality PTFE hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 PTFE hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products PTFE hydraulic fittings For BOOST products connections with thread size: Dash 10 / -10 AN / 7/8x14" Inner diameter: 12,70 mm Outer diameter: 17,30 mm Working pressure (max.): 100 bar Burst pressure: 410 bar Bend radius (min.): 240 mm Temperature (min.) -53°C Temperature (max.) 232°C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: PTFE with nylon outer braid Colour:Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

Lightweight PTFE fuel/oil hose with stainless steel braid – AN3 to AN10 – price per metreHigh-quality High-performance fuel/oil hose with PTFE inner tube and stainless steel braid, developed for demanding applications in motorsport, vehicle construction and industry.The hose features a flexible PTFE (Teflon) inner tube with a particularly smooth surface that enables optimum flow. The braided stainless steel outer sheath ensures high stability, pressure resistance and protection against abrasion and external influences.Optionally, the hose is also available with a additional protective coating , which protects the stainless steel braid and increases service life. Available variants:Black coatingTransparent coatingThe hose is specially designed for use with PTFE fittings developed.Available fittings:Aluminium fittings: Straight, 45°, 90°, 120°, 150°, 180°Colours: Blue/red or black⚠️ Note: The use of hose clamps are not recommended with this hose.Product features:PTFE (Teflon) inner tube for optimum flowBraided stainless steel outer braidOptionally with black or clear protective coatingVery durable and pressure resistantHigh flexibilitySuitable for the following media:Brake fluidClutch fluidFuels (including E85)oil linesSizes:Standard availability: AN3 – AN10Coated version: AN3 – AN8 (-08)Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines

Product description This listing is for a Malpassi Filter King FPR004 fuel filter with integrated fuel pressure regulator and glass bowl. Product details Manufacturer Malpassi Item Fuel filter / fuel pressure regulator Model Filter King 67 mm Version with glass bowl Filter rating 10 micron Pressure range adjustable 1 to 5 PSI / 0.1 to 0.35 bar Maximum inlet pressure 10 PSI / 0.7 bar Connection for 6 mm and 8 mm fuel hoses Width 100 mm Height 120 mm Weight approx. 370 g Suitable for Engines up to approx. 150 hp Electric fuel pumps Carburettor fuel systems Motorsport Classic cars Conversion and custom projects Equipment With glass bowl for visual inspection With replaceable filter element Including mounting bracket Including screws Including English fitting instructions Description The Malpassi Filter King FPR004 combines a fuel filter and fuel pressure regulator in a single component. The glass bowl allows quick visual inspection of the filter element and gives the regulator a classic look. Thanks to its precise pressure regulation, the Filter King is particularly suitable for use with electric fuel pumps and helps to prevent flooding float chambers. The adjustable pressure range of 1 to 5 PSI makes it highly versatile. Scope of delivery 1x Malpassi Filter King 67 mm FPR004 1x mounting bracket Mounting screws 1x English fitting instructions

Product description This listing is for a genuine Malpassi Filter King FPR005 fuel filter with integrated fuel pressure regulator and metal bowl. Product details Manufacturer Malpassi Item Fuel filter / fuel pressure regulator Model Filter King 67 mm Version with metal bowl / alloy bowl Colour grey Filter rating 10 micron Pressure range adjustable 1 to 7 PSI Connections: 8 mm push-on 1x inlet 8 mm 1x outlet 8 mm Width 100 mm Height: 125 mm Weight approx. 370 g Compatible with E10 Suitable for Carburettor applications Naturally aspirated engines with carburettors Single Weber DCOE Single carburettor set-ups Motorsport Classic cars Conversion and custom projects Equipment With paper filter element With metal bowl With steel mounting bracket Including mounting hardware Description The Malpassi Filter King FPR005 combines fuel filter and fuel pressure regulator in one unit. The 67 mm version is the smaller variant and is often used with single Weber DCOE carburettors and other single carburettor set-ups. The regulator filters and regulates the fuel pressure without unnecessarily restricting fuel flow. Fine adjustment is made via the adjusting screw on the top after removing the cap nut. Scope of delivery 1x Malpassi Filter King FPR005 1x steel mounting bracket Mounting hardware

Product description This listing is for a genuine Malpassi Filter King FPR006 fuel filter with integrated fuel pressure regulator and glass bowl. Product details Manufacturer Malpassi Item Fuel filter / fuel pressure regulator Model Filter King 85 mm Version with glass bowl Colour grey Filter rating 10 micron Pressure range adjustable 1.5 to 7 PSI Connections 8 mm hose barb 1x inlet 8 mm 1x outlet 8 mm Length 105 mm Width 116 mm Height 130 mm Weight approx. 370 g Compatible with E85 Suitable for Carburettor applications Naturally aspirated engines with carburettors Motorsport Classic cars Conversion and custom projects Equipment With paper filter element With glass bowl With bracket Including mounting screws Description The Malpassi Filter King FPR006 combines a fuel filter and fuel pressure regulator in a single component. It was specially developed to improve the fuel supply of carburettor engines and to ensure an even, constant fuel flow. The regulator reduces and stabilises the fuel pressure, which can prevent problems such as flooding, stalling, fuel starvation or unnecessary fuel consumption. Thanks to its precise pressure regulation, the Filter King is particularly suitable for performance carburettor set-ups. Scope of delivery 1x Malpassi Filter King FPR006 1x bracket Mounting screws

Product description This listing is for a genuine Malpassi Filter King FPR007 fuel filter with integrated fuel pressure regulator and metal bowl. Product details Manufacturer Malpassi Item Fuel filter / fuel pressure regulator Model Filter King 85 mm Version with metal bowl / alloy bowl Colour grey Filter rating 10 micron Pressure range adjustable 1.5 to 7 PSI Connections 8 mm hose barb 1x inlet 8 mm 1x outlet 8 mm Length 105 mm Width 116 mm Height 130 mm Weight approx. 370 g Compatible with E85 Suitable for Carburettor applications Naturally aspirated engines with carburettors Motorsport Classic cars Conversion and custom projects Equipment With paper filter element With metal bowl With bracket Including mounting screws Description The Malpassi Filter King FPR007 combines a fuel filter and fuel pressure regulator in one unit. It was specially developed to improve the fuel supply of carburetted engines and to ensure an even, constant fuel flow. The regulator reduces and stabilises the fuel pressure, which can prevent problems such as flooding, stalling, fuel starvation or unnecessary fuel consumption. Thanks to its precise pressure regulation, the Filter King is particularly suitable for performance carburettor set-ups. Scope of delivery 1x Malpassi Filter King FPR007 1x bracket Mounting screws

Product description This listing is for a Malpassi replacement paper filter element to fit FPR004 and FPR005 Filter King models. Product details Manufacturer Malpassi Item Replacement fuel filter / paper filter element Material Paper Length: 42 mm Outside diameter: 42 mm Inner diameter 18 mm Packaging unit 1 piece Suitable for Malpassi FPR004 Filter King Malpassi FPR005 Filter King Description Malpassi paper filter element as a replacement filter for FPR004 and FPR005 Filter King fuel filters / fuel pressure regulators. The filter element is ideal for servicing or replacing a dirty or worn filter. Scope of delivery 1x Malpassi paper filter element

Product description This listing is for a Malpassi paper replacement filter element suitable for FPR006, FPR007 and FPRV8 Filter King models. Product details Manufacturer Malpassi Item Replacement fuel filter / paper filter element Material Paper Filter rating 8 micron Length 50 mm Outer diameter 48 mm Inner diameter 18 mm Packaging unit 1 piece Suitable for Malpassi FPR006 Filter King Malpassi FPR007 Filter King Malpassi FPRV8 Filter King Description Malpassi paper filter element as a replacement filter for FPR006, FPR007 and FPRV8 Filter King fuel filters / fuel pressure regulators. The filter element is ideal for servicing or replacing a dirty or worn filter. Scope of delivery 1x Malpassi paper filter element

Item description For sale is a QSP aluminium adapter for in-tank fuel filters. Product details Manufacturer: QSP Products Item: adapter for in-tank filter Material: aluminium Thread M18x1,5 Version for Bosch 044 pump Packaging unit: 1 pieces Suitable for Bosch 044 fuel pump QSP QP Filter404 QSP QCATCH 404 catch tank Description QSP aluminium adapter for using an in-tank filter with the Bosch 044 fuel pump. The adapter fits the QSP QP Filter404 and can be used in combination with the QCATCH 404 catch tank. Scope of delivery 1x QSP adapter for in-tank filter Bosch 044 M18x1,5

Item description For sale is a QSP aluminium adapter for in-tank fuel filters. Product details Manufacturer: QSP Products Item: adapter for in-tank filter Material: aluminium Thread M14x1,5 Version for QSP 404 pump Packaging unit: 1 pieces Suitable for QSP 404 fuel pump QSP QP Filter404 QSP QCATCH 404 catch tank Description QSP aluminium adapter for using an in-tank filter with the QSP 404 fuel pump. The adapter fits the QSP QP Filter404 and can be used in combination with the QCATCH 404 catch tank. Scope of delivery 1x QSP adapter for in-tank filter QSP 404 M14x1,5

Product description This listing is for a robust QSP aluminium fuel filter in black. Product details Manufacturer QSP Products Item Fuel filter Material Aluminium Colour black Hose barb 12 mm Filter rating 30 micron Overall length 115 mm Filter length 65 mm Packaging unit 1 piece Description QSP aluminium fuel filter with 12 mm hose barb. The filter is robustly built and ideal for fuel systems in motorsport, conversion and project vehicles. Scope of delivery 1x QSP fuel filter 12 mm black

Product description This listing is for a robust QSP aluminium fuel filter in blue. Product details Manufacturer QSP Products Item Fuel filter Material Aluminium Colour blue Hose barb 12 mm Filter rating 30 micron Overall length 115 mm Filter length 65 mm Packaging unit 1 piece Description QSP aluminium fuel filter with 12 mm hose barb. The filter is robustly built and ideal for fuel systems in motorsport, conversion and project vehicles. Scope of delivery 1x QSP fuel filter 12 mm blue

Product description This listing is for a robust QSP aluminium fuel filter in black. Product details Manufacturer QSP Products Item Fuel filter Material Aluminium Colour black Hose barb 15 mm Filter rating 30 micron Overall length 120 mm Filter length 65 mm Packaging unit 1 piece Description QSP aluminium fuel filter with 15 mm hose barb. The filter is robustly built and ideal for fuel systems in motorsport, conversion and project vehicles. Scope of delivery 1x QSP fuel filter 15 mm black

Product description This listing is for a robust QSP aluminium fuel filter in blue. Product details Manufacturer QSP Products Item Fuel filter Material Aluminium Colour blue Hose barb 15 mm Filter rating 30 micron Overall length 120 mm Filter length 65 mm Packaging unit 1 piece Description QSP aluminium fuel filter with 15 mm hose barb. The filter is robustly built and ideal for fuel systems in motorsport, conversion and project vehicles. Scope of delivery 1x QSP fuel filter 15 mm blue