QSP Expander Female / Male AN10 Dash 10 - AN12 Dash 12

Price per metre Line type: braided hose, nylonSize: Dash 10Inner diameter: 14,2mmOuter diameter: 20,8mmMaterial: multi-layer (synthetic rubber liner, stainless steel middle layer, nylon outer braid)Colour: blackWorking pressure: 34 barBurst pressure: 138 barTemperature range: -40°C to 150°CApplication: lubricating oils, fuel (petrol, diesel, E85, ethanol, methanol), coolant Very light and flexible hose that can be used as an alternative to standard braided hoses. It connects to conventional hose barbs or via aluminium fittings on the Dash thread system.

Push-on fuel/oil hose made from reinforced synthetic rubber – AN4 to AN12 – price per metreThis reinforced fuel/oil hose made from high-quality synthetic rubber was specially developed for applications where easy installation, reliability and low weight are crucial. Thanks to the push-on system the hose can be installed particularly quickly and easily – simply push it onto the matching fitting.For this hose, special push-on fittings have been developed that are easy to fit and ensure a secure connection. For higher-temperature applications, we also recommend using a hose clamp at temperatures above 70 °C.Product features:High-quality reinforced synthetic rubber hosepush-on system for particularly quick and easy installationNo complex crimping requiredHigh flexibility and durable constructionWeight-reduced and ideal for performance applicationsSuitable for the following media:CoolantOilAirMethanolLubricantsFuels E85 and E10Technical data:Minimum bend radius: 63,5 mm (2,5")Recommendation: Use a hose clamp at temperatures above 70 °CSizes:Available immediately: AN4 – AN12Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines

BOOST products hydraulic hose Dash 10 - 90cm - black nylon Premium hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -10 AN / Dash 10 / 15,9mm Inner diameter: 14,29 mm Outer diameter: 20,38 mm Working pressure (max.): 34 bar Burst pressure: 138 bar Vacuum (max.): 0,68 bar Weight: 0,293 kg/m Bend radius (min.): 101,6 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

BOOST products hydraulic hose Dash 10 - 90cm - stainless steel Premium hydraulic hose with stainless steel braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -10 AN / Dash 10 / 15,9mm Inner diameter: 14,29 mm Outer diameter: 20,24 mm Working pressure (max.): 86 bar Burst pressure: 345 bar Vacuum (max.): 0,85 bar Weight: 0,334 kg/m Bend radius (min.): 101,6 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel outer braid. Colour: Silver (stainless steel) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

BOOST products high-flow PTFE swivel hose fitting Dash 10 - 45° - black Aluminium fitting PTFE AN / Dash 10 - 45degrees - swivel - max. flow for BOOST products PTFE hoses High-quality AN / Dash hydraulic hose end fitting for E85 fuel as well as oil and pneumatic systems Thread A: -10 AN / Dash 10 male Angle 45° Version: For BOOST products PTFE hydraulic hoses Material: Aluminium Colour: Black Note: High-flow fittings offer even better flow, making them ideal for oil and fuel lines. BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

BOOST products high-flow PTFE swivel hose fitting Dash 10 - 45° - silver Aluminium fitting PTFE AN / Dash 10 - 45degrees - swivel - max. flow for BOOST products PTFE hoses High-quality AN / Dash hydraulic hose end fitting for E85 fuel as well as oil and pneumatic systems Thread A: -10 AN / Dash 10 male Angle 45° Version: For BOOST products PTFE hydraulic hoses Material: Aluminium Colour: Silver Note: High-flow fittings offer even better flow, making them ideal for oil and fuel lines. BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

BOOST products PTFE hydraulic hose Dash 10 - 90cm - stainless steel High-quality PTFE hydraulic hose with stainless steel braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 PTFE hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products PTFE hydraulic fittings For BOOST products connections with thread size: Dash 10 / -10 AN / 7/8x14" Inner diameter: 12,70 mm Outer diameter: 15,80 mm Working pressure (max.): 100 bar Burst pressure: 410 bar Bend radius (min.): 240 mm Temperature (min.) -53°C Temperature (max.) 232°C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: PTFE with stainless steel outer braid Colour: Silver (stainless steel) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

Dash 10 / AN10 PTFE hydraulic hose, braided, nylon-covered, BLACK High-quality PTFE hydraulic hose in black High-quality PTFE oil, water and fuel lines Note: the sealing olive must be replaced every time a PTFE fitting is dismantled! Otherwise leaks may occur! Price per metre. Line type: braided PTFE hoseSize: Dash 10Inner diameter: 12,95mmOuter diameter: 16,00mmMaterial: multi-layer (Teflon inner liner, stainless steel braid, nylon cover)Colour: blackWorking pressure: 206 barBurst pressure: 689 barTemperature range: -70°C to 250°CApplication: lubricating oils, fuel (petrol, diesel, E85, ethanol, methanol), coolant, hydraulic oils, nitro  

Reinforced fuel/oil hose made from synthetic rubber with stainless steel core & nylon braid – AN4 to AN20 – price per metreThis high-quality, reinforced fuel and oil hose was specially developed for applications where high performance, reliability and low weight are crucial. Ideally suited for motorsport, vehicle building, industry and many other technical applications.The hose features a flexible stainless steel inner core, which is embedded in a synthetic chlorinated polyethylene inner layer . This achieves particularly high stability and pressure resistance. The braided nylon outer sheath additionally protects against abrasion, wear and external influences while also providing weight reduction in the vehicle.Thanks to its special construction, this hose is compatible with various fitting types. Both connections with cutting ring (cutting edge) and connections without cutting ring can be used.Product features:Reinforced high-performance hose for fuel and oilFlexible stainless steel inner core for maximum stabilitySynthetic inner lining (CPE) for high resistanceBraided nylon outer sheath for protection against abrasion and wearReduced weight compared with conventional steel-braided hosesHigh flexibility and long service lifeSuitable for the following media:CoolantOilAirMethanolLubricantsE85 fuelVacuum applicationsTechnical data:Minimum bend radius: 63,5 mm (2,5")Sizes:Available immediately: AN4 – AN20Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines

Fuel/oil hose made from reinforced synthetic rubber with double stainless steel braid – AN4 to AN20 – price per metreHigh-quality Fuel and oil hose with double stainless steel braid, developed for demanding applications in motorsport, vehicle building and industry. The robust construction ensures high pressure resistance, long service life and optimum protection against abrasion and corrosion.The hose consists of a reinforced synthetic rubber inner core, which is sheathed in a double stainless steel braid . This construction provides additional stability as well as protection against external influences and mechanical stress.Thanks to its special design, this hose is compatible with a wide range of fittings. Both connections with cutting ring (cutting edge) and connections without cutting ring can be used without any problems.Product features:High-quality Fuel/oil hose with double stainless steel braidReinforced synthetic rubber inner coreHigh resistance to abrasion and corrosionVery durable and pressure resistantSuitable for various connection typesSuitable for the following media:CoolantOilAirMethanolLubricantsE85 fuelVacuum applicationsTechnical data:Minimum bend radius: 63,5 mm (2,5")Sizes:Available immediately: AN4 – AN20Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines

BOOST products PTFE hydraulic hose Dash 10 - 90cm - black nylon High-quality PTFE hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 PTFE hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products PTFE hydraulic fittings For BOOST products connections with thread size: Dash 10 / -10 AN / 7/8x14" Inner diameter: 12,70 mm Outer diameter: 17,30 mm Working pressure (max.): 100 bar Burst pressure: 410 bar Bend radius (min.): 240 mm Temperature (min.) -53°C Temperature (max.) 232°C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: PTFE with nylon outer braid Colour:Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

Lightweight PTFE fuel/oil hose with stainless steel braid – AN3 to AN10 – price per metreHigh-quality High-performance fuel/oil hose with PTFE inner tube and stainless steel braid, developed for demanding applications in motorsport, vehicle construction and industry.The hose features a flexible PTFE (Teflon) inner tube with a particularly smooth surface that enables optimum flow. The braided stainless steel outer sheath ensures high stability, pressure resistance and protection against abrasion and external influences.Optionally, the hose is also available with a additional protective coating , which protects the stainless steel braid and increases service life. Available variants:Black coatingTransparent coatingThe hose is specially designed for use with PTFE fittings developed.Available fittings:Aluminium fittings: Straight, 45°, 90°, 120°, 150°, 180°Colours: Blue/red or black⚠️ Note: The use of hose clamps are not recommended with this hose.Product features:PTFE (Teflon) inner tube for optimum flowBraided stainless steel outer braidOptionally with black or clear protective coatingVery durable and pressure resistantHigh flexibilitySuitable for the following media:Brake fluidClutch fluidFuels (including E85)oil linesSizes:Standard availability: AN3 – AN10Coated version: AN3 – AN8 (-08)Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines

-06 AN / Dash 6 male to -08 AN / Dash 8 male adapter reducerHigh-quality hydraulic fitting in blackFor oil lines, fuel lines and similarWith our hose fittings and matching hydraulic hoses, you can make up your own oil, water and petrol lines. Thanks to unique screw connections, the lines are leak-tight and pressure-resistant up to at least 35 bar without a crimping tool. We recommend -4 AN for oil feed lines (fits our GT-R feed adapters and the integrated EFR reducer) and -10 AN for oil return lines (fits our threaded return flanges). Fuel and water lines are best chosen according to the specifications of the connections or fuel pumps.The DIS fittings are simply "screwed" onto the matching hoses. Fittings labelled "swivel" remain fully rotatable after fitting. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one end swivel.Thread size one end: -06 AN / Dash 6 / 9/16x18"Thread size other end: -08 AN / Dash 8 / 3/4x16"Material: AluminiumColour: black anodisedNote: Straight hose fittings are always swivel.For trouble-free installation in all applications, we offer a wide range of adapters. This also makes it easy to extend or otherwise expand the lines later.

BOOST products connector Dash 4 female to Dash 4 female - matt black Aluminium thread adapter Dash 4 female thread to Dash 4 female thread in matt black High-quality AN / Dash thread connector suitable for E85 fuel as well as oil and pneumatic systems Thread A: -04 AN / Dash 4 female Thread B: -04 AN / Dash 4 female Material: Aluminium Colour: Matt black BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.

BOOST products connector Dash 4 female to Dash 4 female - matt silver Aluminium thread adapter Dash 4 female thread to Dash 4 female thread in matt silver High-quality AN / Dash thread connector suitable for E85 fuel as well as oil and pneumatic systems Thread A: -04 AN / Dash 4 female Thread B: -04 AN / Dash 4 female Material: Aluminium Colour: Matt silver BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.

Black Dash 6 male to Dash 6 male

BOOST products union Dash 6 female to Dash 6 female - matt black Aluminium thread adapter Dash 6 female thread to Dash 6 female thread in matt black High-quality AN / Dash thread connector suitable for E85 fuel as well as oil and pneumatic systems Thread A: -06 AN / Dash 6 female Thread B: -06 AN / Dash 6 female Material: Aluminium Colour: Matt black BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.

BOOST products Connector Dash 6 Female to Dash 6 Female - Matt Silver Aluminium thread adapter Dash 6 female thread to Dash 6 female thread in matt silver High-quality AN / Dash thread connector suitable for E85 fuel as well as oil and pneumatic systems Thread A: -06 AN / Dash 6 female Thread B: -06 AN / Dash 6 female Material: Aluminium Colour: Matt silver BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.

BOOST products union Dash 6 male to Dash 6 male - matt black Threaded union with Dash 6 male thread in matt black For connecting Dash / AN female threads Thread A: -06 AN / Dash 6 male Thread B: -06 AN / Dash 6 male Material: Aluminium Colour: Matt black BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.

BOOST products connector Dash 6 male to Dash 6 male - matt silver Threaded connector with Dash 6 male thread in matt silver For connecting Dash / AN female threads Thread A: -06 AN / Dash 6 male Thread B: -06 AN / Dash 6 male Material: Aluminium Colour: Matt silver BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.

This listing is for a QSP aluminium expander in female to male version for Dash / AN connections, in black. QSP aluminium expander in black. The adapter has a female to male design and is suitable as an expander or transition adapter between different Dash / AN sizes. The expander is suitable for applications in fuel and oil systems as well as for various motorsport, tuning and conversion projects.

BOOST products High Flow union Dash 4 male to Dash 4 male - 45° - silver Aluminium thread adapter - 45 degree - Dash 4 male to Dash 4 male for max. flow High-quality AN / Dash threaded connector for E85 fuel as well as oil and pneumatic systems Thread A: -04 AN / Dash 4 male Thread B: -04 AN / Dash 4 male Angle 45° Material: Aluminium Colour: Silver Note: High Flow fittings have an even further improved flow rate, making them very well suited to oil and fuel lines. BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.

BOOST products High Flow Connector Dash 4 Male to Dash 4 Male - 90° - Black Aluminium thread adapter - 90 degree - Dash 4 male to Dash 4 male for max. flow High-quality AN / Dash threaded connector for E85 fuel as well as oil and pneumatic systems Thread A: -04 AN / Dash 4 male Thread B: -04 AN / Dash 4 male Angle 90° Material: Aluminium Colour: Black Note: High Flow fittings have an even further improved flow rate, making them very well suited to oil and fuel lines. BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products also offers swivel fittings: those labelled "swivel" remain fully rotatable after installation. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivel.

BOOST products high flow connector Dash 6 male to Dash 6 male - 90° - black Aluminium thread adapter - 90 degree - Dash 6 male to Dash 6 male for maximum flow High-quality AN / Dash threaded connector for E85 fuel as well as oil and pneumatic systems Thread A: -06 AN / Dash 6 male Thread B: -06 AN / Dash 6 male Angle 90° Material: Aluminium Colour: Black Note: High Flow fittings have an even further improved flow rate, making them very well suited to oil and fuel lines. BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, e.g. for use on oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon braided or stainless braided, also with reinforced inner lining or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight and pressure-resistant up to 650 bar (depending on size and version) without a crimping tool. All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -06 AN / Dash 6 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturers' recommendations. Unlike other suppliers, BOOST products fittings designated "swivel" remain fully rotatable after assembly. This is essential for easy installation and often not available from cheap suppliers. Depending on the application, we recommend making at least one side a swivel.