Oil Return Flange GT / GTX / G-Series / BorgWarner EFR – 100 mm Tube – Dash 10 (AN10)

Price per metre Line type: braided hose, nylonSize: Dash 10Inner diameter: 14,2mmOuter diameter: 20,8mmMaterial: multi-layer (synthetic rubber liner, stainless steel middle layer, nylon outer braid)Colour: blackWorking pressure: 34 barBurst pressure: 138 barTemperature range: -40°C to 150°CApplication: lubricating oils, fuel (petrol, diesel, E85, ethanol, methanol), coolant Very light and flexible hose that can be used as an alternative to standard braided hoses. It connects to conventional hose barbs or via aluminium fittings on the Dash thread system.

Push-on fuel/oil hose made from reinforced synthetic rubber – AN4 to AN12 – price per metreThis reinforced fuel/oil hose made from high-quality synthetic rubber was specially developed for applications where easy installation, reliability and low weight are crucial. Thanks to the push-on system the hose can be installed particularly quickly and easily – simply push it onto the matching fitting.For this hose, special push-on fittings have been developed that are easy to fit and ensure a secure connection. For higher-temperature applications, we also recommend using a hose clamp at temperatures above 70 °C.Product features:High-quality reinforced synthetic rubber hosepush-on system for particularly quick and easy installationNo complex crimping requiredHigh flexibility and durable constructionWeight-reduced and ideal for performance applicationsSuitable for the following media:CoolantOilAirMethanolLubricantsFuels E85 and E10Technical data:Minimum bend radius: 63,5 mm (2,5")Recommendation: Use a hose clamp at temperatures above 70 °CSizes:Available immediately: AN4 – AN12Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines

BOOST products hydraulic hose Dash 10 - 90cm - black nylon Premium hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -10 AN / Dash 10 / 15,9mm Inner diameter: 14,29 mm Outer diameter: 20,38 mm Working pressure (max.): 34 bar Burst pressure: 138 bar Vacuum (max.): 0,68 bar Weight: 0,293 kg/m Bend radius (min.): 101,6 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel reinforcement and nylon outer braid Colour: Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

BOOST products hydraulic hose Dash 10 - 90cm - stainless steel Premium hydraulic hose with stainless steel braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products hydraulic fittings (not for PTFE!) For BOOST products connections with thread size: -10 AN / Dash 10 / 15,9mm Inner diameter: 14,29 mm Outer diameter: 20,24 mm Working pressure (max.): 86 bar Burst pressure: 345 bar Vacuum (max.): 0,85 bar Weight: 0,334 kg/m Bend radius (min.): 101,6 mm Temperature (min.) -40 °C Temperature (max.) 125 °C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: Epichlorohydrin (ECO) and fluoroelastomer (FKM) with stainless steel outer braid. Colour: Silver (stainless steel) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

BOOST products high-flow PTFE swivel hose fitting Dash 10 - 45° - black Aluminium fitting PTFE AN / Dash 10 - 45degrees - swivel - max. flow for BOOST products PTFE hoses High-quality AN / Dash hydraulic hose end fitting for E85 fuel as well as oil and pneumatic systems Thread A: -10 AN / Dash 10 male Angle 45° Version: For BOOST products PTFE hydraulic hoses Material: Aluminium Colour: Black Note: High-flow fittings offer even better flow, making them ideal for oil and fuel lines. BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

BOOST products high-flow PTFE swivel hose fitting Dash 10 - 45° - silver Aluminium fitting PTFE AN / Dash 10 - 45degrees - swivel - max. flow for BOOST products PTFE hoses High-quality AN / Dash hydraulic hose end fitting for E85 fuel as well as oil and pneumatic systems Thread A: -10 AN / Dash 10 male Angle 45° Version: For BOOST products PTFE hydraulic hoses Material: Aluminium Colour: Silver Note: High-flow fittings offer even better flow, making them ideal for oil and fuel lines. BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

BOOST products PTFE hydraulic hose Dash 10 - 90cm - stainless steel High-quality PTFE hydraulic hose with stainless steel braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 PTFE hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products PTFE hydraulic fittings For BOOST products connections with thread size: Dash 10 / -10 AN / 7/8x14" Inner diameter: 12,70 mm Outer diameter: 15,80 mm Working pressure (max.): 100 bar Burst pressure: 410 bar Bend radius (min.): 240 mm Temperature (min.) -53°C Temperature (max.) 232°C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: PTFE with stainless steel outer braid Colour: Silver (stainless steel) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

Dash 10 / AN10 PTFE hydraulic hose, braided, nylon-covered, BLACK High-quality PTFE hydraulic hose in black High-quality PTFE oil, water and fuel lines Note: the sealing olive must be replaced every time a PTFE fitting is dismantled! Otherwise leaks may occur! Price per metre. Line type: braided PTFE hoseSize: Dash 10Inner diameter: 12,95mmOuter diameter: 16,00mmMaterial: multi-layer (Teflon inner liner, stainless steel braid, nylon cover)Colour: blackWorking pressure: 206 barBurst pressure: 689 barTemperature range: -70°C to 250°CApplication: lubricating oils, fuel (petrol, diesel, E85, ethanol, methanol), coolant, hydraulic oils, nitro  

Reinforced fuel/oil hose made from synthetic rubber with stainless steel core & nylon braid – AN4 to AN20 – price per metreThis high-quality, reinforced fuel and oil hose was specially developed for applications where high performance, reliability and low weight are crucial. Ideally suited for motorsport, vehicle building, industry and many other technical applications.The hose features a flexible stainless steel inner core, which is embedded in a synthetic chlorinated polyethylene inner layer . This achieves particularly high stability and pressure resistance. The braided nylon outer sheath additionally protects against abrasion, wear and external influences while also providing weight reduction in the vehicle.Thanks to its special construction, this hose is compatible with various fitting types. Both connections with cutting ring (cutting edge) and connections without cutting ring can be used.Product features:Reinforced high-performance hose for fuel and oilFlexible stainless steel inner core for maximum stabilitySynthetic inner lining (CPE) for high resistanceBraided nylon outer sheath for protection against abrasion and wearReduced weight compared with conventional steel-braided hosesHigh flexibility and long service lifeSuitable for the following media:CoolantOilAirMethanolLubricantsE85 fuelVacuum applicationsTechnical data:Minimum bend radius: 63,5 mm (2,5")Sizes:Available immediately: AN4 – AN20Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines

Fuel/oil hose made from reinforced synthetic rubber with double stainless steel braid – AN4 to AN20 – price per metreHigh-quality Fuel and oil hose with double stainless steel braid, developed for demanding applications in motorsport, vehicle building and industry. The robust construction ensures high pressure resistance, long service life and optimum protection against abrasion and corrosion.The hose consists of a reinforced synthetic rubber inner core, which is sheathed in a double stainless steel braid . This construction provides additional stability as well as protection against external influences and mechanical stress.Thanks to its special design, this hose is compatible with a wide range of fittings. Both connections with cutting ring (cutting edge) and connections without cutting ring can be used without any problems.Product features:High-quality Fuel/oil hose with double stainless steel braidReinforced synthetic rubber inner coreHigh resistance to abrasion and corrosionVery durable and pressure resistantSuitable for various connection typesSuitable for the following media:CoolantOilAirMethanolLubricantsE85 fuelVacuum applicationsTechnical data:Minimum bend radius: 63,5 mm (2,5")Sizes:Available immediately: AN4 – AN20Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines

BOOST products PTFE hydraulic hose Dash 10 - 90cm - black nylon High-quality PTFE hydraulic hose with black nylon braid, for E85 fuel as well as oil and pneumatic systems Flexible -10 AN / Dash 10 PTFE hydraulic hose for DIY line building, protects against stone chips, chafing and UV radiation Length: 90cm Version: For BOOST products PTFE hydraulic fittings For BOOST products connections with thread size: Dash 10 / -10 AN / 7/8x14" Inner diameter: 12,70 mm Outer diameter: 17,30 mm Working pressure (max.): 100 bar Burst pressure: 410 bar Bend radius (min.): 240 mm Temperature (min.) -53°C Temperature (max.) 232°C Suitable for: Petrol, diesel, E85, methanol, oil and air Construction: PTFE with nylon outer braid Colour:Black (nylon) BOOST products fittings, hoses and thread adapters are suitable for a wide range of applications, such as oil, water and fuel lines, and are resistant to E85 and methanol. The fittings and adapters are CNC-machined from 6061-T6 aluminium or stainless steel and comply with the US AN and JIC industry standard specifications. The matching hydraulic hoses for the fittings are available in various versions (nylon or stainless steel braided, also with reinforced inner core or as a PTFE version). The self-sealing system originally comes from the defence and aerospace industries and has been used successfully in motorsport for decades. Thanks to the unique threaded connections, the lines are leak-tight without crimping tools and pressure resistant up to 650 bar (depending on size and version). All BOOST products hydraulic hoses are also E85 and methanol resistant. The hose fittings are screwed onto the matching hydraulic hoses. For turbocharger applications (oil/water lines), -04 AN / Dash 4 is generally recommended for oil feed lines and -10 AN / Dash 10 for oil return lines. For other line systems, such as water or fuel lines, it is best to choose according to the existing connections and the manufacturer's recommendations. Unlike other suppliers, BOOST products also offers swivel fittings labelled "swivel", which remain fully rotatable after installation. This is essential for easy installation and is often not available from cheap suppliers. Depending on the application, we recommend making at least one side swivelling.

Lightweight PTFE fuel/oil hose with stainless steel braid – AN3 to AN10 – price per metreHigh-quality High-performance fuel/oil hose with PTFE inner tube and stainless steel braid, developed for demanding applications in motorsport, vehicle construction and industry.The hose features a flexible PTFE (Teflon) inner tube with a particularly smooth surface that enables optimum flow. The braided stainless steel outer sheath ensures high stability, pressure resistance and protection against abrasion and external influences.Optionally, the hose is also available with a additional protective coating , which protects the stainless steel braid and increases service life. Available variants:Black coatingTransparent coatingThe hose is specially designed for use with PTFE fittings developed.Available fittings:Aluminium fittings: Straight, 45°, 90°, 120°, 150°, 180°Colours: Blue/red or black⚠️ Note: The use of hose clamps are not recommended with this hose.Product features:PTFE (Teflon) inner tube for optimum flowBraided stainless steel outer braidOptionally with black or clear protective coatingVery durable and pressure resistantHigh flexibilitySuitable for the following media:Brake fluidClutch fluidFuels (including E85)oil linesSizes:Standard availability: AN3 – AN10Coated version: AN3 – AN8 (-08)Pricing:The stated price applies per metre.Example: if you would like to order 3 metres please enter quantity 3 .Applications:IndustryMotorsport & racingVehicle tuningRally & off-roadCars / trucksMotorcycleAgriculture & horticultureDiesel and petrol enginesTurbo engines

Oil return gasket for Garrett GT / GT-R / GTX / G-Series & BorgWarner EFR High-quality Oil return gasket for sealing the return flange on the turbocharger. Fits numerous Garrett GT, GT-R, GTX, G-Series as well as many BorgWarner EFR turbochargers. Ideal as a replacement during turbocharger servicing, conversions or when changing to a new return flange. Details: Description: Oil return gasket Fits return flanges of various turbochargers Material: heat-resistant, oil-resistant gasket Condition: new Compatibility: Garrett GT / GT-R series: GT15 to GT37R Garrett GTX & G-Series BorgWarner EFR models Other turbochargers with identical flange pattern Perfect for maintenance, modifications and motorsport applications.

Item description For sale is a compact and efficient QSP electric oil pump with 12V DC operating voltage. The QSP QP-GEAR01 is suitable for transferring and circulating lubricating oils and viscous fluids such as water, diesel, oil or antifreeze. Among other uses, it can be used to fill differentials and gearboxes, circulate lubricating oil or drain crankcases on marine engines. The pump housing and helical gear are made of bronze, the main shaft of stainless steel and the seal of FKM. The pump is robustly built, compact in design and suitable for professional applications as well as hobby, motorsport and workshop use. The pump is designed as a circulation pump and does not build up high pressure on its own. Using a suitable oil filter is recommended. An oversized fuse can damage the motor or cause it to overheat. Product details Manufacturer: QSP Products Item Electric oil pump Model QP-GEAR01 Operating voltage 12V DC Motor power 90W Pump housing material Bronze Helical gear material Bronze Main shaft material Stainless steel Seal FKM Length 108mm Width 88mm Height 135mm Connection 2x 3/8 BSP female Maximum system pressure 2 bar Maximum viscosity 350cSt Operating temperature -10°C to +60°C Fluid temperature 120°C Opening temperature 25°C with 75W90 gear oil Opening temperature 40°C with 75W140 gear oil Self-priming only with wet gears Relative humidity max. 90% Maximum fuse 7.5A Cable cross-section 1.5mm2 Maximum cable length 2m Protection rating IP67 Mounting horizontal / vertical Application Lubricating oils / viscous fluids / antifreeze Part number QP-GEAR01 Packaging unit: 1 pieces Scope of delivery 2x hose barb 3/8 BSP to 15mm, 4x vibration damper Not suitable for Petrol Flammable liquids Liquids with a viscosity above 350cSt Corrosive chemical products Solvents Suitable for Lubricating oil Gearbox oil Differential oil Antifreeze Water Diesel Oil circuits Gearboxes Differentials Marine engines Workshop Motorsport Vehicle tuning Conversion and project vehicles

Item description For sale is a QSP oil seal for GT25 and GT28 turbochargers. Product details Manufacturer: QSP Products Item: oil gasket Fits GT25 Fits GT28 Suitable for turbochargers Packaging unit: 1 pieces Suitable for GT25 turbochargers GT28 turbochargers Oil connections on the turbocharger Motorsport Vehicle tuning Turbo conversions Conversion and project vehicles Description QSP oil seal to fit GT25 and GT28 turbochargers. The seal is ideal as a replacement seal during maintenance, repair or conversion of turbo systems. Suitable for motorsport, tuning and project vehicles with corresponding GT25 or GT28 turbochargers. Scope of delivery 1x QSP oil seal GT25 / GT28 turbo

Item description For sale is a QSP oil seal for T3 and T4 turbochargers. Product details Manufacturer: QSP Products Item: oil gasket Fits T3 Fits T4 Suitable for turbochargers Packaging unit: 1 pieces Suitable for T3 turbocharger T4 turbocharger Oil connections on the turbocharger Motorsport Vehicle tuning Turbo conversions Conversion and project vehicles Description QSP oil seal to fit T3 and T4 turbochargers. The seal is ideal as a replacement seal during maintenance, repair or conversion of turbo systems. Suitable for motorsport, tuning and project vehicles with corresponding T3 or T4 turbochargers. Scope of delivery 1x QSP oil seal T3 / T4 turbo

Item description For sale is a QSP oil seal for TD02 to TD06 turbochargers. Product details Manufacturer: QSP Products Item: oil gasket Fits TD02 Fits TD03 Fits TD04 Fits TD05 Fits TD06 Suitable for turbochargers Packaging unit: 1 pieces Suitable for TD02 turbocharger TD03 turbocharger TD04 turbocharger TD05 turbocharger TD06 turbocharger Oil connections on the turbocharger Motorsport Vehicle tuning Turbo conversions Conversion and project vehicles Description QSP oil seal to fit TD02, TD03, TD04, TD05 and TD06 turbochargers. The seal is ideal as a replacement seal during maintenance, repair or conversion of turbo systems. Suitable for motorsport, tuning and project vehicles with corresponding TD02 to TD06 turbochargers. Scope of delivery 1x QSP oil seal TD02-06 turbo

Item description For sale is a QSP oil seal for TD07 to TD67 turbochargers. Product details Manufacturer: QSP Products Item: oil gasket Fits TD07-67 Suitable for turbochargers Packaging unit: 1 pieces Suitable for TD07 to TD67 turbochargers Oil connections on the turbocharger Motorsport Vehicle tuning Turbo conversions Conversion and project vehicles Description QSP oil seal to fit TD07-67 turbochargers. The seal is ideal as a replacement seal during maintenance, repair or conversion of turbo systems. Suitable for motorsport, tuning and project vehicles with corresponding TD07-67 turbochargers. Scope of delivery 1x QSP oil seal TD07-67 turbo

Item description For sale is a turbo gasket set for T3 and T4 turbochargers. Product details Item Turbo gaskets Fits T3 Fits T4 Suitable for Turbine Suitable for Oil drain Packaging unit: 1 set Suitable for Turbochargers T3 turbocharger T4 turbocharger Turbine housing Oil drain connection Motorsport Vehicle tuning Turbo conversions Conversion and project vehicles Description Turbo gasket set to fit T3 and T4 turbochargers. The set is suitable for work on the turbocharger, particularly in the turbine and oil drain area. Ideal as a replacement gasket during maintenance, repair or conversion of turbo systems, and for motorsport, tuning and project vehicles. Scope of delivery 1x turbo gasket set T3 T4 turbine oil drain