Heater Hose - 25m - 6mm - Blue
€131.14
Available, delivery time: 3 - 4 days
Product information "Heater Hose - 25m - 6mm - Blue"
Description
Silicone heater hose for water- and ethylene glycol-based engine cooling systems.
The hose is used for connecting heating and cooling circuits in vehicles and machinery .
The stated diameter of 6 mm corresponds to Inner diameter (ID) of the hose.
The hose is supplied as a 25-metre roll .
Colour: Blue
Properties
-
Suitable for water and ethylene glycol coolants
-
High-quality, flexible silicone material
-
Temperature and ageing resistant
-
Permanently elastic
-
Ideal for heating and engine cooling systems
-
Supplied as a roll (25 m)
Applications
-
Vehicle heating systems
-
Engine cooling
-
Mechanical and plant engineering
-
Workshop and industrial applications
Technical notes
-
Inner diameter: 6 mm
-
Overall length: 25 metres
-
Colour: Blue
-
Medium: water / ethylene glycol
Technical data
Material & construction
-
Material: silicone VMQ (vinyl methyl)
-
Fabric reinforcement: polyester
-
Wall thickness: approx. 4–5 mm
-
Number of plies: at least 3 plies
(larger diameters with 4 or more plies)
Temperature range
-
Operating temperature: -60 °C to +180 °C
Mechanical properties
-
Hardness: 65–75 Shore A
-
Tensile strength: at least 6,0 MPa (N/mm²)
-
Elongation at break: at least 200 %
-
Compression set: max. 40 % (70 h at 150 °C)
Pressure ratings (depending on inner diameter)
| Inner diameter | Working pressure | Burst pressure |
|---|---|---|
| 6 – 10 mm | 10 bar | 18 bar |
| 11 – 18 mm | 7 bar | 15,5 bar |
| 19 – 28 mm | 6 bar | 11,5 bar |
| 29 – 35 mm | 4 bar | 8,9 bar |
| 36 – 44 mm | 3 bar | 7,4 bar |
| 45 – 55 mm | 2 bar | 6,1 bar |
| 56 – 65 mm | 1,5 bar | 5 bar |
| 66 – 80 mm | 1,5 bar | 4 bar |
| 81 – 90 mm | 1 bar | 2,9 bar |
| 91 – 102 mm | 1 bar | 2 bar |
Properties
-
Resistant to ageing and moisture
-
Very good weather resistance
-
UV and ozone resistant
-
Free from harmful substances
-
Good electrical insulation
-
Permanently elastic
Chemical resistance
Resistant to:
-
Dilute acids and alkalis
-
Hot and cold water
-
Hot air
-
Ozone
-
UV radiation
Limited suitability for:
-
Oils, lubricants and greases
-
OAT coolants (organic acids)
-
Organic acid based coolants
Notes on working and burst pressure
-
Working pressure: Pressure at which the hose is used in normal operation
-
Burst pressure: Maximum pressure at which the material fails
(depending on wall thickness and tensile strength)
Cutting & processing
-
The hose can be easily cut to the desired length
-
Recommendation: place a hose clamp at the cutting point and cut with a sharp knife
Dimensions & notes
-
All dimensions in millimetres (mm)
-
Stated hose diameters = Inner diameter (ID)
-
Aluminium pipes = Outer diameter (OD)
Example:
A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
| Brand: | QSP |
|---|---|
| Colour: | Blue |
| Condition: | New |
| Features: | Heater Hose |
| Inner Diameter (mm): | 25mm |
| Length: | 25m |
| Material: | Silicone |
Manufacturer:
Matching clamps
HD HOSE CLAMP, BLACK, 8-14MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 10mmSize: 8mm to 14mmPlease note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 11-17MM Strongest clamp of this type With black metal head Width: 10 mmSize: 11mm to 17mm Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 11,7mmSize: 11mm to 17mmPlease note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 13-20MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 11,7mmSize: 13mm to 20mmPlease note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 22-32MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 12mmSize: 22mm to 32mm Please note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 15-24MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 12mmSize: 15mm to 24mm Please note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 19-28MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 12mmSize: 19mm to 28mm Please note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 26-38MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 12mmSize: 26mm to 38mm Please note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
HD HOSE CLAMP, BLACK, 32-44MM Strongest clamp of this type With black metal head Hose clamp with black metal head for high-pressure applications. Can be tightened very firmly with a socket and protects the hose from damage. In no way comparable to a thin standard hose clamp.Width: 12mmSize: 32mm to 44mm Please note that silicone hoses are always measured on the inside. Add 8-10mm to the stated silicone hose size to get the outer diameter!
Similar products
Description Silicone heater hose for water- and ethylene glycol-based engine cooling systems. The hose is used for connecting heating and cooling circuits in vehicles and machinery . The stated diameter of 13 mm corresponds to Inner diameter (ID) of the hose. The hose is supplied as a 10-metre roll . Colour: Blue Properties Suitable for water and ethylene glycol coolants High-quality, flexible silicone material Temperature and ageing resistant Permanently elastic Ideal for heating and engine cooling systems Supplied as a roll (10 m) Applications Vehicle heating systems Engine cooling Mechanical and plant engineering Workshop and industrial applications Technical notes Inner diameter: 13 mm Overall length: 10 metres Colour: Blue Medium: water / ethylene glycol Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description Silicone heater hose for water- and ethylene glycol-based engine cooling systems. The hose is used for connecting heating and cooling circuits in vehicles and machinery . The stated diameter of 16 mm corresponds to Inner diameter (ID) of the hose. The hose is supplied as a 10-metre roll . Colour: Blue Properties Suitable for water and ethylene glycol coolants High-quality, flexible silicone material Temperature and ageing resistant Permanently elastic Ideal for heating and engine cooling systems Supplied as a roll (10 m) Applications Vehicle heating systems Engine cooling Mechanical and plant engineering Workshop and industrial applications Technical notes Inner diameter: 16 mm Overall length: 10 metres Colour: Blue Medium: water / ethylene glycol Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description Silicone heater hose for water- and ethylene glycol-based engine cooling systems. The hose is used for connecting heating and cooling circuits in vehicles and machinery . The stated diameter of 19 mm corresponds to Inner diameter (ID) of the hose. The hose is supplied as a 10-metre roll . Colour: Blue Properties Suitable for water and ethylene glycol coolants High-quality, flexible silicone material Temperature and ageing resistant Permanently elastic Ideal for heating and engine cooling systems Supplied as a roll (10 m) Applications Vehicle heating systems Engine cooling Mechanical and plant engineering Workshop and industrial applications Technical notes Inner diameter: 19 mm Overall length: 10 metres Colour: Blue Medium: water / ethylene glycol Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description Silicone heater hose for water- and ethylene glycol-based engine cooling systems. The hose is used for connecting heating and cooling circuits in vehicles and machinery . The stated diameter of 10 mm corresponds to Inner diameter (ID) of the hose. The hose is supplied as a 25-metre roll . Colour: Blue Properties Suitable for water and ethylene glycol coolants High-quality, flexible silicone material Temperature and ageing resistant Permanently elastic Ideal for heating and engine cooling systems Supplied as a roll (25 m) Applications Vehicle heating systems Engine cooling Mechanical and plant engineering Workshop and industrial applications Technical notes Inner diameter: 10 mm Overall length: 25 metres Colour: Blue Medium: water / ethylene glycol Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description Silicone heater hose for water- and ethylene glycol-based engine cooling systems. The hose is used for connecting heating and cooling circuits in vehicles and machinery . The stated diameter of 8 mm corresponds to Inner diameter (ID) of the hose. The hose is supplied as a 25-metre roll . Colour: Blue Properties Suitable for water and ethylene glycol coolants High-quality, flexible silicone material Temperature and ageing resistant Permanently elastic Ideal for heating and engine cooling systems Supplied as a roll (25 m) Applications Vehicle heating systems Engine cooling Mechanical and plant engineering Workshop and industrial applications Technical notes Inner diameter: 8 mm Overall length: 25 metres Colour: Blue Medium: water / ethylene glycol Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description Silicone heater hose for water- and ethylene glycol-based engine cooling systems. The hose is used for connecting heating and cooling circuits in vehicles and machinery . The stated diameter of 22 mm corresponds to Inner diameter (ID) of the hose. The hose is supplied as a 5-metre roll . Colour: Blue Properties Suitable for water and ethylene glycol coolants High-quality, flexible silicone material Temperature and ageing resistant Permanently elastic Ideal for heating and engine cooling systems Supplied as a roll (5 m) Applications Vehicle heating systems Engine cooling Mechanical and plant engineering Workshop and industrial applications Technical notes Inner diameter: 22 mm Overall length: 5 metres Colour: Blue Medium: water / ethylene glycol Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description Silicone heater hose for water- and ethylene glycol-based engine cooling systems. The hose is used for connecting heating and cooling circuits in vehicles and machinery . The stated diameter of 25 mm corresponds to Inner diameter (ID) of the hose. The hose is supplied as a 5-metre roll . Colour: Blue Properties Suitable for water and ethylene glycol coolants High-quality, flexible silicone material Temperature and ageing resistant Permanently elastic Ideal for heating and engine cooling systems Supplied as a roll (5 m) Applications Vehicle heating systems Engine cooling Mechanical and plant engineering Workshop and industrial applications Technical notes Inner diameter: 25 mm Overall length: 5 metres Colour: Blue Medium: water / ethylene glycol Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).
Description Silicone heater hose for water- and ethylene glycol-based engine cooling systems. The hose is used for connecting heating and cooling circuits in vehicles and machinery . The stated diameter of 32 mm corresponds to Inner diameter (ID) of the hose. The hose is supplied as a 5-metre roll . Colour: Blue Properties Suitable for water and ethylene glycol coolants High-quality, flexible silicone material Temperature and ageing resistant Permanently elastic Ideal for heating and engine cooling systems Supplied as a roll (5 m) Applications Vehicle heating systems Engine cooling Mechanical and plant engineering Workshop and industrial applications Technical notes Inner diameter: 32 mm Overall length: 5 metres Colour: Blue Medium: water / ethylene glycol Technical data Material & construction Material: silicone VMQ (vinyl methyl) Fabric reinforcement: polyester Wall thickness: approx. 4–5 mm Number of plies: at least 3 plies (larger diameters with 4 or more plies) Temperature range Operating temperature: -60 °C to +180 °C Mechanical properties Hardness: 65–75 Shore A Tensile strength: at least 6,0 MPa (N/mm²) Elongation at break: at least 200 % Compression set: max. 40 % (70 h at 150 °C) Pressure ratings (depending on inner diameter) Inner diameterWorking pressureBurst pressure6 – 10 mm10 bar18 bar11 – 18 mm7 bar15,5 bar19 – 28 mm6 bar11,5 bar29 – 35 mm4 bar8,9 bar36 – 44 mm3 bar7,4 bar45 – 55 mm2 bar6,1 bar56 – 65 mm1,5 bar5 bar66 – 80 mm1,5 bar4 bar81 – 90 mm1 bar2,9 bar91 – 102 mm1 bar2 bar Properties Resistant to ageing and moisture Very good weather resistance UV and ozone resistant Free from harmful substances Good electrical insulation Permanently elastic Chemical resistance Resistant to: Dilute acids and alkalis Hot and cold water Hot air Ozone UV radiation Limited suitability for: Oils, lubricants and greases OAT coolants (organic acids) Organic acid based coolants Notes on working and burst pressure Working pressure: Pressure at which the hose is used in normal operation Burst pressure: Maximum pressure at which the material fails (depending on wall thickness and tensile strength) Cutting & processing The hose can be easily cut to the desired length Recommendation: place a hose clamp at the cutting point and cut with a sharp knife Dimensions & notes All dimensions in millimetres (mm) Stated hose diameters = Inner diameter (ID) Aluminium pipes = Outer diameter (OD) Example: A 51 mm silicone hose (ID) fits an aluminium pipe with 51 mm outer diameter (OD).